For those of you thinking about replacing the plexi in the Elite amps this will be helpful.

Should be in 1-2 weeks.

Here are some specs on the amp. Ti2 1600.5 SPECIFICATIONS FRONT AND REAR CHANNELS: Frequency Response: ± 1dB from 20Hz to 20kHz Signal to Noise Ratio: >100dB Crossover Slopes: 12dB per Octave Front High Pass Crossover Range: 20Hz to 4kHz Rear High Pass Crossover Range: 20Hz to 4kHz Rear Low Pass Cro...

http://www.12voltnews.com/2013/05/21/nu ... s-members/

This was something that I was able to help out with last weekend.I was proud to be a part of it and thought I should share it with you guys.

The enclosure for the iAmp-gm1 is for use in the non convertable Camaro. How ever there is the iAmp-GMC, which includes the amp,harness, and all the dsp features. There is no enclosure or sub included. This allows you to use the amp in a convertable with your own sub and enclosure.

3200 is an RMS rating. These amps are highly underated.

Another video from the drive to the show.

http://www.youtube.com/watch?v=iOaXZe-x ... r_embedded

Here is a video from the Summer Nationals in Australia. 12 Elite 12's off of 6 Elite.1's. Enjoy!

Good job Stinger Australia!



http://www.youtube.com/watch?v=avtF0b5p ... r_embedded

Here is a birth certificate from 1.

Yes, it is the same size as the other amps in the Elite line.

The link worked for me!

The Elite amps are currently shipping. The components and subs should be arriving soon.

Morgan I hope you enjoy sunday! I had a blast Saturday, as you saw.

71/8 mounting depth

11 1/4 mounting diameter.

No problem guys. Let me know if I can help out on any other ?'s you may have.

Yes I am R&D for PG/AAMP. I got that info via Skype from Morgan.

Sealed specs

SPL .75
Normal 1.2
SQ 1.6

OK here you go Elite 12 ported specs.

SPL

1.75 volume
2.5x12 (in.) port opening
34 (in.) lenght
tuned to 36hz

NORMAL

2.25 volume
2.5x12 (in.) port opening
31.5 (in.)lenght
tuned to 33hz

SQ
3.0 volume
2.5x12 (in.) port opening
28 (in.) lenght
tuned to 30hz

I have not seen any specs yet I will see if I can get them and I will post when I get them. If Morgan doesn't beat me to it!

The Elite.12d has a power handling of 1600w RMS-3200w PEAK. The ELite will be offered in a dual 4ohm voice coil set-up.