From personal experience they do not like anything over 6v.

What rev is this M100 all the ones I have ever owned and seen have had the gold exposed trace boards. This one looks the same but with different resisters near the torrid and green board coating. And I will need a new speaker/power terminal if any of you have some extra's laying around let me know! ...

You do some nice work, drop me a quote to do the shells for 2 M50's M25 M100 and a M44!


It doesnt have to be OEM look you can do whatever you want make it creative! I need to come up with a color scheme, I really like the Red/Gold heatfins.

Ok, so I have 2 M50's 1 M44 1 M25 and a M100.

Has the silk screening for these amps been perfected? A couple of them look ok but I kind of want to change the color and same with the logo art work too.

Thanks Bryan for being the Middle Man for my M50 purchase in P-compton!

Lil ladies all in a row!

Post the part numbers here and I'll make a spread sheet.

Has someone made a spread sheet with each Phoenix Gold amp and what caps are needed to be replaced and the part number/numbers associated for the new replacement caps? I did a quick search and didnt really find anything, I think I need to wipe my cookies sometimes the search works great other times ...

I ended up getting them and sold one of the 400.4's instantly to a friend.

I think I am going to flip these and find a nice 5/6 channel I really dont want to wire 3-4 amps to be honest lol I r lazy anymore!

I have a 400.4 and a 500.2 going to sell my M44 and M25 aswell

M50 senior year of high school 1994!

Sold it about 4 years ago, regret it!

I've got 4 currently (1200.1, 2x 600.4, 300.2) and organized 3 for a mate... I'd get more if I could get my hands on them! i have two 1200's for sale here at shop http://phoenixphorum.com/viewtopic.php?f=8&t=14765&hilit=tantrum Only thing I have agenst the 1200's are the Tripath chip and th...

ttocs wrote:getting ready to rock a roadster myself.

Yeah thats the one I want but not finding one at this point, I havent heard anything back from the one member here that found that one at the pawnshop.

Looking for folks who have had hands on experience with these.

I have a chance to get 3 of them 2 4 channels and a 2 channel for a pretty good trade deal.

How are these compaired to the other PG amplifiers ect ect.


Pro's and Con's please

thanks!

Its all good I have a 500/1 sitting here at my disposal.

I just got a PM from a forum memeber about a R66 so I'll see how that play's out

Straight from the JL slash series manual. IMPORTANT: If you connect a load higher than 4Ω nominal per channel in stereo mode (or 8Ω in bridged mode), power will drop by half with every doubling of impedance above 4Ω stereo / 8Ω mono. If you connect a load lower than 1.5Ω nominal per channel in stere...

Yeah I am waiting to hear back about that one in the classifieds in the pawn shop.

Just going to be hard to give $$$ out on an amp that has no history.

I really want a PG Roadster 66 but having a time trying to find one and I am not going to pay a gouge price.

I might just do the JL for now and find a 66 later down the road.

1.5-4ohm from what I recall.

I was also looking at the JL HD 900/5 but damn thats spendy

I am thinking about picking one of these up.

Think the sub channel would be more then enough to push a Cyclone at 8hm?

the sub channel is 250rms 1.5-4ohm 11-14v.

Question.

The consensus here states that the highest you can cross the Cyclone off is 50hz since it cannot play above 50hz

Why does the manual state crossing off at 60hz is optimal?

Anyway I didn't see anything special, fuse was fine too. Right now running a blaupunkt amp in the same set. Fuse is fine, headunit is fine... E: So I tried the amp with a power supply and used a jumper for remote, red led "OVR" flashed but then nothing... E2:For some reason there is aroun...

open the M25 there should be an internal fuse near the power term check it.

if its still good then you toasted the amp/deck.

Yeah I am going to need a very shallow 8" midbass if I am going to do pods in the kick's.

I was looking at those daytons aswell.

What midbass driver size would you suggest to comp the Cyclone? I was thinking 2 8" in the kick ex'd at 80-50 and have the 6.5 at 80 and above.

Thanks!

haha I was going to ask if you did that or had the remote wire on the power anntena power wire off the deck!