the small ones are usually 85°. I would replace them with 105° caps if they are available. It would be best to leave some space between the big hot resistors and the new caps or lift them up but that can spoil the clean factory look.

Hi Ttocs
Im not an expert at all but I change them when:
- the foil is shrunk
- the top of the cap is not flat but around
- they leak but this happens only with the bigger type of caps IMHO
- when they are dent

all the parts on the M100 section are back on the PCB. Couldn’t wait to power up the amp. First I used a 5A fast blowing fuse but just before the green LED came on it popped. Than I used a 10A fuse and the green LED came to life. Just before the green LED light's up it draws almost 20A just to switc...

Hi ttocs

this is the one. Or maybe there is a possibility to repair it?

Hello forum members. Thanks Jason for the help and advice. The repair takes allot of time but now there is some progress: I used copper foil to bridge the gaps. The transfo is until now the most difficult part to put back on the pcb board. I used a clear overcoat pen to protect the damaged parts on ...

Jason,
thank you for sharing your knowledge and expertise.
the irfz44zpbf 's are on the way. I think I have all the components now to continue this repair

Hello Jason

thank you for this information and time, it's just I had some irfz48 left from upgrading a ZPA.
I will order IRFZ44NLPBF can you confirm that these are ok?

thanks
Peter

Nobody?

Thank you Bertje for the clear pictures!!

If I change the IRFZ44 to IRFZ48 in the M100 en M50 section do I need to change the gate resistors to another value?
If so what are these for the M100 and M50 section?

Hallo Bertje

yes I used clear epoxy (5min. Power epoxy from Pattex)
Thank you for checking the components.

The gate resistors for the M100 part are 100 Ohm. Does anybody know how many watt these are?
Diodes are 1N5401 3A 100V.
The little blue ceramic capacitor, is this 0.47µf? How many volts?

Taking the bad parts out...

Hello forum tech's. Years ago my beloved Outlaw gave up. It will be a big repair job I know but there are members who have done this before. I need info on components I need to replace. Things that are already on my list to replace are: - psu caps - IRFZ 48 - gate resistors: can someone give me the ...

Hello forum members Many, many years ago I bought a dead ZPA amp wanting to restore it but never got the time. Well, now it finally happened. I started to search this forum, for many hours, and found all the needed info to complete this job. Many thanks to all the forum members who put their time an...

Bought some zpa plexi's and one of them had some issues. He shipped me another one without extra charges. Not many people would do this. Very recommended!

Bought some ZPA items from Keith. We had good, fast communication and he wants to do it right. Packing could not been better, bomb proof. This was a smooth transaction, I' m happy with it. I can highly recommend Keith.

Looks good!
I prefer clear plexi with gold logo, is this so difficult to make?

I don't have pictures of the show car but I have some of the amp they used in the BMW850I. This is a dual ZX Ti 600.

this is all I have for the SS10R:

Hi Justin

in PDF file some examples of good designs. If you need more let me know.
Regards