98 Outback Install

Have a cool car stereo? Post your install pictures here! No PG? No problem! Competition grade or sub-in-box setups: ALL are welcome!
Post Reply
User avatar
Wrennagade
Posts: 491
Joined: Sat Nov 13, 2010 6:57 pm

98 Outback Install

Post by Wrennagade »

So I've been meaning to post my install. It's a little ghetto being my first attempt at a custom setup so bear with me...
Attachments
So here's my car.
So here's my car.
Ti BASS Cube
Ti Powercore 15
Ti DD10
Ti Fuseblock(Power)
1xTi500.4(Thanks Brian!)
1xTi1200.1
2xTi X-overs/1x Ti Tweets
1xReactor
1xTi 12EliteD
MS1000TA(Black)
Alpine 3339 EQ
Pioneer MVH P8300BT
Top
User avatar
Wrennagade
Posts: 491
Joined: Sat Nov 13, 2010 6:57 pm

Re: 98 Outback Install

Post by Wrennagade »

Just checking my pic sizing before submitting the rest...
Attachments
And finally my solution to roof rattling!! Now my wife can't bitch about me driving around with no spare!
And finally my solution to roof rattling!! Now my wife can't bitch about me driving around with no spare!
IMAG0258.jpg (101.16 KiB) Viewed 3955 times
I was able to hide the brain in one of the small compartments in the back.
I was able to hide the brain in one of the small compartments in the back.
IMAG0233.jpg (82.61 KiB) Viewed 3955 times
One of my most recent additions.
One of my most recent additions.
IMAG0232.jpg (88.99 KiB) Viewed 3955 times
Had to have my sound tech check the settings for me...
Had to have my sound tech check the settings for me...
My first awesome looking fiberglass/mdf box holding my sub. Good experience tho.
My first awesome looking fiberglass/mdf box holding my sub. Good experience tho.
My two XS amps reside in the upper region above the spare tire well. I have 4 fans keeping them cool (push/pull) when system is on.
My two XS amps reside in the upper region above the spare tire well. I have 4 fans keeping them cool (push/pull) when system is on.
Finally I cut out grill and tacked edge down a little bit.
Finally I cut out grill and tacked edge down a little bit.
Carpet...
Carpet...
I dremeled out a layer of the plywood so my grill would be flush with the wood and glued/ stapled it down. I then adhered a piece of window screen to the under side to hide the woofer a 'lil more.
I dremeled out a layer of the plywood so my grill would be flush with the wood and glued/ stapled it down. I then adhered a piece of window screen to the under side to hide the woofer a 'lil more.
Here's the plywood I cut to mimic the stock floor. It's resting on short 2x4 lengths.
Here's the plywood I cut to mimic the stock floor. It's resting on short 2x4 lengths.
Excelon deck, used to have my Alpine 3339 eq under it...damn thieves.
Excelon deck, used to have my Alpine 3339 eq under it...damn thieves.
IMAG0235.jpg (90.57 KiB) Viewed 3955 times
Ti BASS Cube
Ti Powercore 15
Ti DD10
Ti Fuseblock(Power)
1xTi500.4(Thanks Brian!)
1xTi1200.1
2xTi X-overs/1x Ti Tweets
1xReactor
1xTi 12EliteD
MS1000TA(Black)
Alpine 3339 EQ
Pioneer MVH P8300BT
Top
User avatar
Wrennagade
Posts: 491
Joined: Sat Nov 13, 2010 6:57 pm

Re: 98 Outback Install

Post by Wrennagade »

Shit! They're all backwards. Start at the bottom I guess. Sorry....
Ti BASS Cube
Ti Powercore 15
Ti DD10
Ti Fuseblock(Power)
1xTi500.4(Thanks Brian!)
1xTi1200.1
2xTi X-overs/1x Ti Tweets
1xReactor
1xTi 12EliteD
MS1000TA(Black)
Alpine 3339 EQ
Pioneer MVH P8300BT
Top
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:
Contact stipud

Re: 98 Outback Install

Post by stipud »

Wrennagade wrote:Shit! They're all backwards. Start at the bottom I guess. Sorry....
:lol: yeah it does that. I can switch it around but then all the old posts and FAQs would get messed up...

For your first install that is pretty damn good I'd say! Maybe paint the plywood black so it doesn't stand out, and add a small cover so you can't see the gap at the bottom of the trunk. Also dust and crud will get on the sub, so you might want to get some speaker cloth material, but install it under the grill so it doesn't get torn up.
Top
User avatar
Wrennagade
Posts: 491
Joined: Sat Nov 13, 2010 6:57 pm

Re: 98 Outback Install

Post by Wrennagade »

Good idea about the speaker cloth... I wanna put a 2x4 in the gap and install a lock into the hinged board eventually. Thanks for the props, appreciate it. :D
Ti BASS Cube
Ti Powercore 15
Ti DD10
Ti Fuseblock(Power)
1xTi500.4(Thanks Brian!)
1xTi1200.1
2xTi X-overs/1x Ti Tweets
1xReactor
1xTi 12EliteD
MS1000TA(Black)
Alpine 3339 EQ
Pioneer MVH P8300BT
Top
Post Reply

Return to “Installs”