mr tatooemil,tattooemil wrote:actually here is my layout....anyone spot problems/improvements? ....what would YOU use as frequencies at the zpx2 (im thinking 60/80 and 300 )
first of all, i sended you an email. check it out one time please.
about you're install, just one remark, except of the time alignment, why do you need the zpx2 ?
with the internal crossovers of the ti amps, you can go full active. you don't even need the passive filters between tweeter and 6.5.
check the manuals of the amps....
the crossoverpoints is adjustment in your vehicle, difficult to say before....listen and adjust.....
knowing the 8.4lf very good, had them for then years and longer i quess, i would use a 5 inch in stead of the 6.5.....
In some cars it is possible to mount tweeter and even a 5 inch in the pillar pods(Apods) on the dash.......
In that situation u can use the full (sound deatened) door as an enclosure for only the 8.4lf's.....
but i might look into putting the wires inside the bodywork and not just behind the plastic covers
ITS ALIVE.......just need to improve the signalcables....but i just had to get it running today.......more pictures to come during the weekend.....
