planning my install

tattooemil · Post by **tattooemil** » Fri Jun 29, 2012 1:04 pm

planning my first serious install.....what do you think??? ..some things that should be changed??? input wellcome...

tweeters-6.5" and 8 " in front doors......12" in back.....

ms 2125 will be changed for another zxti600 when i stumble across it.....

should i put another 6.5" in back?

Post by **ttocs** » Fri Jun 29, 2012 1:35 pm

it will be hard to match two subs running off of different amps.

Post by **AVICJR** » Fri Jun 29, 2012 1:37 pm

ttocs wrote:it will be hard to match two subs running off of different amps.

Agreed! If you get another ZX600Ti then 1 to each sub or both subs running off the solo MS2125.

Post by **ttocs** » Fri Jun 29, 2012 1:38 pm

tough call as to which I would want between the zx and ms line

tattooemil · Post by **tattooemil** » Fri Jun 29, 2012 1:56 pm

i know its not the ideal choise...and the ms is only untill i get hold of another 600......but not many for sale in denmark

running both subs on the ms is not an option i wanna choose.....then it would go in 1ohm.....(dual 4ohms subs)

Drock · Post by **Drock** » Fri Jun 29, 2012 2:50 pm

Why not just find a nice mono amp that can handle a single ohm? Instead of running multiple amps. I have an rsd1200.1 pushing 4 ti10d4's at 1ohm.
Alot of people don't seem to like the looks of these (I do), I have gone up and down the hi way several times now on an 8 hr road trip and worked the subs hard. The amp did not shut down once.
Even the ti800.1 handled two dvc's efertlessly.

Post by **ttocs** » Fri Jun 29, 2012 2:56 pm

cool I have been wondering how my RSD 1200.1 would run on my 3 rsdc 10s at 1 ohm. I am going to have a fan on it but sounds like its a forcast of as much bass as I want.

Would it be cheaper on import taxes to send you the amp in two pieces listed as parts or would shipping kill that though?

Drock · Post by **Drock** » Fri Jun 29, 2012 8:32 pm

I would just ship it together if you can pack it very well. Thanks

Drock · Post by **Drock** » Fri Jun 29, 2012 8:35 pm

Lol. My wife bought an antique sink from like Florida or something awhile ago. It was like 225 pounds. The sink was $250, but shipping was $900 when I picked it up. So I learned my lesson the hard way.

Drock · Post by **Drock** » Mon Jul 02, 2012 8:28 pm

Hey guys. I have a question. I'm designing my box on paper here. I will be using four ti10d4's. From what I can figure these are 100% at 1.25cu ft ported. Because of the limited space in my truck I can squeeze a total of 5 cu ft of volume but I cannot build individual chambers. My question is do I still calculate volume based on individual specs per driver. Or is it less because the subs will be using common space.
This is the first time I've built an enclosure like this so I just want to get your opinions.
Thanks

Drock · Post by **Drock** » Mon Jul 02, 2012 8:50 pm

PhuckinGood · Post by **PhuckinGood** » Tue Jul 03, 2012 3:12 am

tattooemil wrote:i know its not the ideal choise...and the ms is only untill i get hold of another 600......but not many for sale in denmark

running both subs on the ms is not an option i wanna choose.....then it would go in 1ohm.....(dual 4ohms subs)

I have a zx600ti in the UK not perfect but okay, not sure what the postage is, maybe a swop deal?

Drock · Post by **Drock** » Tue Jul 03, 2012 6:09 am

Sorry I just realized I put my post in the wrong thread. Oops

tattooemil · Post by **tattooemil** » Tue Jul 03, 2012 12:51 pm

PhuckinGood wrote:
tattooemil wrote:i know its not the ideal choise...and the ms is only untill i get hold of another 600......but not many for sale in denmark

running both subs on the ms is not an option i wanna choose.....then it would go in 1ohm.....(dual 4ohms subs)
I have a zx600ti in the UK not perfect but okay, not sure what the postage is, maybe a swop deal?

can i find you on facebook?... im martin emil christensen .... www.facebook.com/martin.e.christensen.73

tattooemil · Post by **tattooemil** » Sun Jul 22, 2012 1:48 am

got hold of some extra ti gear....so this is the first pictures of my install....

1 475ti for front and rear
2 600ti for 2 12" xmax

still remaining in stock is a 475ti (maybe for some 8" mid subs in front doors) and a 600ti (maybe 1 extra 12" xmax instead of spare wheel)

but man its loud allready....

Drock · Post by **Drock** » Sun Jul 22, 2012 5:39 am

Cool. I bet it will look great when your done. I like the idea of stacking the amps.

Post by **ttocs** » Sun Jul 22, 2012 6:17 am

what are the black thinks holding the shelf up with?

tattooemil · Post by **tattooemil** » Sun Jul 22, 2012 1:13 pm

the black things...uhm just wire tie´s that´s not been cut off yet

......the shelfs is resting on "forks" from stainless steel i will snap some more shots of the installation during the finish.....first off all i need to have measured if the main power wire can take one more amp.. 50# ( 0 awg) wire with 200 amp fuse.....

ludeboost98 · Post by **ludeboost98** » Tue Aug 07, 2012 2:33 am

Great job , Can I put a recommendation in ? I would angle those boxes to eliminate cancellation , or just not fire them not straight at each other . Keep up the good work !

tattooemil · Post by **tattooemil** » Wed Aug 08, 2012 10:44 am

sad news....just crashed my car a week ago.

.....

.....its amazing all the time it took to install...just took me 30 minutes to pull it apart before the car was towed away....
my new ride is a vw transporter (t4) ....but its gonna stock the same amount of amps and speakers...but this time in that little drivers cabin....

phoenixgold79 · Post by **phoenixgold79** » Fri Nov 09, 2012 1:13 pm

get a mono amp maybe 1200.1 ti

threw away the 4ch ti

use the ms on the midbass and the ti600 on the mid/high chapeu

tattooemil · Post by **tattooemil** » Sun Nov 11, 2012 1:58 am

got new plans....i been chasing for amps lately and got hold of some gear...so this is the new plan....
2* 600ti running 2* 12" xmax subs....
1* 1000.2ti running 2* 8" midbass
2* 475 running front components

all split by eq and 406

Drock · Post by **Drock** » Sun Nov 11, 2012 7:21 am

That's lots of amps. Lol

tattooemil · Post by **tattooemil** » Sun Nov 11, 2012 10:36 am

its a big car

tattooemil · Post by **tattooemil** » Sun Nov 11, 2012 11:03 am

actually here is my layout....anyone spot problems/improvements? ....what would YOU use as frequencies at the zpx2 (im thinking 60/80 and 300 )