Peugeot 206 - Alpine, Audison, Dynaudio,

luigi66 · Post by **luigi66** » Fri Aug 17, 2012 4:41 am

This is my old system when I still had not the alpine f1 7990 and its pxa h 900 converter.
Even amplifiers Audison have been replaced by the magnificent phoenix gold ms.

holmis · Post by **holmis** » Fri Aug 17, 2012 5:16 am

Cool build Luigi

Post by **ttocs** » Fri Aug 17, 2012 5:35 am

lookn good.

luigi66 · Post by **luigi66** » Fri Aug 17, 2012 5:37 am

holmis wrote:Cool build Luigi

Hello and thank you take this opportunity to ask you something.
I have read this post http://phoenixphorum.com/viewtopic.php?f=8&t=21478 you did the covers for phoenix gold right?
I ask are screen printed or laser engraved?
thanks Luigi

luigi66 · Post by **luigi66** » Fri Aug 17, 2012 5:42 am

ttocs wrote:lookn good.

Thanks for the compliments though now the system is a little bit changed .. we are the phoenix instead of audison that to tell the truth even if they are produced by me here in Italy I find them a bit delicate though musically compelling.
In my opinion the best products from Audison amplifiers are the 100 hr, hv 20, 30 hv, hv 16.
Greetings Luigi

holmis · Post by **holmis** » Fri Aug 17, 2012 6:04 am

luigi66 wrote:
holmis wrote:Cool build Luigi
Hello and thank you take this opportunity to ask you something.
I have read this post http://phoenixphorum.com/viewtopic.php?f=8&t=21478 you did the covers for phoenix gold right?
I ask are screen printed or laser engraved?
thanks Luigi

I only made the logo, Joerg mounted them on the plexi for the MS1000.
The gold PG logo are made in thin Gold metal vinyl. Cut by a knife cutter/plotter. Then

luigi66 · Post by **luigi66** » Fri Aug 17, 2012 6:24 am

holmis wrote:
luigi66 wrote:
holmis wrote:Cool build Luigi
Hello and thank you take this opportunity to ask you something.
I have read this post http://phoenixphorum.com/viewtopic.php?f=8&t=21478 you did the covers for phoenix gold right?
I ask are screen printed or laser engraved?
thanks Luigi
I only made the logo, Joerg mounted them on the plexi for the MS1000.
The gold PG logo are made in thin Gold metal vinyl. Cut by a knife cutter/plotter. Then

I realized I only found this logo here on the site:
https://skydrive.live.com/redir?resid=D ... etgGKzW2Ls

But I liked the original logo but I could not find anywhere.

holmis · Post by **holmis** » Fri Aug 17, 2012 6:28 am

What do you need it for ? Frank Amp`n Stein or MS1000 (2xMS2250) ?

luigi66 · Post by **luigi66** » Fri Aug 17, 2012 6:45 am

holmis wrote:What do you need it for ? Frank Amp`n Stein or MS1000 (2xMS2250) ?

I need the original logo Amp'n Frank Stein.

cimio80bmw · Post by **cimio80bmw** » Fri Aug 17, 2012 1:12 pm

it's nice to see here on the forum photos of one of the machines that I have worked to achieve a few years ago with my dear friend Roberto!! mah???? since you changed your name?????

cimio80bmw · Post by **cimio80bmw** » Fri Aug 17, 2012 1:38 pm

but in my opinion the photo and the site of the installer that was made the system seem to be installed in the upright a medium cone (Hertz HL70) and a middle dome as MD140 / 2 Dynaudio ...... or am I wrong??

cimio80bmw · Post by **cimio80bmw** » Sat Aug 18, 2012 12:33 pm

ops that strange photos are gone ..... who knows why!!!!!!!

Peugeot 206 - Alpine, Audison, Dynaudio,

Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,

Re: Peugeot 206 - Alpine, Audison, Dynaudio,