Phoenix Gold Phorum

Well... i would like to share some to.. From Denmark!

My install / build goes in a Chevrolet Impala Custom 1965 2.Dr Hardtop.

I did alot of carstereo in the 90´s, and now that im almost 40yr, i put together some of the best gear i purchased through the years.
So, here is the goodies!
2 x Phoenix Gold 1000.2 Titanium Custom Nickel for Sub´s
1 X Phoenix Gold Outlaw Limited Edition for Mid´s & Tweet´s ( Front & Rear ) <----on Retirement, upgraded to two PG 600.2Ti
2 X Phoenix Gold Titanium Powercore 15 Farad
1 X Phoenix Gold Tantrum powercore 10 Farad ( Burned up ) RIP )
2 X Phoenix Gold Titanium Voltmeter´s
1 X Phoenix Gold Display ( Powered by Phoenix Gold led´s ) <---- Won on Ebay last week.. yiiiiiiiir!!
1 X Phoenix Gold 200Amp Circuit breaker
30Ft Zeropoint series 0g Cable positive
15Ft Zeropoint series 0g Cable Negative
150 Ft 12g speaker cable
LPL-44 Low pass control cable
4 X Zeropoint 900 series RCA cables
-----------------------------------
NON PG stuff as follow:
Pioneer Deh-P88-RSII Headunit
Samsung LED 22" HD-TV
Playstation 3

Speakers and sub´s:
2 X JBL GTI 12" W2 4000Watt
8 X 600 JBL Gti MKI Mid´s / Midbass
4 X 500 JBL Gti MKI Mid´s
2 X 404 JBL Gti MKI Mid´s
4 X 08 JBL Gti MKI Tweet´s

RATTLE MAT 80mil sounddeadner 70 Sqft

All Speakers are from " The past".. and still going strong after 20 years!
Subs though is from the 20Th century

Well, this is my build, and it took me about an year ( only car stereo ) .. and now it has won several trophy´s in EMMA competition´s and Custom car shows in Scandinavia.
Thank you for your time to show my dream!

Haven´t got any pictures from the trunk build up... ! my Canon was ad repair!

The 12" woofer grill are hand made, took me about 30 hours!!

All the leather job is done by a friend of mine..


Well... Im sure som of you guy´s like it.

My family and i sure do...

Cheers, And merry Christmas out there

Beautiful work and car bro ...glad to see another "Bow Tie" brother on the site.

Very nice work! All you need now is a ti bass cube to go with it.

dvnt88 : Bow tie is THE S**T.. love my Chevy!


Wooferdog:

I never did understand the need´s of Bascube..? ( remember this is a SQ system )
PLease do tell me why.. and how it would effect my system?


Thanks..
i´ll share some more foto´s later of : Rattle mat install /Rear Side panels construction( not finished yet ) and Nickel Titanium 1000.2

Currently i am building rear side panels in fiberglass, with leather and red Alcantara layer on top..
( those speaker´s that i was looking for in buy and sell.. found it, and started creating dirictly. ) 600Gti and 500Gti with 08Gti tweets.... Then im curious about the PG outlaw.. running all the mid and tweets.. im pretty sure it down to 0,5 ohm.. so.. cross my fingers and hope it´s doing the job.. ( it´s only mid´s and tweets )

Cheers.
Corty75

------------------
Phoenix Gold, just listen to it!

Engine compartment... Train Horn is soooooo fun to use ( inside showrooms )

That's an amazing install!

A train horn has been on my to do list for my truck for a while too. LOL

As we say in Denmark.. The sofa in front!

Blue (pg ) floor light led´s.. ( Why not )

Kirghiz wrote:That's an amazing install!

A train horn has been on my to do list for my truck for a while too. LOL

Thanks
Maaaan it´s funny dude.. Imagine all the guy´s around the car.. and then Blow the horn!! ..

Im having a blast of fun when crusing this baby down town!..

If it ain't Chevy ...it ain't shit ....been a "Bow Tie" fan since Highschool and have owned several Chevy's. 1st was a '68 Camaro SS with a 396 and currently have a '97 Camaro Z-28 30th Anniversary Edition ...Will be buried in her if I have my way.
A BassCUBE will definitely help in any situation ...especially SQ installs ...Have an Elite.5 running an IDMAX10D4v3 with a BassCUBE and it's night and day. The sub is in a 1.0cuft^3 sealed box and is the best sounding sub I've heard to date, but may be lookin' for an Elite12D2 to run off the Elite at 1ohm for grins . Below is my pride and joy ...

BOW TIE......!!!!! Cool rims though..
What happend with the Camaro 68?

The sound of V8.. just love it!..

I could wright down 400 pages about my engine build.. another day..

Bass Cube? what does this thing.. how does it work?

The basscube is a really good piece for dialing in the bass,some links below so you know what it does and it does it so good.I have one in both my Chevy's and also one on my garage sub just for the added punch when working on stuff outside.

http://download.phoenixphorum.com/Manua ... Manual.pdf

http://download.phoenixphorum.com/Manua ... ecrets.pdf

Corty75 wrote: BOW TIE......!!!!! Cool rims though..
What happend with the Camaro 68?

The sound of V8.. just love it!..

I could wright down 400 pages about my engine build.. another day..

Bass Cube? what does this thing.. how does it work?

Wish I still had the '68 ...Went into the Navy after Highschool and like a fool I sold it before going over seas for 2 years . Plan on doing another '68 soon (SS) ...just need the time . Gonna drop in a Ramjet 502 or a newer LSX454, but will be based on the trans I go with (Want a manual as Automatics to me are boring and is more to have go wrong / break).
My Z isn't stock as I've done quite a bit of work to her and in the near future she's gonna have a blown Pro-Charged 383 stroker (Currently has the Corvette LT-1, M6 ) runnin' 3.73 or 4.11 gears with a Mosier 33 spline 12 bolt rear end . She's my daily driver ...so I gotta be a little gentle with her.

wooferdog wrote:The basscube is a really good piece for dialing in the bass,some links below so you know what it does and it does it so good.I have one in both my Chevy's and also one on my garage sub just for the added punch when working on stuff outside.

http://download.phoenixphorum.com/Manua ... Manual.pdf

http://download.phoenixphorum.com/Manua ... ecrets.pdf

Well.. it seems like it´s a "MUST HAVE" in my install..

Wooferdog to the resque right??!!
Hock me up man.... .. i need this Cube!!

dvnt88 wrote:

Corty75 wrote: BOW TIE......!!!!! Cool rims though..
What happend with the Camaro 68?

The sound of V8.. just love it!..

I could wright down 400 pages about my engine build.. another day..

Bass Cube? what does this thing.. how does it work?

Wish I still had the '68 ...Went into the Navy after Highschool and like a fool I sold it before going over seas for 2 years . Plan on doing another '68 soon (SS) ...just need the time . Gonna drop in a Ramjet 502 or a newer LSX454, but will be based on the trans I go with (Want a manual as Automatics to me are boring and is more to have go wrong / break).
My Z isn't stock as I've done quite a bit of work to her and in the near future she's gonna have a blown Pro-Charged 383 stroker (Currently has the Corvette LT-1, M6 ) runnin' 3.73 or 4.11 gears with a Mosier 33 spline 12 bolt rear end . She's my daily driver ...so I gotta be a little gentle with her.

thats a serious daily driver dude..

4.11 gears??.. you will need lock up tranny for the 383 pro charged engine though!.. ( 4l80E or 4l60E ) as the th700r4 is only capable up to 600HP and torque.

Mine is 406 SBC, Nitrous and 4L60E Mad dag stage 2 tranny. B&M controlled.. Progresive nitrous system 250HP
Moser M9 Back brace rear end, 35Spline and alloy third member with detroit locker and 3.90 gears. wilwood upgraded brakes.
3"Alloy driveshaft ..
Remember this is a fullsize 2400 Kilo´s car.. and it still goes 8,2 in the 1/8 mil. WITHOUT NITROUS!! ( Hoosier Qiuck time pro dot 27" X 15 )..

Well.. this could go on and on and on... let´s stick to the ICE! ..

Found some more photo´s from the build..

This is trunk construction/ Build and rattle mat install

Very nice.


Sent from my iPhone using Tapatalk

Cool, which competitions will you be attending, i just might have to show up

Next "Show" or competition this Baby is attending are Scandinavian Custom motor Show 2-4 May in Fredericia Denmark.

Goal is to grab the *BEST US I.C.E* 1.st place

i'll see if i can make it

Nice chevy!!... I have one to, but its a vert.. Mine has a 454 in it... Its a sick car for sure.. The front bumper comes up to your chest.. Its a fla car... They call them DONKS!.. 28" dubs/lambo doors/6 w7 12's and the inside is all fiberglass with custom paint... Alligator and ostrich interior.. There isn't much more you can do to it.. It even has fiberglass wheel wells..

JK wrote:Nice chevy!!... I have one to, but its a vert.. Mine has a 454 in it... Its a sick car for sure.. The front bumper comes up to your chest.. Its a fla car... They call them DONKS!.. 28" dubs/lambo doors/6 w7 12's and the inside is all fiberglass with custom paint... Alligator and ostrich interior.. There isn't much more you can do to it.. It even has fiberglass wheel wells..

Nice... POST Some pictures bro..

I got some new work done in my engine compartment.. Airbrushed Blower housing.. ( bourght the AC delete cover ) .. and did some custom paint..

But hey.. let´s see the vette!!

sorry!! its a VERT... a convertible impala... im going to have someone post for me.. i have several chevys..... i dont take many picts.. i do have one that 2 of my sons are sitting in in the picture..

Donk

Blank