Corty75 ´s New Ti Build, Ford Mondeo Daily driver ( SOLD )

Have a cool car stereo? Post your install pictures here! No PG? No problem! Competition grade or sub-in-box setups: ALL are welcome!
Post Reply
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Corty75 ´s New Ti Build, Ford Mondeo Daily driver ( SOLD )

Post by Corty75 »

Well.. This is my daily driver!
Had some gear on the shelf, 8) so took me about 2 days to build this.


1 X 1200.1Ti
1 X 600.4 Ti <---- Couldent wait for the 500.4Ti from Drock :roll: ( On the way to me in DK ).. so picked up this one for 150$ NIB locally
2 X 12" TiD4 Subs.
4 X 5,25" Fosgate power combo´s ( one each door )
Some old school accessories from " the past "..
PG 12g speaker cable all over.
Pg Arx 300 Rca´s X 3

Purple zeropoint possitive 4g cable are from meber Bfowler! Thank you. :wink:

All Cables are wrapped in flex! ( Do not wanna cath any more fire´s ) :D

This is my daily driver, and i am telling you guy´s, :drool: this setup is NOT something the wife is happy about! :D ( So im keeping it! ) :metal:

Update: 8/3-2016
The ol´ Ford was fallin´apart.. so i took the stereo out, sold the car and bought myself a BMW E38 7-Serie.
Time for new project.
Attachments
IMG_1104.JPG
IMG_1100.JPG
IMG_1098.JPG
IMG_1101.JPG
Last edited by Corty75 on Tue Mar 08, 2016 1:18 pm, edited 1 time in total.
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by dvnt88 »

Nice work and gear sir :clap: ...always have and always will be a "TI WHORE" as that line is what got me into the "PG" world :twisted: . I have an install coming up around September (New car for me ... :twisted: ) and will consist of the following:

Audiocontrol DQ-61 (OEM interface as I'll be keeping the factory deck)

TI 500.4 (Mids and highs)
2 x Image Dynamics XS65 comps

TI 400.2 (Image tweets in the A-pillars)
1 x Image Dynamics XS28 tweets

TI 800.1 (will run her at 2ohm)
Image Dynamics IDMAX 12D4v3 in a 2.25ft^3 ported box

PG DD5
PG TI BassCUBE
PG TI pwr / gnd blocks
Kinetik 1800.
:shock: 8) :shock:

Will definitely post pics of the install once I get it going.
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
vwdude
Posts: 1846
Joined: Sun Mar 31, 2013 11:55 am
Location: So cal

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by vwdude »

Very nice install. Not a fosgate fan but you can be excused with the use of ti amps.
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Corty75 »

vwdude wrote:Very nice install. Not a fosgate fan but you can be excused with the use of ti amps.

Haahaaaaa... The fosgate´s are fair enough!
Thanks.

Plan is to swap the Fosgate´s into 5:25 Elite combo! Havent got the fonds yet, but working on it.. it is a daily driver though :wink:
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
mndevil
Posts: 64
Joined: Fri Oct 12, 2012 9:48 pm

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by mndevil »

Nice Install Man!!
1 MPS2220; 1 MPS2240; 1 MAC200; 3 MS275; 1 MQ430; 3 MPS2500; 3 MS2125; 1 MS1000TA
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Corty75 »

mndevil wrote:Nice Install Man!!

Thanks..
I did mke mistake though... The 4g cable is way to small, im burning agu fuses ad 100AMP to the 1200.1Ti.

Gotta upgrade to 0g wire! and some extra battery power.
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
mndevil
Posts: 64
Joined: Fri Oct 12, 2012 9:48 pm

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by mndevil »

Corty75 wrote:
mndevil wrote:Nice Install Man!!

Thanks..
I did mke mistake though... The 4g cable is way to small, im burning agu fuses ad 100AMP to the 1200.1Ti.

Gotta upgrade to 0g wire! and some extra battery power.

yup, you need to upgrade your cable. Luckily you live in Europe, 0 AWG is easy to come by. Had to wait for mine 3 weeks to get it
1 MPS2220; 1 MPS2240; 1 MAC200; 3 MS275; 1 MQ430; 3 MPS2500; 3 MS2125; 1 MS1000TA
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by dvnt88 »

Definitely upgrade to the 1/0g wire to the pwr block, then run 4g to the amps. Ran a 500.4 and 1200.1 running 1/0g to the block and 4g to the amps and never had a problem blowing fuses, just make sure you don't have any exposed metal-to-metal contact from the block to any metal part in the car or it'll cause a nice short and pretty sparks.
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Corty75 »

Yep ... 100 Amps multipli 14,4 volt= 1440watts!!
I believe this AMP need 150 Amps fuses.
And 4g cable is capable up to 125 ad 20ft.

Forgot to calculate when i installed it..

Btw: 0g cable, where do you guys buy this? Any good suggestions ?

Sure would like some PG, but seems to be rare now :/
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
User avatar
Bfowler
Briaans..... BRIAAAAANNNNNNS
Posts: 10764
Joined: Wed Dec 06, 2006 11:06 am
Location: So easy, a cavewomen could do him

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Bfowler »

looks good! sorry the cable didnt work. maybe just run another 4awg alongside the purple. 1 for each amp?
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by dvnt88 »

Corty75 wrote:Yep ... 100 Amps multipli 14,4 volt= 1440watts!!
I believe this AMP need 150 Amps fuses.
And 4g cable is capable up to 125 ad 20ft.

Forgot to calculate when i installed it..

Btw: 0g cable, where do you guys buy this? Any good suggestions ?

Sure would like some PG, but seems to be rare now :/
Hey bud, the manual states a 120 amp fuse for the TI1200.1 if you'll be running it at less than a 4ohm load 8) , so the 4g should work out ok (if less than a 20ft run) :naughty: , but always nice to have a little wiggle room. :twisted: :lol:
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
mndevil
Posts: 64
Joined: Fri Oct 12, 2012 9:48 pm

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by mndevil »

I guess you could take a look at Shok Industries Competition series, those series are pure copper. Or FLUX also good
1 MPS2220; 1 MPS2240; 1 MAC200; 3 MS275; 1 MQ430; 3 MPS2500; 3 MS2125; 1 MS1000TA
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Corty75 »

Nice to know fellas...

Bfowler: No worry´s, the 4g wire is AWESOME, i bought it because my Ti Build should have been with a 1600.5Ti.
But you know, as allways.. I wanted MORE!! :twisted:

Bought a 8farad capacitor from Audiobahn today, and some Good ol´0g OFC wire! :hurr:
Also got a yellowtop ( optima ) :metal: .. might throw that in the trunk

This daily driver might become a serious build now.. this was not in my mind from the beginning!

Well... Thats the side effect of the " shot of ICE in the vane " :bong:
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Corty75 »

UPDATE

Got the 500.4Ti last night..

My daily driver Ti Build is Completed!

Thanks

600.4Ti now on retirement :D
Attachments
IMG_1181.JPG
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by dvnt88 »

That is one sexxy pic brother ... :twisted:
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Corty75 »

dvnt88 wrote:That is one sexxy pic brother ... :twisted:
:thumbs:
HeHe... It´s sure is!! :wink:

Kind a caught me inthis project though.. Next is to build some fiberglass and some plexiglass with a " little" LED backlight..

"Hide away" the cables most likely ..

Titanium logo in plexiglass with blue LED backlight.. think it could be awesome?
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
Wigzter
Posts: 56
Joined: Fri Mar 28, 2014 1:25 pm
Location: Tampa, FL

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Wigzter »

This is really nice bro!! Those Ti2 subs have to fill the cabin real nice because you don't a trunk to go through like I do. Sometimes I ride around with the back seats folded down though.

Great install man!!

Oh and my buddy found a pair of Kenwood 6.5s at Best Buy for $30 for stock systems at 30watts rms. Which fits my factory receiver perfectly. Going to get a couple pair here soon and I'll let you know how they sound.
06 Chevrolet Tahoe
Bose Factory System w/ PAC Line Out Converter
(2) Bose Tweeters
(2) 4" Bose Midranges
(4) 6.5" Bose 4peakers
(1) Ti21300.1 Amplifier on Stinger 4ga Power/Ground
(2) Ti212D4 Subwoofers wired to 1ohm load
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Corty75 »

Wigzter wrote:This is really nice bro!! Those Ti2 subs have to fill the cabin real nice because you don't a trunk to go through like I do. Sometimes I ride around with the back seats folded down though.

Great install man!!

Oh and my buddy found a pair of Kenwood 6.5s at Best Buy for $30 for stock systems at 30watts rms. Which fits my factory receiver perfectly. Going to get a couple pair here soon and I'll let you know how they sound.

Cool, are they coax or combo´s ?

Thanks for the comment though.. u might wanna check out my Chevy.. it won 1.st place in I.C.E ad Scandinavian Custom show!
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
Droid2Global
Posts: 9
Joined: Sat Jul 19, 2014 11:50 pm

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Droid2Global »

Hello please tell me the size of your box. I have two ti212d2.
User avatar
Corty75
Posts: 272
Joined: Tue Jan 22, 2013 12:18 pm
Location: Denmark

Re: Corty75 ´s New Ti Build, in a Ford Mondeo Daily driver

Post by Corty75 »

Droid2Global wrote:Hello please tell me the size of your box. I have two ti212d2.
Measurement in Centimeter.

110 L x 35 H x 25 D

Port is 4 inch
6 inch long

Peaks in 43 hz
6 Trophy´s in 2014 : 8 Trophy´s in 2015: :
EMMA AWARDED in 2014 and 2015


Frank Route´n Stein #0452 with Frank´d Distro ANL and Negative blocks
FAS #64
SOFA #64
Outlaw #1655
Titanium series MKI:
1200.1
1000.2 x 3
600.2 x 2
500.4 Ti
12" TiD4 subs x 2
Voltage display x 3
POWERED BY PHOENIX GOLD Display
15 Powercore Alumapro
Base cube
Distro 1in 2 out ANL
Distro 1 in 4 out NL[/size]
Post Reply