More Granite speakers
More Granite speakers
I need a good 3-4 inch speaker to through into a couple granite cubes I'm making to match my sub. Any ideas for a drop in that'll sound decent in a completely dead enclosure?
Those tender little burgers with them little, itty-bitty grilled onions that just explode in ya mouth like flavor crystals every time you bite into one.. just makes me want to burn this muthafuka down.... Come on, Pookie, let's burn this muthafuka down!!!
They're for my theater so 8ohm. I figured that I really didn't need to have too much more than whats in there now. I also wanted to try-n keep them looking like the BOSE cubes.
I'm gonna make and sell a 5.1 GRANITE speaker set.......Anybody interested..................? The sub enclosure has currently cost me about $125.
I'm gonna make and sell a 5.1 GRANITE speaker set.......Anybody interested..................? The sub enclosure has currently cost me about $125.
Those tender little burgers with them little, itty-bitty grilled onions that just explode in ya mouth like flavor crystals every time you bite into one.. just makes me want to burn this muthafuka down.... Come on, Pookie, let's burn this muthafuka down!!!
Tang Band makes the best budget 3-4" full-range speakers that I know of.
Parts Express has a lot of them. Some examples:
http://www.partsexpress.com/pe/showdetl ... er=264-821
http://www.partsexpress.com/pe/showdetl ... er=264-846
http://www.partsexpress.com/pe/showdetl ... er=264-848
Check the bottom of the page for a PDF spec, which includes a frequency response graph. Ideally you want to be as flat as possible from 100-20kHz.
Parts Express has a lot of them. Some examples:
http://www.partsexpress.com/pe/showdetl ... er=264-821
http://www.partsexpress.com/pe/showdetl ... er=264-846
http://www.partsexpress.com/pe/showdetl ... er=264-848
Check the bottom of the page for a PDF spec, which includes a frequency response graph. Ideally you want to be as flat as possible from 100-20kHz.
Here's the complete set. I personally really liked the Bamboo cone drivers, because they were less shrill than the more expensive titaniums. No reviews on the coaxials yet, but they look nice and flat. They should have better off-axis treble performance as well. I think I agree with Brandon; the coax is probably your best bet.
get a pair of pioneer wizzer cone 4" drivers, they are full range.
burn them in, play music for several hour with speaker sitting free air.
toss them in the oven or direct sun (you live in P-town so oven) after burn in, let the surface temp come up to 110-115F then immediately toss in freezer, buy two sets as the magnets may freak out and crack.
A friend of mine swears by this process with these drivers, several others do as well.
burn them in, play music for several hour with speaker sitting free air.
toss them in the oven or direct sun (you live in P-town so oven) after burn in, let the surface temp come up to 110-115F then immediately toss in freezer, buy two sets as the magnets may freak out and crack.
A friend of mine swears by this process with these drivers, several others do as well.
I think we've established that "Ka Ka" and "Tukki Tukki" don't work.
http://www.google.com/products?q=pionee ... ts&show=ddFuzzyHoNutz wrote:
How much are they?
I think we've established that "Ka Ka" and "Tukki Tukki" don't work.
ZP4's
Keith may be sold out. He is out of the country-email would be best.
Enjoying great sight and sound does not have to consume your life savings!
www.dc-connections.com
www.dc-connections.com
