Phoenix Gold Phorum
http://www.phoenixphorum.com/

It is done! 70 Dodge Charger
http://www.phoenixphorum.com/viewtopic.php?f=13&t=15127
Page 4 of 4

Author:  ttocs [ Sat Nov 03, 2012 1:49 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

so have you got to open it up yet joerg?

Author:  joerg [ Sun Nov 04, 2012 3:21 am ]
Post subject:  Re: It is done! 70 Dodge Charger

ttocs wrote:
so have you got to open it up yet joerg?


Unfortunally we had temperatures below freezing already and they used salt on the roads over here. I´ll finish replacing my master brake cylinder tomorrow and than the car will be trailerd into it´s winter garage. Testing it will have to wait until April next year. :?

Author:  joerg [ Sun Feb 24, 2013 1:21 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

Since i came home thursday and everything back home got over my head because not a single pre organized worked out well i needed to vent a little and had a shitload of fun taking the Charger out onto the road for a cruise around the block. :mrgreen:


Image
Image
Image
Image
Image
Image
Image

Author:  ttocs [ Sun Feb 24, 2013 1:52 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

Look good man I have been wanting to get a good winter shot/vid clip of mine in the cold with the steam commin up from the side exhaust.

Author:  joerg [ Fri May 31, 2013 3:45 am ]
Post subject:  Re: It is done! 70 Dodge Charger

Some news from my side of the pond. After beeing pissed about the hairline crack and the gasoline fire in my engine bay i started to work on my car again today. I upgraded the lights to all H4 and also did the headlight harness upgrade. The new coolant overflow tank it´s doing it´s job as well now.
Image
Image

Removed the non original gauges and replaced them with a nice 66-70 B-body Console Vacuum Gauge.
Image
Image

Little video from testing it:

Author:  joerg [ Mon Jul 01, 2013 1:12 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

Finally some progress here again. I got all the parts together for my ignition upgrade 8)

Image

The car is at my friends bodyshop now and he started to work on the air grabber hood 8)
Image
Image
Image
Image

I see light at the end of the tunnel already and hope that i´ll be able to start driving the car by end of july.

Author:  ttocs [ Mon Jul 01, 2013 5:03 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

is the hood scoop going to actuate up/down with the throttle?

Did you get those cut outs? If/when you do let me know as I have a guy making up a nice little circuit that will open them up automatically for 10 secs with a WOT switch.

Author:  LowandLoud [ Tue Jul 02, 2013 2:15 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

So you are adding an Air Grabber scoop out of a same year Roadrunner/GTX? Interesting. I can honestly say i have never seen that mod before. Cool idea.

I believe they were controlled via a cable run to the dash? Or maybe connected to the throttle linkage.

Will you be adding the "shark teeth" graphics to the sides?

LL

Author:  joerg [ Tue Jul 02, 2013 10:07 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

ttocs wrote:
is the hood scoop going to actuate up/down with the throttle?

Did you get those cut outs? If/when you do let me know as I have a guy making up a nice little circuit that will open them up automatically for 10 secs with a WOT switch.


The cutouts are on their way. But i´m not going to have them open up when i go on full throttle. I´ll have them open up with the switch they come with. If they would open everytime i take of at a traffic light people around my town would get pissed pretty soon i guess :lol:


LowandLoud wrote:
So you are adding an Air Grabber scoop out of a same year Roadrunner/GTX? Interesting. I can honestly say i have never seen that mod before. Cool idea.

I believe they were controlled via a cable run to the dash? Or maybe connected to the throttle linkage.

Will you be adding the "shark teeth" graphics to the sides?

LL



I know of 2 cars that had the mod done but they took the whole outer skin of the roadrunner hood and that made them loose the overall Charger hood appearence. I wanted to keep the turn signal indicators and the edges running along the hood.

Usally the air grabber from Plymouth was actuated via a vacuum switch mounted in the dash. These parts are very expensive.

Since i want to keep it simple and stupid i´m going to open and close mine with a cable or maybe with a 12V spindle motor. I´m not a friend of vacuum actuated gimmicks.

The 71 and 72 Chargers where equipped with the rare ramcharger option. The decal on these looked a little different.

Image

Author:  ttocs [ Tue Jul 02, 2013 10:17 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

The guy that made my cut-out circuit could make a controller for that hood scoop as well.

Author:  joerg [ Mon Aug 05, 2013 8:31 am ]
Post subject:  Re: It is done! 70 Dodge Charger

I took my top lid off the intake yesterday to service my carbs and change the main jets of the center one. The factory ones that were in there have been too small. Today i got a call from my body shop guy that they also continued to work on my hood. Took some pictures of it. Will pick it up thursday and take it to the paintshop. :beer:

Image
Image
Image

Author:  ttocs [ Mon Aug 05, 2013 12:21 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

nice!

Author:  zztunnell [ Fri Aug 09, 2013 3:43 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

Looks killer I like how far out the beveled side pieces are,makes it look fat and mean!

Author:  ttocs [ Fri Aug 09, 2013 5:09 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

Got a couple more things for ya. let me know when its time to ship them.

Author:  joerg [ Sat Aug 10, 2013 3:28 am ]
Post subject:  Re: It is done! 70 Dodge Charger

ttocs wrote:
Got a couple more things for ya. let me know when its time to ship them.


It should be seven items in total. The last one to come in which is not on the PM list i sent you is a vacuum actuator:

http://www.ebay.com/itm/380691771603?ss ... _103wt_962

If u have all seven items it would be great if u could ship them.

Author:  joerg [ Sat Aug 10, 2013 12:13 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

Finally the car is running smooth again. I have the oportunity to switch between 2 ignition sytems now only using minor tools and an hour of my time.
Started the car with the old ignition system today to make sure everything is working as it should and will switch over to the programmable MSD setup tomorrow. :hi 5:

Image

And here´s a picture of theunderside of the modded hood.

Image

Author:  joerg [ Sat Aug 24, 2013 1:15 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

The hood is almost done and just the end towards the windshield is undergoing some minor changes. I don´t like how it´s just cut off.

Image
Image

On top of that i won the auction for a mechanical six pack setup today. I´m so excited about these, because they are discontinued since 1971 and very hard to find. The benfefit of these is that the two outboard carbs have acceleration pumps as well and are actuated at the same as the center one is once i hit the accel pedal. 8)

Image
Image
Image

Author:  ttocs [ Sat Aug 24, 2013 2:55 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

hood looks killer man.

Author:  joerg [ Sun Jan 12, 2014 3:39 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

Since the hood and everything had to be reworked and the guy doing this job for me didn´t care too much about appearance and floating lines anymore i stopped the project above and will go back to the old intake i had. I´ll start over with it when money allows me to buy my own welder and i can do the hood on my own.

Never the less i finally took me some time this weekend and rebuilt the carbs ttocs got for me off ebay last year. All new gaskets, all new jets all new power valves and loads off hours cleaning went into them.

Attachment:
DSC03463.1.JPG
DSC03463.1.JPG [ 156.52 KiB | Viewed 5049 times ]

Attachment:
DSC03460.1.JPG
DSC03460.1.JPG [ 176.48 KiB | Viewed 5049 times ]

Attachment:
DSC03461.1.JPG
DSC03461.1.JPG [ 141.54 KiB | Viewed 5049 times ]


Once it gets warmer outside i´ll bring the Charger over to the new house and swap intakes and will just enjoy driving it for the upcoming season.

Author:  ttocs [ Sun Jan 12, 2014 4:11 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

You don't know how close I was to trying to mount those carbs on my car :) Just looks like such a cool mechanical piece...

Author:  joerg [ Tue Jan 21, 2014 2:45 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

ttocs wrote:
You don't know how close I was to trying to mount those carbs on my car :) Just looks like such a cool mechanical piece...


That would have drowned your engine :lol:

Today i finally received those stupid metal split ups for my fuel lines. I had to order them online because not a single shop in arround my town had them available. :doh:
I hope that winter doesn´t kick in anymore since we stayed snow free this year. That would allow me to start into the season early and i can mount everything next month.

Attachment:
DSC03466.1.JPG
DSC03466.1.JPG [ 207.56 KiB | Viewed 5029 times ]

Author:  ttocs [ Tue Jan 21, 2014 2:55 pm ]
Post subject:  Re: It is done! 70 Dodge Charger

did you get my pm that I got your other 2 packages?

Author:  joerg [ Wed Jan 22, 2014 10:39 am ]
Post subject:  Re: It is done! 70 Dodge Charger

ttocs wrote:
did you get my pm that I got your other 2 packages?


Nope. Never received a message from you.

Page 4 of 4 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/