Sneak Peek

Mackenzie · Post by **Mackenzie** » Sat Jan 02, 2010 11:45 pm

Not a bad looking sub for entry level... Just curious morgan, if any 8s will be availale in any of the new lines?

Dirtyred · Post by **Dirtyred** » Sun Jan 03, 2010 4:40 am

Somebody say 8's again? I'll take 4 please.

MW3 · Post by **MW3** » Sun Jan 03, 2010 10:01 am

There are three levels of woofers:

R1 - 200w RMS/400w PEAK. 20mm peak to peak excursion.
R2 - 400w RMS/800w PEAK. 30mm peak to peak excursion.
Ti - 600w RMS/1200w PEAK. 40mm peak to peak excursion.

Motor structures get larger of course as you move up in the line. The cosmetics and box sizes are similar between the three woofers.

First phase is 10 and 12s. Keep in mind, we are launching 30+ new models of PG products at CES, so we can't come out of the gate with everything. We are looking at 8's and 15's and some other "special" woofers in the second phase of product.

oldschoolfan · Post by **oldschoolfan** » Sun Jan 03, 2010 10:33 am

Morgan, any of these woofers made in the states? Just curious.

Juice0723 · Post by **Juice0723** » Sun Jan 03, 2010 12:03 pm

I want the Ti line if its better then the rsdc, if not I'll just get two more 10" rsdc's. Wondering about the price on the Ti line though. Should be nice.

MW3 · Post by **MW3** » Sun Jan 03, 2010 3:26 pm

Ti and RSDc use similiar motors. Ti has a bit more excursion though.

All woofers are made in china.

Irongoats · Post by **Irongoats** » Sun Jan 03, 2010 4:59 pm

MW3 wrote:Ti and RSDc use similiar motors. Ti has a bit more excursion though.

All woofers are made in china.

Man, I was hoping for some American made products.

MW3 · Post by **MW3** » Sun Jan 03, 2010 8:01 pm

Irongoats wrote:
MW3 wrote:Ti and RSDc use similiar motors. Ti has a bit more excursion though.

All woofers are made in china.
Man, I was hoping for some American made products.

We haven't ruled that out for some upper end products.

NewOldStock · Post by **NewOldStock** » Sun Jan 03, 2010 9:36 pm

MW3 wrote:We haven't ruled that out for some upper end products.

IMO - I would prefer everything be made in the states, like the M/MS of old... but barring that, even just having the LE amps specifically hand-made in America would be freaking sweet.

Now that I have the wife's understanding that buying LE PG amps is going to be in our future and we will need to budget for them... let the collecting begin!

Having them made here in the states would just make it all come full circle.

Post by **Bfowler** » Sun Jan 03, 2010 11:07 pm

personally...im ok with not paying 2x as much for the new gear just to have a american flag silk screened on it...

Post by **Rold Gold** » Sun Jan 03, 2010 11:26 pm

werd.....................^

twisted · Post by **twisted** » Mon Jan 04, 2010 7:13 pm

damn........ive been sleepin WAAAAYYY toooo long
those Ti amps are farkin sexy!!!

itchnertamatoa · Post by **itchnertamatoa** » Mon Jan 04, 2010 9:35 pm

here's the helicopter again
beware fellas

where u been Keith?

Pillow · Post by **Pillow** » Tue Jan 05, 2010 1:54 pm

All woofers are made in china.

Common get creative! Bring back some of the Adire Audio products since they went under and brand them as PG. The XBL^2 technology is where it is at. Great Xmax and SQ. Actually A LOT of great speakers are made for home theater use that barely get mentioned on car audio forums, but will kick the crap out of the car audio stuff.

Be creative. Keep stealing from Morel if need be! LOL Better yet call up AVI and take their mids and tweets.

Just some ideas to help Morgan. This is a pretty tough crowd

twisted · Post by **twisted** » Tue Jan 05, 2010 2:53 pm

itchnertamatoa wrote:here's the helicopter again
beware fellas

where u been Keith?

LOL
goin crazy............been so busy i havnt been online much at all!!!

how you been

Post by **VW337** » Tue Jan 05, 2010 7:40 pm

MW3 wrote:Ti and RSDc use similiar motors. Ti has a bit more excursion though.

All woofers are made in china.

More excursion?

So are you sacrificing SQ? I would really like to see some TS specs maybe some mic'd outputs..........

KHPower · Post by **KHPower** » Wed Jan 20, 2010 2:07 pm

I was just thinking how cool it would be to have a Phoenix Gold battery line. not as complex as Kinetik or anything but like Stinger and Optima. Have a all black battery with The gold Phoenix symbol on it with Fusion nickel plated copper or brass top and side mount posts.

Post by **kg1961** » Fri Jan 22, 2010 9:41 am

Didn't Pg make a battery back in the day I remeber something about oil based not gel cel. This is many years ago I would say around 93-96...

Also MX3 were are more pics I know we got to see the price list but that it?

its been almost 2 weeks since new pics would be nice to see specs box size ect

Post by **kg1961** » Fri Jan 29, 2010 12:34 pm

Hello Anyone from Pg we have really not heard anything for a bit now?

I see on F/B new pics are coming

MW3 · Post by **MW3** » Fri Jan 29, 2010 10:26 pm

I apologize, we have been slammed since CES preparing for production.

We will have some news pics, etc shortly. I promise.

NewOldStock · Post by **NewOldStock** » Fri Jan 29, 2010 11:10 pm

MW3 wrote:I apologize, we have been slammed since CES preparing for production.

We will have some news pics, etc shortly. I promise.

Hey Morgan - any chance we can get pre-release gear? I mean, you all will get a bunch of gear when it ships out to dealers - any chance we can have a pre-release first shot at the new stuff?

I just bought some RSDc's but would archive them if I could get my hands on some pre-release Ti 10's or a new amp for the wife's car.

Post by **Rold Gold** » Fri Jan 29, 2010 11:21 pm

^^^^werd^^^^

Post by **ttocs** » Sat Jan 30, 2010 2:54 pm

did we ever get word on the demise of the wire/accesory division?

Post by **kg1961** » Sat Jan 30, 2010 3:18 pm

Im sure the new price list doesn't have any (wire/install ) as they want to move there stinger line. sad but what do you do

Tiger · Post by **Tiger** » Thu Feb 04, 2010 8:54 am

So uhm.. any pics of the Ti Subs?

Sneak Peek

item

item

item