We need Phoenix Gold images for the new website
Here's my RSd12d in a 2.0 cu ft ported box.
The box was originally a prefab dual 12 sealed enclosure (1.2 cu ft per chamber, 11/16" MDF) holding two Pioneer Champion Series subs (which were decent, but not great). I cut out the center divider to make it a window brace, covered the extra hole, added more bracing, lined the walls with 1" poly batting, then made trim pieces for the front baffle. I went with a 4" Precision Port and used BassBox 6 to come up with a tuning frequency of 32Hz.
Hooked up to a RF T3002 @ 2 Ohms bridged (700WRMS), gains set appropriately. Gets looow, loud, and sounds awesome!
The box was originally a prefab dual 12 sealed enclosure (1.2 cu ft per chamber, 11/16" MDF) holding two Pioneer Champion Series subs (which were decent, but not great). I cut out the center divider to make it a window brace, covered the extra hole, added more bracing, lined the walls with 1" poly batting, then made trim pieces for the front baffle. I went with a 4" Precision Port and used BassBox 6 to come up with a tuning frequency of 32Hz.
Hooked up to a RF T3002 @ 2 Ohms bridged (700WRMS), gains set appropriately. Gets looow, loud, and sounds awesome!
- Attachments
-
- RSd12dv1
- IMG_9258.jpg (196.26 KiB) Viewed 5300 times
-
- RSd12dv2
- IMG_9273.jpg (247.76 KiB) Viewed 5300 times
-
oldskoolmseriesfan
- Sherlock Homey
- Posts: 2517
- Joined: Sun Oct 19, 2008 10:03 pm
- Location: WEST SIIIIDE!!
They want PG only pics Pic's are supposed to be sent directly to Kevin Siegel @ AAMP. This is how you may be able to get them on the new website. posting your pic's here is useless and only clutters up the thread. PG only installs are what is required. RF crap will be left out. I mean really.....
screw car audio, I'd rather go fast....errr, wait a minute.
Hence why I left mine out. Xmax subs would been cool, if I had PG amps going back with it. Not my Alpines. BUT.. each to their own taste 
)
)-1998 Mazda 929 HC Series 1-
[b]Alpine[/b]- CDA-7998R/CHA-S634/
PXA-H700/MRV-1507 x 3/MRV-F407 x 3
[b]Phoenix Gold[/b]- Xmax 12 x 2/ZPM160 x 4
ZPM100 x 2/ZPT25 x 2/Bass CUBE/DD5
[b]Alpine[/b]- CDA-7998R/CHA-S634/
PXA-H700/MRV-1507 x 3/MRV-F407 x 3
[b]Phoenix Gold[/b]- Xmax 12 x 2/ZPM160 x 4
ZPM100 x 2/ZPT25 x 2/Bass CUBE/DD5
ya but that sub "LOOKS" cool, if you could just get a pic of it that be nice...i think...but ill be running a non pg amp also...so im just talking out my a$$....lol...
07 red dodge caliber DUB edition, 20" MSR 085 Chrome Rims, 245/35 R20 fusion tires, PHOENIX GOLD RSDC122 12" 1200w COMPETITION SUB, MB Quart DSC2150 Discus Series 2-Channel AMP 600W x 1 rms bridged at 4 Ohms, 4 GAUGE AMP INSTALLATION KIT
Could have borrowed all my Tantrums..Tiger wrote:Hence why I left mine out. Xmax subs would been cool, if I had PG amps going back with it. Not my Alpines. BUT.. each to their own taste
Damo - Australian member..
Speakers: 3 way front - morel elate9 (in custom doors), Peerless HDS Exlusive 4" midrange (in kicks), Scanspeak 1" illuminator (in custom a-pillars)
Subwoofers: 3x Phoenix Gold Ti2 10d2 (in wheel well enclosure)
PG Ti amps: 2x Ti600.4 (front stage) + Ti2500.1 (sub duties)
Speakers: 3 way front - morel elate9 (in custom doors), Peerless HDS Exlusive 4" midrange (in kicks), Scanspeak 1" illuminator (in custom a-pillars)
Subwoofers: 3x Phoenix Gold Ti2 10d2 (in wheel well enclosure)
PG Ti amps: 2x Ti600.4 (front stage) + Ti2500.1 (sub duties)
Here's one of mine and a few from CES/SEMA
- Attachments
-
- This one I did for a local TV broadcaster demo car circa 05
- PICT3574.png (974.41 KiB) Viewed 5169 times
-
- CES 05
- DSCN3931.JPG (183.26 KiB) Viewed 5169 times
-
- CES 07
- DSCN5021.JPG (197.46 KiB) Viewed 5169 times
-
- SEMA 05
- DSCN4535.JPG (723.22 KiB) Viewed 5169 times
-
- SEMA 05
- DSCN4546.JPG (695.78 KiB) Viewed 5169 times
I think we've established that "Ka Ka" and "Tukki Tukki" don't work.