Phoenix Gold Parts
-
- Posts: 38
- Joined: Wed Dec 23, 2009 9:28 am
- Location: Tampa Bay
- Contact:
Phoenix Gold Parts
Attn: Phoenix Gold Members; We have a lot of old housings from many different series in stock. Some models complete and some not so complete. If anybody wants to make there old beat up PG amp look new again we will be selling this stuff off. I don't have pricing yet and some of the stuff in the picture won't be for sale. If you need anything please contact me and we can work it out on a case by case scenario depending upon what you are interested in.
Please contact me:
Kevin Siegel
VP of Marketing
[email protected]
Please contact me:
Kevin Siegel
VP of Marketing
[email protected]
- Attachments
-
- Phoenix Gold housings.jpg (139.47 KiB) Viewed 12723 times
-
- Phoenix Gold housings.jpg (139.47 KiB) Viewed 12723 times
lovin the route66 covers, very unique both cosmetically and mechanically
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
-
- Itchy Tomato
- Posts: 2299
- Joined: Sat Dec 23, 2006 1:15 am
- Location: TAHITI
- Contact:
Re: item
Probably TiAL like mine, but almost looks a bit lighter (may just be the light in the room and the angle of the picture)kg1961 wrote:what is the silver one top right hand side
look like a ti style offroad cover or differnt reactor style
those rt66 covers will not fit any production rt66, i'm just trying to get my head round what is going on with them, all the connections are very differant to a regular rt66, i even think the cover is wider like same as outlaw
look where the m25 is supposed to go now to my eyes it looks like an m50 would fit there! and the m44 side is back to fron too!
looks like they were special order for some sick project that never happened, the more i look at them the more i want one for a project!!
look where the m25 is supposed to go now to my eyes it looks like an m50 would fit there! and the m44 side is back to fron too!
looks like they were special order for some sick project that never happened, the more i look at them the more i want one for a project!!
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
nope, i sussed it out, i know what it was made for now and there's no way it'll ever fit a regular rt66!!joerg wrote:Maybe they tried to fit a M100 and a M50 in there! That would have been a better choice than the M44 and M25 for sure!
have a guess
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
- mhyde71
- Dr. Jekyll
- Posts: 6231
- Joined: Sun Jan 20, 2008 8:34 pm
- Location: PG FanBoy in Green Mtn Vermont
- Contact:
but no good with out bases?? unless they're there and not able to be seen???
fabbin one be lil pricey for a one-sie two-sie project...
BUT now i see what you mean? it certainly looks (w/o studying it any further) like just what you mentioned...
100 and 44...?
just wish i/we could see the whole face of it... i am speculating that there is another hole over there for more out or inputs, or not...?
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
https://www.facebook.com/KhameleonKoatings/photos_albums
BINGO! yes 3 xm50's will fit it, most likely need an outlaw chassis/heatsink to make it happen as he outlaw is 3" wider than the rt66..kg1961 wrote:to me it looks like 3 m50 for the route cover look at the first one on the right
Last edited by marko on Fri May 14, 2010 10:27 am, edited 1 time in total.
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
- mhyde71
- Dr. Jekyll
- Posts: 6231
- Joined: Sun Jan 20, 2008 8:34 pm
- Location: PG FanBoy in Green Mtn Vermont
- Contact:
3x m50- you say?? huh??! interesting.. i would have gathered 100 and 44... but dont think it lines up exactly for that...
full frontal would be good. unless you guys are confident thats the deal/story?
Kev, could you measure that for us.
full frontal would be good. unless you guys are confident thats the deal/story?
Kev, could you measure that for us.
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
https://www.facebook.com/KhameleonKoatings/photos_albums
-
- Itchy Tomato
- Posts: 2299
- Joined: Sat Dec 23, 2006 1:15 am
- Location: TAHITI
- Contact:
- mhyde71
- Dr. Jekyll
- Posts: 6231
- Joined: Sun Jan 20, 2008 8:34 pm
- Location: PG FanBoy in Green Mtn Vermont
- Contact:
Re: item
if they are i need one for my 0.5 if they are 0.5's plexi's of course.kg1961 wrote:those also look like zpa plexi on the table for the guys that alway want oem ones
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
https://www.facebook.com/KhameleonKoatings/photos_albums
item
Ichti the list of what you don't have would be much shorter than the list of what you have!!itchnertamatoa wrote:I asked for one too
we'll see what comes out of it
I have 3 or 4 M50, same with outlaws, and an M100 so I could try it out
whenever I get the time to do so
got your item today glad you paid for it!its so nice I almost didn't want to let it go.
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport