The One and Ti line
The One and Ti line
I FINALLY have a PG dealer near me and went today to see some of the new lineup. The Ti comps are very very impressive sounding and the One (didn't hear it) is massive and looks to be built like a tank!!
The Ti amps are beautiful in person too! Great job Morgan and PG!!!
Can't wait to be able to buy the Elite sub and comps from them.......anyone know when they ship to dealers?
The Ti amps are beautiful in person too! Great job Morgan and PG!!!
Can't wait to be able to buy the Elite sub and comps from them.......anyone know when they ship to dealers?
Re: The One and Ti line
Supposed to be around mid April from what I'm hearing thru the grapevine for dealer stock on the new Elite line. Some dealers around here won't be stocking the goodies and will be a special order upon request due to the cost of the new line, but will still regularly carry the rest of the PG line..AVICJR wrote:I FINALLY have a PG dealer near me and went today to see some of the new lineup. The Ti comps are very very impressive sounding and the One (didn't hear it) is massive and looks to be built like a tank!!
The Ti amps are beautiful in person too! Great job Morgan and PG!!!
Can't wait to be able to buy the Elite sub and comps from them.......anyone know when they ship to dealers?
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies
"Old-Skool TI-Whore"
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies
"Old-Skool TI-Whore"
Re: The One and Ti line
Thank you Sir!!
-
- Posts: 151
- Joined: Wed Feb 22, 2012 10:10 am
Re: The One and Ti line
This is my first reply on here but I know my local PG dealer was saying the new elite is set to come out in april but he will only special order the new elite sub because there is not really a huge market for that gnarl of a woofer however I can't wait to get mine lucky my bday is april 12th just hope my Ti1500 will support it. Lol
Re: The One and Ti line
I think I read in a post that a ti1500.1 will run it.Bigred41291 wrote:This is my first reply on here but I know my local PG dealer was saying the new elite is set to come out in april but he will only special order the new elite sub because there is not really a huge market for that gnarl of a woofer however I can't wait to get mine lucky my bday is april 12th just hope my Ti1500 will support it. Lol
-
- Posts: 151
- Joined: Wed Feb 22, 2012 10:10 am
Re: The One and Ti line
Ya I think I read that post before I joined the phorum i have heard that the elite is supposed to put the W7 to shame curious if it will sound better/get louder than 2 12w6v2
-
- Posts: 151
- Joined: Wed Feb 22, 2012 10:10 am
Re: The One and Ti line
By the way.does anybody know enclosure specs for it yet?
Re: The One and Ti line
"Anything from 1200 to 1600 watts RMS works great on the Elite."Bigred41291 wrote: hope my Ti1500 will support it. Lol
Reply I got when I asked if my amp will suffice for the sub.
Re: The One and Ti line
The Elite.12d has a power handling of 1600w RMS-3200w PEAK. The ELite will be offered in a dual 4ohm voice coil set-up.
Rob Derry
Research & Development
AAMP of America/Stinger/Phoenix Gold
Research & Development
AAMP of America/Stinger/Phoenix Gold
-
- Posts: 151
- Joined: Wed Feb 22, 2012 10:10 am
Re: The One and Ti line
Any info on the recommended volume for a ported box
Re: The One and Ti line
I have not seen any specs yet I will see if I can get them and I will post when I get them. If Morgan doesn't beat me to it!
Rob Derry
Research & Development
AAMP of America/Stinger/Phoenix Gold
Research & Development
AAMP of America/Stinger/Phoenix Gold
-
- Posts: 151
- Joined: Wed Feb 22, 2012 10:10 am
Re: The One and Ti line
Ya I just want the rest of my cab space back 3.5cu ft box takes up the entire back of my truck and I'm hoping this will be a one sub solution that will hit as hard as my 2 w6s or harder while maintaining the clarity and responsiveness
Re: The One and Ti line
Welcome to the forum Rob! Thanks for the extra input.justrob wrote:I have not seen any specs yet I will see if I can get them and I will post when I get them. If Morgan doesn't beat me to it!
Re: The One and Ti line
OK here you go Elite 12 ported specs.
SPL
1.75 volume
2.5x12 (in.) port opening
34 (in.) lenght
tuned to 36hz
NORMAL
2.25 volume
2.5x12 (in.) port opening
31.5 (in.)lenght
tuned to 33hz
SQ
3.0 volume
2.5x12 (in.) port opening
28 (in.) lenght
tuned to 30hz
SPL
1.75 volume
2.5x12 (in.) port opening
34 (in.) lenght
tuned to 36hz
NORMAL
2.25 volume
2.5x12 (in.) port opening
31.5 (in.)lenght
tuned to 33hz
SQ
3.0 volume
2.5x12 (in.) port opening
28 (in.) lenght
tuned to 30hz
Rob Derry
Research & Development
AAMP of America/Stinger/Phoenix Gold
Research & Development
AAMP of America/Stinger/Phoenix Gold
Re: The One and Ti line
Sealed specs
SPL .75
Normal 1.2
SQ 1.6
SPL .75
Normal 1.2
SQ 1.6
Rob Derry
Research & Development
AAMP of America/Stinger/Phoenix Gold
Research & Development
AAMP of America/Stinger/Phoenix Gold
Re: The One and Ti line
Awesome!! Thanks again, curious though, are you a PG employee?
Re: The One and Ti line
Yes I am R&D for PG/AAMP. I got that info via Skype from Morgan.
Rob Derry
Research & Development
AAMP of America/Stinger/Phoenix Gold
Research & Development
AAMP of America/Stinger/Phoenix Gold
-
- Posts: 151
- Joined: Wed Feb 22, 2012 10:10 am
Re: The One and Ti line
Nice thanks man that helps alot really appreciate the info
Re: The One and Ti line
Bigred41291 wrote:Nice thanks man that helps alot really appreciate the info
x2, thanx again Rob.
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies
"Old-Skool TI-Whore"
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies
"Old-Skool TI-Whore"
Re: The One and Ti line
No problem guys. Let me know if I can help out on any other ?'s you may have.
Rob Derry
Research & Development
AAMP of America/Stinger/Phoenix Gold
Research & Development
AAMP of America/Stinger/Phoenix Gold
Re: The One and Ti line
Welcome to the Phorum guys!!!
Re: The One and Ti line
Rob - Another question for ya ...What's the mounting depth and mounting diameter of this badboy?justrob wrote:OK here you go Elite 12 ported specs.
SPL
1.75 volume
2.5x12 (in.) port opening
34 (in.) lenght
tuned to 36hz
NORMAL
2.25 volume
2.5x12 (in.) port opening
31.5 (in.)lenght
tuned to 33hz
SQ
3.0 volume
2.5x12 (in.) port opening
28 (in.) lenght
tuned to 30hz
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies
"Old-Skool TI-Whore"
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies
"Old-Skool TI-Whore"
Re: The One and Ti line
71/8 mounting depth
11 1/4 mounting diameter.
11 1/4 mounting diameter.
Rob Derry
Research & Development
AAMP of America/Stinger/Phoenix Gold
Research & Development
AAMP of America/Stinger/Phoenix Gold
Re: The One and Ti line
dats a big box........ Been a long time since I saw a recomendation that large.
what else can I say I am a grumpy asshole most of the time.
Re: The One and Ti line
Sweet ...thanx for the info.justrob wrote:71/8 mounting depth
11 1/4 mounting diameter.
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies
"Old-Skool TI-Whore"
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies
"Old-Skool TI-Whore"