bench test xenon 200.4
bench test xenon 200.4
has anyone done a bench test on Phoenix Gold Xenon 200.4 or the ZX450? I have both amplifiers but I have no idea where the sheets are on them and I'm trying to see which one will power 2 sets of 6.5" components better?
- Landcruiser
- Posts: 132
- Joined: Wed Jul 29, 2009 4:54 pm
Re: bench test xenon 200.4
This ad mentions a 921 watt rms birthsheet for a 200.4: http://www.ebay.com/itm/PHOENIX-GOLD-XE ... 7675.l2557
Some more info here also: http://www.caraudio.com/forums/amplifie ... heets.html
I cannot comment on the ZX450. Good luck.
Some more info here also: http://www.caraudio.com/forums/amplifie ... heets.html
I cannot comment on the ZX450. Good luck.
99 XJ
Re: bench test xenon 200.4
Mr. Wild nailed it. The ZX450v2 side of the PG Reactor benched 111w x 4 @ 4 ohms, 14.4 v.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
bench test xenon 200.4
The xenon will do full power no matter the impedance 1,2,4,8 I believe, so I would think the 200.4 would be a better choice at almost 200 verses the 111 watts from the zx. Sq wise they are probably pretty close.
Hook em both up and see what you like better. I'm curious now as well.
Sent from my iPhone using Tapatalk
Hook em both up and see what you like better. I'm curious now as well.
Sent from my iPhone using Tapatalk