MQ430
- NOT 2 OLD YET
- Posts: 400
- Joined: Mon Mar 17, 2014 4:13 pm
- Location: The Windy City
MQ430
I am running a MQ430 that has the 2 extra caps installed. I bought it like this and changed all the caps about a year ago. Some of you have seen this amp, its the one that Valeks hot rodded. Problem is the 2 extra caps look like they are bulging on the top. The other 4 look fine. This amp does not get run very hard at all. What can cause this and what is the best thing for me to do? Thanks guys!
Collection And Still Growing:
M-100, 50,2,44s, and 25
RT 66 #0840, Outlaw#1005, Bandit#1884, MQ430
MS2125, MS275, MS 2250 W/shroud 3MPS2500, 2 MPS2240 Custom MPS4740
EQ215, EQ215ix,EQ 230 W/TBAt, ZX600TI, 400TI, TI500.4
2 PLD1, MX2, 2 Leather Team PG Jackets
TBA (Dealer Display Empty Guts)10'XS Subs
AX204, 406 (New In Box)
Eclipse ECD413 + DSP1001 , 2 JL 8W6
Installed: PG MPS2500 and Modified By PG MQ430
ZBB34TI With ZRDT3, and RMD
Audison Bit 10
PG Elite and Sapphire 6.5 Comps
JL 13TW5 subs
M-100, 50,2,44s, and 25
RT 66 #0840, Outlaw#1005, Bandit#1884, MQ430
MS2125, MS275, MS 2250 W/shroud 3MPS2500, 2 MPS2240 Custom MPS4740
EQ215, EQ215ix,EQ 230 W/TBAt, ZX600TI, 400TI, TI500.4
2 PLD1, MX2, 2 Leather Team PG Jackets
TBA (Dealer Display Empty Guts)10'XS Subs
AX204, 406 (New In Box)
Eclipse ECD413 + DSP1001 , 2 JL 8W6
Installed: PG MPS2500 and Modified By PG MQ430
ZBB34TI With ZRDT3, and RMD
Audison Bit 10
PG Elite and Sapphire 6.5 Comps
JL 13TW5 subs
Re: MQ430
Can you throw up a picture? What are the specs on the capS?
A few of these and a few of those.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
Creator of www.phoenixgoldregistry.com
hit me up to add your limited edition amps.
- NOT 2 OLD YET
- Posts: 400
- Joined: Mon Mar 17, 2014 4:13 pm
- Location: The Windy City
Re: MQ430
Picture, dnt know how. Caps are Nichicon 5600uf same ones in all my amps.vwdude wrote:Can you throw up a picture? What are the specs on the capS?
Collection And Still Growing:
M-100, 50,2,44s, and 25
RT 66 #0840, Outlaw#1005, Bandit#1884, MQ430
MS2125, MS275, MS 2250 W/shroud 3MPS2500, 2 MPS2240 Custom MPS4740
EQ215, EQ215ix,EQ 230 W/TBAt, ZX600TI, 400TI, TI500.4
2 PLD1, MX2, 2 Leather Team PG Jackets
TBA (Dealer Display Empty Guts)10'XS Subs
AX204, 406 (New In Box)
Eclipse ECD413 + DSP1001 , 2 JL 8W6
Installed: PG MPS2500 and Modified By PG MQ430
ZBB34TI With ZRDT3, and RMD
Audison Bit 10
PG Elite and Sapphire 6.5 Comps
JL 13TW5 subs
M-100, 50,2,44s, and 25
RT 66 #0840, Outlaw#1005, Bandit#1884, MQ430
MS2125, MS275, MS 2250 W/shroud 3MPS2500, 2 MPS2240 Custom MPS4740
EQ215, EQ215ix,EQ 230 W/TBAt, ZX600TI, 400TI, TI500.4
2 PLD1, MX2, 2 Leather Team PG Jackets
TBA (Dealer Display Empty Guts)10'XS Subs
AX204, 406 (New In Box)
Eclipse ECD413 + DSP1001 , 2 JL 8W6
Installed: PG MPS2500 and Modified By PG MQ430
ZBB34TI With ZRDT3, and RMD
Audison Bit 10
PG Elite and Sapphire 6.5 Comps
JL 13TW5 subs
-
- Posts: 1653
- Joined: Sun May 06, 2012 8:01 am
Re: MQ430
If they are bulging from the top (or barely look like it) I would replace them...make sure you keep the voltage rating the same as they may be either the rail caps or B+ filtering caps, can't say unless a pic is posted.