Faulty amp and also cap replacements

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
dbjury
Posts: 86
Joined: Fri Jun 14, 2013 4:41 pm

Faulty amp and also cap replacements

Post by dbjury »

Hey all.

Ok so first I have a Ti600.2 zeropoint amplifier that is outputing terrible distorted sound. Im about to send away for repair, but thought Id ask if there is anything for me to try first. I've fiddled with the pots n switches to see if sound changes/cleansup but I have not cleaned anything as such. any tips?

secondly, I have 6 amps, 4 x zx's and 2 x Ti, and Im going to do the good boy thing and replace the caps.

Can ya confirm if I've got the right caps in mind?
http://www.digikey.com/product-detail/e ... -ND/589284

Thanks for any help.d
BMW 2006 530D E60
(yet to fit) Alpine 9887 CD/Ipod/Reciever: Boston Acoustics ZX6: Boston Acoustics SPG-555: Phoenix Gold ELITE .5
dbjury
Posts: 86
Joined: Fri Jun 14, 2013 4:41 pm

Re: Faulty amp and also cap replacements

Post by dbjury »

http://newzealand.rs-online.com/web/p/a ... /7083661P/

These seem all good, and are local supply. obviously the new caps are smaller, should I put larger ones in?
BMW 2006 530D E60
(yet to fit) Alpine 9887 CD/Ipod/Reciever: Boston Acoustics ZX6: Boston Acoustics SPG-555: Phoenix Gold ELITE .5
dbjury
Posts: 86
Joined: Fri Jun 14, 2013 4:41 pm

Re: Faulty amp and also cap replacements

Post by dbjury »

http://newzealand.rs-online.com/web/p/a ... s/7396800/

heres the bigger ones 5600uF, still only 25mm, factory ones were 35mm tall
BMW 2006 530D E60
(yet to fit) Alpine 9887 CD/Ipod/Reciever: Boston Acoustics ZX6: Boston Acoustics SPG-555: Phoenix Gold ELITE .5
zeropoint0.5
Posts: 593
Joined: Fri May 13, 2011 12:03 am

Re: Faulty amp and also cap replacements

Post by zeropoint0.5 »

dbjury wrote:Hey all.

Ok so first I have a Ti600.2 zeropoint amplifier that is outputing terrible distorted sound. Im about to send away for repair, but thought Id ask if there is anything for me to try first. I've fiddled with the pots n switches to see if sound changes/cleansup but I have not cleaned anything as such. any tips?

secondly, I have 6 amps, 4 x zx's and 2 x Ti, and Im going to do the good boy thing and replace the caps.

Can ya confirm if I've got the right caps in mind?
http://www.digikey.com/product-detail/e ... -ND/589284

Thanks for any help.d
these in the link are the ones Eric D uses, so probably you're best choice.......

I would order them by 50, or by 100 if this gives u free shipping........

but changing the ps caps will not solve the distortion problems you mentioned........

i'm quessing the other ones will work also fine, but it won't look so "impressive" on the board......

good luck !!!!!!!!!
Post Reply