[VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
Wigzter
Posts: 56
Joined: Fri Mar 28, 2014 1:25 pm
Location: Tampa, FL

[VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by Wigzter »

Just like the title says, I finally made a little video for you guys to check out my first self install in a first person view, kinda lol.

I'm still kinda breaking them in so they still have a ways to go I think before I turn it up anymore.

Check it out and enjoy! I'll do more videos later too when I do more upgrades.

My current setup in the sig.

https://www.youtube.com/watch?v=g6nl0jOpveA
06 Chevrolet Tahoe
Bose Factory System w/ PAC Line Out Converter
(2) Bose Tweeters
(2) 4" Bose Midranges
(4) 6.5" Bose 4peakers
(1) Ti21300.1 Amplifier on Stinger 4ga Power/Ground
(2) Ti212D4 Subwoofers wired to 1ohm load
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by dvnt88 »

Sounds good bud :clap: ...where do you have the mids and highs x-overed at ...just curious?
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
Wigzter
Posts: 56
Joined: Fri Mar 28, 2014 1:25 pm
Location: Tampa, FL

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by Wigzter »

Thanks! I appreciate it!

I don't, it's all stock up front. I just used a PAC Line Out Converter and a bass knob, tapped into the front left speaker and just ran RCA's to the back for the amp and subs.

It's Honda's "Premium" audio system, which consists of (2) tweeters and (4) 6.5" speakers...I have no crossovers for the speakers. Just whatever the receiver is running.

I was playing that at 28/40 Volume on the receiver and it taps out pretty much at 30-32 depending on the song before distorting. It actually sounds really good for a stock receiver and paper cone speakers. I might upgrade the factory speakers though if I go bigger with the subs. But for now, I think it's sounding great myself.
06 Chevrolet Tahoe
Bose Factory System w/ PAC Line Out Converter
(2) Bose Tweeters
(2) 4" Bose Midranges
(4) 6.5" Bose 4peakers
(1) Ti21300.1 Amplifier on Stinger 4ga Power/Ground
(2) Ti212D4 Subwoofers wired to 1ohm load
trickyricky
Posts: 1653
Joined: Sun May 06, 2012 8:01 am

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by trickyricky »

Sweet and awesome gear....wish I could say the same about the music lol.

Play some Lenny Williams or Beatles...something that won't offend my ears...lol.
Wigzter
Posts: 56
Joined: Fri Mar 28, 2014 1:25 pm
Location: Tampa, FL

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by Wigzter »

Hahaha funny story about that. I was on my way home from work and I decided to make a quick video. I listen to most of my music on Rhapsody on my iPhone 5. So when I got back I was like "Shit, how am I going to record this and listen to music at the same time?"

I had no CDs in my car except for one, Slim Thug, lol. It's a really really old CD and I just decided to use that one because it sounded decent and was one of the cleaner songs on his CD, but anyways it was hitting pretty good so I just used it.

Def was not my first choice in music either, more like a last resort.
06 Chevrolet Tahoe
Bose Factory System w/ PAC Line Out Converter
(2) Bose Tweeters
(2) 4" Bose Midranges
(4) 6.5" Bose 4peakers
(1) Ti21300.1 Amplifier on Stinger 4ga Power/Ground
(2) Ti212D4 Subwoofers wired to 1ohm load
Droid2Global
Posts: 9
Joined: Sat Jul 19, 2014 11:50 pm

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by Droid2Global »

Hi my American friends, I am from Russia! would like to ask you the size of the box under your two subwoofers, and what ohm subwoofer is connected and what result in your db? I have one and ti212d2 sd1300.1 can tell me what box to collect? interested sizes! I listen to American rap! thank you!
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by dvnt88 »

Droid2Global wrote:Hi my American friends, I am from Russia! would like to ask you the size of the box under your two subwoofers, and what ohm subwoofer is connected and what result in your db? I have one and ti212d2 sd1300.1 can tell me what box to collect? interested sizes! I listen to American rap! thank you!

Welcome to the phorum bud :clap: ...attached is the manual for the subs and will give you the info you need for box size / type. As far as wiring you have 2 choices with a single D2 sub ...it can be wired to either 4ohm or 1ohm ...I would go the 4ohm route as the subs are rated at 600wrms and 1200 peak ...I think I remember the sd1300.1 being rated at 650wrms at a 4ohm load.
Attachments
Ti210d2andTi12d2_Subwoofer_Manual.pdf
(731.62 KiB) Downloaded 211 times
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
Droid2Global
Posts: 9
Joined: Sat Jul 19, 2014 11:50 pm

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by Droid2Global »

thanks for the tip! I now have a box 28 liters closed. wiring 2ga, plugged into 4 ohms, but it's all wrong, I want good bass, will connect to the first offer do-ventilated box with 60 liters setting 35Hz? you have had experience with this speaker? Power Amplifier add AGM battery 125 ampere hours.
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by dvnt88 »

Droid2Global wrote:thanks for the tip! I now have a box 28 liters closed. wiring 2ga, plugged into 4 ohms, but it's all wrong, I want good bass, will connect to the first offer do-ventilated box with 60 liters setting 35Hz? you have had experience with this speaker? Power Amplifier add AGM battery 125 ampere hours.
Anytime bud ...I almost always run a sealed box as I listen to mostly metal and some rap / techno and want deep, tight, articulate bass :twisted: . Sealed boxes are more forgiving if the box specs are a little off, but a vented box has to be dead nutz on with very minimal gray area. Use at least 10-12g wire from the sub to the amp, wire the sub to a 4ohm load and make sure your settings on the amp are correct. Pretty easy to do, just need to take ur time and do it right, a little time spent setting it up properly makes all the difference in the sound quality ur shooting for.
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
Droid2Global
Posts: 9
Joined: Sat Jul 19, 2014 11:50 pm

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by Droid2Global »

I understand you very well. I thought that these subs you are more common than we do, and I thought prompt specifically what size and configuration to do a rap music
Droid2Global
Posts: 9
Joined: Sat Jul 19, 2014 11:50 pm

Re: [VIDEO] Breaking in the (2) Ti212D4's on a Ti21300.1 Amp

Post by Droid2Global »

hello! I assembled system, two subwoofers PG ti212d2, amplifier PG sd1300.1, switching 2 ohms, Box 100, liters bass reflex port 350sm2, the result of a terrible 128db !! with the inclusion of bass boost two notches 137 that the result is not so?
Post Reply