Does it have enough power to run on the sub channel?
1100w @ 1ohm
800w @ 2ohm
???w @ 8ohm
If not, I'll take brand/model suggestions for 2x12's iso in a 4th order bandpass
Elite .5 + Cyclone
Re: Elite .5 + Cyclone
the clone doesn't need a whole lot of power it should be fine
what else can I say I am a grumpy asshole most of the time.
Re: Elite .5 + Cyclone
Power yes but you need a 24db cover not 18
edit I never seen the 2 different xover my bad sorry
edit I never seen the 2 different xover my bad sorry
Last edited by kg1961 on Mon May 25, 2015 10:26 am, edited 1 time in total.
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Re: Elite .5 + Cyclone
Manual shows 18db slope minimum and I can eq out the upper range as well with the audio control dq-61
-
zeropoint0.5
- Posts: 593
- Joined: Fri May 13, 2011 12:03 am
Re: Elite .5 + Cyclone
http://www.phoenixgold.com/products/amp ... oductID=80
gentlemen, if you read good , it states that the sub channel is 24db/oct..........
it is the F/R crossover that is 18 db/oct..........
gentlemen, if you read good , it states that the sub channel is 24db/oct..........
it is the F/R crossover that is 18 db/oct..........
Re: Elite .5 + Cyclone
zeropoint0.5 wrote:http://www.phoenixgold.com/products/amp ... oductID=80
gentlemen, if you read good , it states that the sub channel is 24db/oct..........
it is the F/R crossover that is 18 db/oct..........
I never realized there are two different xover slopes. Great eyes!
I'll give it a shot... or rather I'll have my buddy build up the box!