Ok guys I decided today to stop at this outdoor flea market right. Well I came across this both and a mexican (no offense to anyone) was standing there selling a bunch of off name junk right. (ie 6" midbass 1000w) for like $40 bucks. Neway I saw a box with a bunch of old HU right and I saw a little silver corner sticking up. I went over to it and pulled it out and this is what it was. A PPI PC2200 chrome finish , I was like holy mother of god. "hey senior how much" I said, and then he thought and thought and said $5 bucks I said ok Ill take it and thought shit if it dont work it didnt cost me anything. So I get it home and clean it up a little and take the bottom plate off and I found 3 cracked mosfets (DAMN IT MAN IT) and 6 tiny brown resistors w the clear coating burnt off and a large ceramic resistor poped off the board jus one side of it though. So here are the pics of it. So guys is it fixable and is it worth the trouble and no there is no damage to the board itself. Please some feed back would be very greatly appreciated and yes sorry guys it not a PG Im not talking about but yall know everything.
Attachments
100_2079_162_small_139.jpg (46.19 KiB) Viewed 1789 times
100_2080_858_small_648.jpg (38.07 KiB) Viewed 1789 times
100_2081_870_small_705.jpg (74.44 KiB) Viewed 1789 times
100_2085_994_small_131.jpg (23.13 KiB) Viewed 1789 times
100_2086_136_small_357.jpg (25.04 KiB) Viewed 1789 times
Last edited by knightrider358 on Mon Jun 01, 2009 1:15 am, edited 1 time in total.
Sweet deal Knightrider. I bought a Critcal Mass UL 2500 mono amp that was broken much like your PPI, about four of the mosfet's where broken. I went ahead and replaced all the mosfet's 28 total and I have a few half watt resistor's that I haven't replaced yet because I can't tell what color the bands are. Even if you decide not to repair it yu can alway's put it up on ebay and get $40 to $60 for it.
1) There are typically settings on cameras to reduce the size of picture being taken
2) IF NOT ^^^ then there are picture resizer programs...
3) Most camera have a focus or macro (up close detail) type function- Does yours???
4) COuld you take better pic's? Are you trying to sell it??? ->
5) Yeah it's worth 5.00 anyways! Shoot you 20.00 for it, and I'll get it working. but wanna see better close ups and stuff
Last edited by mhyde71 on Mon Jun 01, 2009 8:21 am, edited 1 time in total.
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
thanx mrhyde I apprciate the tip as u can see I took ur advice and fixed it the pics that is also Ill basically probally give it to one of yall if I cant fix it and my soundstream ref300 if I can get it fixed. but for now im gonna try to fix it and use it in my next install. also I used the close up mode on my cam I cant figure out why they were blurry neways is there any type of mosfets I gotta use or are all they the same
I said ok Ill take it and thought shit if it dont work it didnt cost me anything. So I get it home and clean it up a little and take the bottom plate off and I found 3 cracked mosfets (DAMN IT MAN IT) and 6 tiny brown resistors w the clear coating burnt off and a large ceramic resistor poped off the board jus one side of it though. So here are the pics of it. So guys is it fixable and is it worth the trouble and no there is no damage to the board itself. Please some feed back would be very greatly appreciated and yes sorry guys it not a PG Im not talking about but yall know everything. 
