ZX450v2 or ZPA0.3v1?
ZX450v2 or ZPA0.3v1?
I'm going to re-do the install in the next few weeks. My 450 is just lying around, thought about putting it in the wifes car running Quarts up front and the XMAX 10" in back. Or I could use the ZPA0.3 for the XMAX 10" and possably bi-amp, w/the 450, the Dyns. Right now I use the 0.3 for the Dyns and I'm partial to the look of the 0.3 and 0.5 side by side, yet again the 450 would be more practical, sort of. The other thought is that the Dyns use a 6dB/12dB hi/lowpass per/oct xover that is "matched" spacific to the mid/tweet and the 450 is a 24dB/oct. Not to mention there's a limited amount of room behind the seat and the 450/0.5 combo would fit better. What the hell would you all do.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Some how Eric, I knew you'd say that. 
That's probably the way I'll go. I want the amps to match and that passive xover slope being "matched" to the comps.
That's probably the way I'll go. I want the amps to match and that passive xover slope being "matched" to the comps."ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998