Phoenix Gold Phorum

Hey all.

Ok so first I have a Ti600.2 zeropoint amplifier that is outputing terrible distorted sound. Im about to send away for repair, but thought Id ask if there is anything for me to try first. I've fiddled with the pots n switches to see if sound changes/cleansup but I have not cleaned anything as such. any tips?

secondly, I have 6 amps, 4 x zx's and 2 x Ti, and Im going to do the good boy thing and replace the caps.

Can ya confirm if I've got the right caps in mind?
http://www.digikey.com/product-detail/e ... -ND/589284

Thanks for any help.d

http://newzealand.rs-online.com/web/p/a ... /7083661P/

These seem all good, and are local supply. obviously the new caps are smaller, should I put larger ones in?

http://newzealand.rs-online.com/web/p/a ... s/7396800/

heres the bigger ones 5600uF, still only 25mm, factory ones were 35mm tall

dbjury wrote:Hey all.

Ok so first I have a Ti600.2 zeropoint amplifier that is outputing terrible distorted sound. Im about to send away for repair, but thought Id ask if there is anything for me to try first. I've fiddled with the pots n switches to see if sound changes/cleansup but I have not cleaned anything as such. any tips?

secondly, I have 6 amps, 4 x zx's and 2 x Ti, and Im going to do the good boy thing and replace the caps.

Can ya confirm if I've got the right caps in mind?
http://www.digikey.com/product-detail/e ... -ND/589284

Thanks for any help.d

these in the link are the ones Eric D uses, so probably you're best choice.......

I would order them by 50, or by 100 if this gives u free shipping........

but changing the ps caps will not solve the distortion problems you mentioned........

i'm quessing the other ones will work also fine, but it won't look so "impressive" on the board......

good luck !!!!!!!!!