Page 1 of 1
Ti2 800.1 PasMag Review
Posted: Tue Jul 02, 2013 6:59 pm
by MW3
http://www.pasmag.com/car-audio/reports ... -amplifier
Rated at 800w RMS x 1 at 1 ohm.
Measured power is 1230w RMS x 1 at 1 ohm.
I would say that is a conservative rating....
Re: Ti2 800.1 PasMag Review
Posted: Wed Jul 03, 2013 5:35 am
by Eric D
Can we get any photos of the internals?
Re: Ti2 800.1 PasMag Review
Posted: Wed Jul 03, 2013 7:01 am
by kg1961
man that is a small amp to be making those numbers.
Re: Ti2 800.1 PasMag Review
Posted: Sat Jul 20, 2013 9:23 pm
by Kirghiz
I saw the numbers on the 800.1 in the review, but what would the current draw of the 1300.1 be into a 2 ohm load? Surely the current draw of the 1300.1 would be less than that of the Elite.2 running 2 ohm bridged with a similar output. Based on the 20% under rating figure, the 1300.1 should make about 1100 watts into 2 ohm. Does that sound about right? I looked for a tech sheet like is available for the Elites and couldn't find it.
I'm trying to decide on an amp that can deliver 1000-1200 watts at 2 ohms, and the 1300.1 is certainly more space friendly.
Thanks!