Phoenix Gold Phorum

Hi, i been biding on an TI-SDT but its getting expensive thought i would ask if they are hard to finf and what they are Worth?.
If i got this right it shows the voltage the amp is getting and it got the low voltage light on the box, what else is it for and can i buy a RMD display and hook it directly to the amps that got RDDP?.

The RMD does not work with the RDDP port of the amps. It can but it will have to get modified....pretty easy if you know the diagrams/schematics (around electronics). I sent you a PM regarding RMD and RDDP's.

The box for my RMD's state "for Tantrum/QX and ZMX".....but can modified to work with RDDP ports (info in PM).

the sdt is made to hook into the rlink. Not sure what to value them at as I saw a couple go on ebay for $50 recently but I would not go less then 100 for the ones I have.

I just sold one recently for $100 USD.

In my eyes the SDT is a RMD with three extra status LED's (thermal, Overload, On), the display with two LEDs I completely dislike because the voltage read out is based on the color of the LED instead of an actual digit read out.

I must be missing something as I don't know why the external RDDP unit is used or needed (I don't need it with my custom RMD display....which has the thermal/overload/on LEDs).

custom rmd?

Yes custom. I can even change the three LED's into a single LED that changes colors (according to amplifier status the single LED would change color just like the ones used for the RDDP RLINK system.

I did one a few years ago that was one led that shown the status of the amp, thermal, protection and normal

its not too hard to get a 3 color led although if I remember correctly it was a little strange as it was a common anode led if I remember correctly. there is a ground pulse from the amp/rlink that turns it on

If anyone is looking for r-link sdt kits pm me I have a couple I can let go for a fair price.

ttocs wrote:its not too hard to get a 3 color led although if I remember correctly it was a little strange as it was a common anode led if I remember correctly. there is a ground pulse from the amp/rlink that turns it on

If anyone is looking for r-link sdt kits pm me I have a couple I can let go for a fair price.

I got very Lucky and got a set r-Link with the RMD for around 60$ on an auction, but i do not know if it works so its a bit of a gamble.

that would be about the average price with the rmd. Those are nowhere near as rare as the sdt. You will need to modify the wiring a bit to get it to work with the r-link, you would be better off using it with out the rlink really.

That sucks but ill try to do something with it, i tried to find picture of the sdt kit but that was hard.
Does the sdt kit comes with a box like the r-link?.

the ti-sdt kit came with the rlink and the sdt. There was no kit made with the rlink and the rmd if they are together the someone put them together.

ttocs wrote:the ti-sdt kit came with the rlink and the sdt. There was no kit made with the rlink and the rmd if they are together the someone put them together.

It is a TISDT kit, its in TI colout but the display is missing the PG logo and the writing that explain what the different led colours are.

Hi, i see that the SDT-TI kit had R-link box ant the Display with led but i also see a wire with two led bulp that goes to the second output port in the R link.
Does anyone have one of this or know how i can make one i got RJ45 plug with wire so its what the different pin are for that i would need, if anyone got one please tell me i would love to have it with the silver wire i may also need the silver wire from r-link to the amplifier if the seller does not find it.

I have the led kit pm me and we can work something out.

ttocs wrote:I have the led kit pm me and we can work something out.

Check innbox

I need the wire from RDDP port to the R-Link box, i found a store in Norway who got the XBC50 cable it says it for the ZPA amps but can i use this.
I realy wanted the original alu look wire thet goes with the kit but at this point i just want to get it installed, if someone got one let me know may also be interested in a display if price is right i live in Norway so it have to be shipped.

The RDDP is an ethernet cable also known as RJ45 8position. Now am not familiar with the whole Rlink box so am not sure how the ends suppose to look , by this I mean I don't know if you put both ends together if the colors are going to match or be opposite (hope this makes sense, if not I can find a pic).

These cables are CHEAP!!! So don't over pay for it, PartsExpress sells them anywhere from 2.00 to 12.00 depending on length and quality.


I got your package ready to ship, but if you want me to hold on for another day and include a cable let me know ASAP...otherwise I'll drop the package off at the post office today in a 2 hours.

No i got found one in my wire box so just ship it, im going to find one in right colour in a online shop i think i saw a flat rj45 cable somewhere i thought the rj45 was the old phone wire so i mixed it up

No problem, dropped it off already at post office you should get it within 10 business days.