Zx450 sensitivity pot
Posted: Sun Aug 18, 2019 12:25 pm
Hey guys been out of it for a bit. I did get around to building to a system around my 2 zx amps. Love, love love the sound of these!
I swapped out the input caps on the zx450 and both input and rail caps on the zx350. Been jamming for about 2months now.
Now to the issues. I need to find out where to get and the part # for the input sensitivity pot for the zx450. Its cutting out on the left rear channel. But comes back in when you lightly tap or wiggle the pot. It only affects the left rear channel. I have swept it back and forth multiple times to no avail.
The next issue is that sometimes when the truck has been sitting for a day or so and I get in and fire up the truck sometimes I get a series of thumps through my subs going through the zx350. They start out louder then get softer and go away. Gonna say maybe 5 to 10 thumps. Only happens maybe 1 out of 10 times when I fire the system up. And happens before the music starts up. Takes my retrosound head unit a few seconds to boot up.
Any and all help is greatly appreciated! Thanks.
I swapped out the input caps on the zx450 and both input and rail caps on the zx350. Been jamming for about 2months now.
Now to the issues. I need to find out where to get and the part # for the input sensitivity pot for the zx450. Its cutting out on the left rear channel. But comes back in when you lightly tap or wiggle the pot. It only affects the left rear channel. I have swept it back and forth multiple times to no avail.
The next issue is that sometimes when the truck has been sitting for a day or so and I get in and fire up the truck sometimes I get a series of thumps through my subs going through the zx350. They start out louder then get softer and go away. Gonna say maybe 5 to 10 thumps. Only happens maybe 1 out of 10 times when I fire the system up. And happens before the music starts up. Takes my retrosound head unit a few seconds to boot up.
Any and all help is greatly appreciated! Thanks.