Bass Cube Remotes

Need help with your car stereo system? Have a technical question? Post here.
User avatar
12voltjunky
Posts: 565
Joined: Tue Dec 15, 2009 5:10 pm
Location: Atlanta, GA

Post by 12voltjunky »

Jacampb2 wrote:I'm cutting a batch of 16 boards right now. I am not sure how I am set on components, but I should have a handful done in the next few days.
Spot on :clap:
you told me that you would know something around the 21st on
another batch. A man of his word, folks.
1- Zx 400 Ti
1- Ti 600.2
1- Ti 500.4 (resurrected by valeks1)
2- Ti 500.4
2- Ti 1000.2
2-Ti RMD, Lpl, PG 1/0 Ga
Ti 6.5 comps, Ti 5x7 coaxials
User avatar
Jacampb2
Mad Scientist
Posts: 1562
Joined: Sat Apr 19, 2008 11:57 pm
Location: Beaverton 48612

Post by Jacampb2 »

I have a little problem. My Bass Cube was installed in my Jetta, the trunk leaked during the last rain storm here and it dripped right on the BC. It looks like it only took out two op amps in the Cube, and I have replacements on order, but until I get it fixed I have no way of testing the remotes, so it will be a while before I can commit any for sale. I have enough components for five remotes, I will keep you all updated on what the status is...

Later,
Jason
M: M100, M44 for a custom amp project
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
oldschoolfan
Posts: 897
Joined: Wed Nov 25, 2009 11:08 am
Location: Burb of Detroit

Post by oldschoolfan »

Jacampb2 wrote:I have a little problem. My Bass Cube was installed in my Jetta, the trunk leaked during the last rain storm here and it dripped right on the BC. It looks like it only took out two op amps in the Cube, and I have replacements on order, but until I get it fixed I have no way of testing the remotes, so it will be a while before I can commit any for sale. I have enough components for five remotes, I will keep you all updated on what the status is...

Later,
Jason
Want to borrow a cube?
User avatar
528hz
Posts: 22
Joined: Fri Aug 21, 2009 7:21 am

Basscube remote

Post by 528hz »

Jacampb2



Are you still making the Basscube remotes? I would like to buy one from you if I could...

Thanks a lot in advance, and take care, Sir.
gridracer
RIP
Posts: 1853
Joined: Wed Dec 20, 2006 7:19 pm

Post by gridracer »

Jason pm me your address so I can send it out mhyde sent the part you need to fix it to you already
Check my buyer/seller ratings http://phoenixphorum.com/gridracer-vt4548.html

I have more PG stuff than one guy ever needs.
lightbender
Posts: 1
Joined: Tue Feb 21, 2012 5:07 pm

Re: Bass Cube Remotes

Post by lightbender »

Hey there,

Inotice that this thread seems a little cold, but I, like so many others am looking for a remote.

Any chance you are still making these?

Or do you have a parts list so I can build my own?

thanks!
nutxo
Posts: 1685
Joined: Sun Feb 10, 2008 4:25 pm

Re: Bass Cube Remotes

Post by nutxo »

lightbender wrote:Hey there,

Inotice that this thread seems a little cold, but I, like so many others am looking for a remote.

Any chance you are still making these?

Or do you have a parts list so I can build my own?

thanks!

bizzarre..............
User avatar
Jacampb2
Mad Scientist
Posts: 1562
Joined: Sat Apr 19, 2008 11:57 pm
Location: Beaverton 48612

Re: Bass Cube Remotes

Post by Jacampb2 »

A little Zombie thread revival...

When I did the DLM boards I had to order a total of 100 square inches of PCB made to get the rather sizable price break at Oshpark. So, rather than order a ton more of the DLM boards (I already had 20 in the order) I redrew the BC remote boards again and had some of those professionally made as well. I mentioned elsewhere that the US distributor no longer has the switched pots, so I bought a tray from China to make these. I fully intend to put them on Ebay as well because I have a lot of money into potentiometers right now... The Frequency pot now also has a removable shaft. The remote will still fit the factory bracket by panel mounting with the gain pot's threaded shank, but it will no longer be able to be screwed into the back standoff because of the change in the frequency pot style. It still can be easily panel mounted, or mounted in the factory bracket, but you can only use the one mounting point.

Pic:

Image

Later,
Jason
M: M100, M44 for a custom amp project
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
oldschoolfan
Posts: 897
Joined: Wed Nov 25, 2009 11:08 am
Location: Burb of Detroit

Re: Bass Cube Remotes

Post by oldschoolfan »

Would you put me down for three please.
Harrymilly2
Posts: 2
Joined: Tue Apr 18, 2017 4:02 pm

Re: Bass Cube Remotes

Post by Harrymilly2 »

Hi everyone I just joined this forum and l need 1 of the bass cube remote can anyone tell me how to order one of these I have recently bought PG basscube and it has came without the remote so I am desperate to get one to hear the improvements to my sound on the low frequencys.
User avatar
Jacampb2
Mad Scientist
Posts: 1562
Joined: Sat Apr 19, 2008 11:57 pm
Location: Beaverton 48612

Re: Bass Cube Remotes

Post by Jacampb2 »

PM'ed you.
M: M100, M44 for a custom amp project
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
9234pilsy
Posts: 1
Joined: Wed May 10, 2017 7:30 am

Re: Bass Cube Remotes

Post by 9234pilsy »

I would like one too please...I am new to forums and apologize for my ignorance.

I tried sending a PM to you and not sure if I did it correct?

I can just picture all of you rolling your eyes at me..LOL

Sorry
User avatar
Jacampb2
Mad Scientist
Posts: 1562
Joined: Sat Apr 19, 2008 11:57 pm
Location: Beaverton 48612

Re: Bass Cube Remotes

Post by Jacampb2 »

Nope, it didn't work, but I'll send you one and I'll include my email address.

Thanks,
Jason
M: M100, M44 for a custom amp project
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
User avatar
denim
Posts: 1333
Joined: Wed Feb 13, 2008 7:20 am
Location: SSA Inc. HQ (Maryland)
Contact:

Re: Bass Cube Remotes

Post by denim »

I need a new BC and remote sadly. :(
User avatar
Jacampb2
Mad Scientist
Posts: 1562
Joined: Sat Apr 19, 2008 11:57 pm
Location: Beaverton 48612

Re: Bass Cube Remotes

Post by Jacampb2 »

I have two remotes left... Then I have to deal with China again...
M: M100, M44 for a custom amp project
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14783
Joined: Fri Dec 19, 2008 9:53 pm

Re: Bass Cube Remotes

Post by ttocs »

put me down for one. An old friend had his truck broken into and they took the part of the dash the remote was attached to
what else can I say I am a grumpy asshole most of the time.
TeleThunder
Posts: 4
Joined: Tue Mar 29, 2011 3:02 am

Re: Bass Cube Remotes

Post by TeleThunder »

Thank you Jason:) Received my Cube today, looks very good :mrgreen:
Keep up the good work :clap:
Nickmcc1
Posts: 2
Joined: Fri Aug 19, 2022 6:19 am

Re: Bass Cube Remotes

Post by Nickmcc1 »

Any one making bass cube knobs????
User avatar
Jacampb2
Mad Scientist
Posts: 1562
Joined: Sat Apr 19, 2008 11:57 pm
Location: Beaverton 48612

Re: Bass Cube Remotes

Post by Jacampb2 »

We still make them, but probably not fit much longer. I'm almost out of the specialty gain pot and I've not been able to source more.
M: M100, M44 for a custom amp project
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
Doglife01
Posts: 5
Joined: Sat Jan 21, 2023 1:12 pm

Re: Bass Cube Remotes

Post by Doglife01 »

Need 4 knobs
Post Reply