My new/old Captures!!! Update 01/05/09
My new/old Captures!!! Update 01/05/09
Hi Guys,
here i will show you my newst Capture:
One MS1000 - Bild 1:
Both MS1000 - Bild 2:
Here both with the 10th Anniversery Plexishield:
Here from the long side:
Regards from Germany
Bachwatz(Joerg)
here i will show you my newst Capture:
One MS1000 - Bild 1:
Both MS1000 - Bild 2:
Here both with the 10th Anniversery Plexishield:
Here from the long side:
Regards from Germany
Bachwatz(Joerg)
Last edited by Bachwatz on Sun Jan 04, 2009 10:18 pm, edited 1 time in total.
- fuzzysnuggleduck
- Soy Milquetoast
- Posts: 4423
- Joined: Wed Dec 06, 2006 1:08 pm
- Location: The best place on earth
- Contact:
Hi,
they would be installed one is for Tweeters and the Sub and the other one is for the Midrange and the Doorspeakers.
My Headunit is a Alpine 7998 with a PXA and the Speakers in the front are from Audio Development(Italian Manufacture), the Sub is from Helix
regards
they would be installed one is for Tweeters and the Sub and the other one is for the Midrange and the Doorspeakers.
My Headunit is a Alpine 7998 with a PXA and the Speakers in the front are from Audio Development(Italian Manufacture), the Sub is from Helix
regards
Bachwatz
[u][b]Sell:[/b][/u]
Now on www.ebay.de, Itemnumber: 260421458293
[u][b]Sell:[/b][/u]
Now on www.ebay.de, Itemnumber: 260421458293
- fuzzysnuggleduck
- Soy Milquetoast
- Posts: 4423
- Joined: Wed Dec 06, 2006 1:08 pm
- Location: The best place on earth
- Contact:
- nico boom
- Deus ex MS
- Posts: 2089
- Joined: Fri Jan 05, 2007 1:40 pm
- Location: the land of wooden shoes
Hi; sorry for not saying ****WELCOME!!**** first, you recently joined the club I see.
Be very happy with your amps; especially here in Europe they are VERY RARE!
If you need anything regarding MS amps, you can always PM me; I have been gathering a lot of MS stuff over the years.....sometimes a bit too much.
Both MS1000's have the oldstyle- connectors now; I changed the endplates and connectors, so now both amps look the same.
vielleicht treffen wir uns einmal mein PG freund!
Nico
Be very happy with your amps; especially here in Europe they are VERY RARE!
If you need anything regarding MS amps, you can always PM me; I have been gathering a lot of MS stuff over the years.....sometimes a bit too much.
Both MS1000's have the oldstyle- connectors now; I changed the endplates and connectors, so now both amps look the same.
vielleicht treffen wir uns einmal mein PG freund!
Nico
Hi,
@Nico
Thanks for you Supporting offer, but i know the MS Amps, they are not my first.
I hope we will see us anytime, are you on Sound Quality Contests???
In 2009 i will be on any AYA(www.ayasound.de)-Sound Quality Contests, you must look on the News or under Termine and than you can see the Events but i think before March there will be nothing to read.
In 2009 the Car-Audio- Convention which was the last ten years in Sinsheim will be in Cologne, that are a few steps for you from Holland.
Maybe we will see us there!!!!
Regards
@Nico
Thanks for you Supporting offer, but i know the MS Amps, they are not my first.
I hope we will see us anytime, are you on Sound Quality Contests???
In 2009 i will be on any AYA(www.ayasound.de)-Sound Quality Contests, you must look on the News or under Termine and than you can see the Events but i think before March there will be nothing to read.
In 2009 the Car-Audio- Convention which was the last ten years in Sinsheim will be in Cologne, that are a few steps for you from Holland.
Maybe we will see us there!!!!
Regards
Bachwatz
[u][b]Sell:[/b][/u]
Now on www.ebay.de, Itemnumber: 260421458293
[u][b]Sell:[/b][/u]
Now on www.ebay.de, Itemnumber: 260421458293
Hi,
so, yesterday the next step of work on my Car.
I make the bottom of my trunk with laminate:
Here the left Side of the trunk with a Helix XXL(it´s a Power Supply):
For the right Side i need more Laminate:
On the left Side you can see a Connection Audison Fuse Holder:
So, from Sunday the 7th to Thursday the 11th of December i will stay in Las Vegas for Shopping and Gambling.
Regards
so, yesterday the next step of work on my Car.
I make the bottom of my trunk with laminate:
Here the left Side of the trunk with a Helix XXL(it´s a Power Supply):
For the right Side i need more Laminate:
On the left Side you can see a Connection Audison Fuse Holder:
So, from Sunday the 7th to Thursday the 11th of December i will stay in Las Vegas for Shopping and Gambling.
Regards
Bachwatz
[u][b]Sell:[/b][/u]
Now on www.ebay.de, Itemnumber: 260421458293
[u][b]Sell:[/b][/u]
Now on www.ebay.de, Itemnumber: 260421458293
- deathcloud
- Posts: 680
- Joined: Sun Jul 06, 2008 10:47 am
- deathcloud
- Posts: 680
- Joined: Sun Jul 06, 2008 10:47 am
hahaha i was just totally kidding. I would not do tile at all. Because it is heavy and I don't want my trunk looking like my house. But I like his look because it looks nice. I have to think of some other material.
Kenwood Excelon x592
x200.4(in process of repair OMFG YES)
rsd65cs front
rsd65cs rear
x1200.1
2 rsdc124
using zx350 until repair of x200.4
x200.4(in process of repair OMFG YES)
rsd65cs front
rsd65cs rear
x1200.1
2 rsdc124
using zx350 until repair of x200.4
- deathcloud
- Posts: 680
- Joined: Sun Jul 06, 2008 10:47 am