Car Wiring
Posted: Fri Apr 16, 2010 5:31 pm
Alarm wiring aid. Nice resource.
HH
Phoenix Gold Phorum
Celebrating the Phoenix Gold legacy, and oldschool car audio!
https://www.phoenixphorum.com/
Car Wiring
Page 1 of 1
Posted: Fri Apr 16, 2010 5:47 pm
Posted: Fri Apr 16, 2010 6:32 pm
I recently used it when installing an alarm in my mustang and it was fairly correct. IT is hard to find resource that it 100% correct so it is important to undstand that this is just a map of where to dig for your wires, you still need to test them before connecting to them.
Posted: Fri Apr 16, 2010 6:36 pm
i was hoping it would have the speed sense wire for the pathy- BUT no 
Posted: Fri Apr 16, 2010 8:01 pm
I always use this one http://www.commandocaralarms.com/wiringsearch.asp
Posted: Sat Apr 17, 2010 10:03 am
I have one for that too, I don't remember it exactly but I'll try to track it down and post it.mhyde71 wrote:i was hoping it would have the speed sense wire for the pathy- BUT no
Posted: Sat Apr 17, 2010 1:06 pm
http://www.rostra.com/technical.htm
Look in the Cruise control pages, at the bottom is a VSS/Tach chart. The listings are not 100% complete but a large number are present. Otherwise you can call their support line and see if they may be able to assist. Keep in mind many new vehicles are running VSS direct to the computer through means of databus so options may be limited.
Look in the Cruise control pages, at the bottom is a VSS/Tach chart. The listings are not 100% complete but a large number are present. Otherwise you can call their support line and see if they may be able to assist. Keep in mind many new vehicles are running VSS direct to the computer through means of databus so options may be limited.