DD5 and DD10
DD5 and DD10
Any chance you guys will make these again? I am amazed at how many people are still looking for them and how they are getting prices higher then most of your current gear. Seems like a small production run would be super profitable............
- fuzzysnuggleduck
- Soy Milquetoast
- Posts: 4423
- Joined: Wed Dec 06, 2006 1:08 pm
- Location: The best place on earth
- Contact:
I think a distribution block + DD type device in one chassis would be awesome. Possibly a modular distro block so buyers could configure and pay for the right number of in/outs and at the sizes they need. I know it's asking a lot and I know I wouldn't buy one but damn, that would a sweet install piece to have a single point for power, group and remote delay across all amps, source(s) and processors!
SOLD: '91 PG 4Runner
.....................
Not a bad idea there Ryan........ but maybe.......
Black anodized aluminum like the amps...... Double the size of a DD10...... 1-1/0g in to 4-4g out for both power and ground...... Other side is DD10..... Already has +/- so a remote wire set screw connection is needed...... Maybe contains a voltage display........ BIG ASS window with "Phoenix Gold" to see in.......... BRILLIANT!!!!!!!!
Where's Jacampb2.......... WE NEED A MOCKUP STAT!!!!!!!!! I smell super kustom awesomeness with this idea.............
Not a bad idea there Ryan........ but maybe.......
Black anodized aluminum like the amps...... Double the size of a DD10...... 1-1/0g in to 4-4g out for both power and ground...... Other side is DD10..... Already has +/- so a remote wire set screw connection is needed...... Maybe contains a voltage display........ BIG ASS window with "Phoenix Gold" to see in.......... BRILLIANT!!!!!!!!
Where's Jacampb2.......... WE NEED A MOCKUP STAT!!!!!!!!! I smell super kustom awesomeness with this idea.............
Those tender little burgers with them little, itty-bitty grilled onions that just explode in ya mouth like flavor crystals every time you bite into one.. just makes me want to burn this muthafuka down.... Come on, Pookie, let's burn this muthafuka down!!!
- brenzbmr@sb
- Booty Connoisseur
- Posts: 1607
- Joined: Wed Dec 06, 2006 9:49 pm
- Location: as ziggy marley said" on a beach in hawaii"
-
- Posts: 455
- Joined: Fri Jul 25, 2008 8:35 pm
- Location: ABQ, NM
- Contact:
I think incorporating a distro block into either would be an awesome idea.
Run main power ,ground, & remote to the dd10/distro, and it could maintain & control the entire system from the one point.
Call it the "PG Powerstation", it wouldnt have to match the amp lines like the previous DD's did but with cosmetics that will compliment all of the amps would be cool, not to mention it wouldnt limit users to just PG gear it would look like it belonged in any install. (increasing the PG phan club) And for voltage display, just put an RMD port on it & call it a day.
I would buy one in a heartbeat.
Run main power ,ground, & remote to the dd10/distro, and it could maintain & control the entire system from the one point.
Call it the "PG Powerstation", it wouldnt have to match the amp lines like the previous DD's did but with cosmetics that will compliment all of the amps would be cool, not to mention it wouldnt limit users to just PG gear it would look like it belonged in any install. (increasing the PG phan club) And for voltage display, just put an RMD port on it & call it a day.
I would buy one in a heartbeat.
one of the single most brilliant idea's any audio company ever had was the dd5/10, i was shocked when pg stopped making it almost every competition car had one..
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
In fact make them with cosmetics that would compliment any amplifier brand and i'm sure it would be a hit and turn people over to PG.audiophyle_247 wrote:I think incorporating a distro block into either would be an awesome idea.
Run main power ,ground, & remote to the dd10/distro, and it could maintain & control the entire system from the one point.
Call it the "PG Powerstation", it wouldnt have to match the amp lines like the previous DD's did but with cosmetics that will compliment all of the amps would be cool, not to mention it wouldnt limit users to just PG gear it would look like it belonged in any install. (increasing the PG phan club) And for voltage display, just put an RMD port on it & call it a day.
I would buy one in a heartbeat.
I know I would buy one.
Not having to deal with seperate relays and having as many 4 gauge outs to accomodate an entire system in one tidy package is a GOD send.
////Alpine/PhoenixGold/MBQuart/ImageDynamics/Soundstream
A nice feature would be the ability to add power in/outs.
possibly make the basic package handle 3 convertible 4/0 gauge ins/passthroughs for each power and ground....with 4 for each on the out put side.
You add another amp....you add piece similar to the Stinger T-Blocks which is what I currently like to use.
Except these wouldn't need to be daisy chain wired since they would attach to the power or ground grid in some manner.
Modular is the way to go baby!!!
possibly make the basic package handle 3 convertible 4/0 gauge ins/passthroughs for each power and ground....with 4 for each on the out put side.
You add another amp....you add piece similar to the Stinger T-Blocks which is what I currently like to use.
Except these wouldn't need to be daisy chain wired since they would attach to the power or ground grid in some manner.
Modular is the way to go baby!!!
////Alpine/PhoenixGold/MBQuart/ImageDynamics/Soundstream
- mr tibbs
- Forum Goatee
- Posts: 3895
- Joined: Sun Dec 17, 2006 3:03 pm
- Location: The land of morons, I mean mormons.:(
I want one right now. Seriously, I would rewire my entire car if these were available.
And for the offroad crowd something like this with "plugs" of some sort would kick ass!! If I could have some sort of DD5 with "plugs" wired into the back of my FJ I would love it!! Plug in an air compressor, plug in a fridge, plug in a drill (all 12 volt of course) hell the possibilities are endless!!!
And for the offroad crowd something like this with "plugs" of some sort would kick ass!! If I could have some sort of DD5 with "plugs" wired into the back of my FJ I would love it!! Plug in an air compressor, plug in a fridge, plug in a drill (all 12 volt of course) hell the possibilities are endless!!!
[url=http://www.usbr.gov//][img]http://www.usbr.gov/images/banner-3.jpg[/img][/url]
I'M GONNA BRING THIS BACK TO THE TOP!!!!!!!
This seems to be the most sought after of all the install goodies PG has ever made.
This seems to be the most sought after of all the install goodies PG has ever made.
Those tender little burgers with them little, itty-bitty grilled onions that just explode in ya mouth like flavor crystals every time you bite into one.. just makes me want to burn this muthafuka down.... Come on, Pookie, let's burn this muthafuka down!!!
just repaint or orginal one then add some cool decalsPedi wrote:Yeah Fuzzy, I must agree to that. Too bad they did not start to make them earlier, with MS-colors...
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!