![Image](https://driiive.com/assets/cars/7036bcf4b29ffcf29666f4fa4e4a60284050093d/photos/2812911406838403-94b2e48a2e.jpg)
I didn't like the way the cf stripe just ended at the hood so I made this insert from fiberglass that will rest on the center portion of my grill area that is below the mustang emblem in this pic.
![Image](https://driiive.com/assets/cars/7036bcf4b29ffcf29666f4fa4e4a60284050093d/photos/3248031397079062-4e6daf8c9f.jpg)
![Image](https://driiive.com/assets/cars/7036bcf4b29ffcf29666f4fa4e4a60284050093d/photos/8470971416431740-42b5a532ed.jpg)
And after sanding it smooth I am going to skin it with carbon fiber.
![Image](https://driiive.com/assets/cars/7036bcf4b29ffcf29666f4fa4e4a60284050093d/photos/4434501416602755-449e425c6f.jpg)
I got a big kit because I also want to do the roof of the car. On the sn95 mustangs(94-04) the center portion of the roof is about 1/16" lower then the side that connects to the A and C-pillars. I don't have a pic to show you sorry but the top of the a and the c-pillars are removable and sit on top of the center section so it will make it really easy to skin the center and then put those pieces back on.
I also have enough material to cover my LE octane that the finish is coming off of and as well as a dd10 and dd5 I am using in the install.