Reactor illumination

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
bunch62
Posts: 37
Joined: Tue Oct 11, 2011 10:47 pm

Reactor illumination

Post by bunch62 »

Hi has anyone had to replace the illumination tubes on the reactor amp and with what thanks Allan
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14783
Joined: Fri Dec 19, 2008 9:53 pm

Re: Reactor illumination

Post by ttocs »

its green right? I have some of the blue pg neon from the amps after that but not sure where to send you for green other then google
what else can I say I am a grumpy asshole most of the time.
User avatar
Jacampb2
Mad Scientist
Posts: 1562
Joined: Sat Apr 19, 2008 11:57 pm
Location: Beaverton 48612

Re: Reactor illumination

Post by Jacampb2 »

Pretty sure it was purple/UV originally. At least mine was IIRC. Anyhow, you can buy cold cathode lamps in nearly any color. Don't really need neon to get the factory look. Look on Newegg for case lighting. I have bought red and blue CCFL lamps to repair soundstream tarantulas and my davinci. You could also go with LED strip lighting since you don't view the tubes directly. There is also a LED "neon" tube strip now that is highly diffused, that would work as well. For me though I would stick with CCFL/neon. I like the more even illumination even if it is fragile.

Good Luck,
Jason
M: M100, M44 for a custom amp project
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
bunch62
Posts: 37
Joined: Tue Oct 11, 2011 10:47 pm

Re: Reactor illumination

Post by bunch62 »

Thanks for the replies will look into to see if there is a supplier here in uk
Post Reply