Reactor illumination
Reactor illumination
Hi has anyone had to replace the illumination tubes on the reactor amp and with what thanks Allan
Re: Reactor illumination
its green right? I have some of the blue pg neon from the amps after that but not sure where to send you for green other then google
what else can I say I am a grumpy asshole most of the time.
Re: Reactor illumination
Pretty sure it was purple/UV originally. At least mine was IIRC. Anyhow, you can buy cold cathode lamps in nearly any color. Don't really need neon to get the factory look. Look on Newegg for case lighting. I have bought red and blue CCFL lamps to repair soundstream tarantulas and my davinci. You could also go with LED strip lighting since you don't view the tubes directly. There is also a LED "neon" tube strip now that is highly diffused, that would work as well. For me though I would stick with CCFL/neon. I like the more even illumination even if it is fragile.
Good Luck,
Jason
Good Luck,
Jason
M: M100, M44 for a custom amp project
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
Zx: Zx500, Zx450, Black Zx350
ZxTi: 4 Zx600Ti's, 1 Zx400Ti
Ti: 5 800.1's & 900.7 for a custom amp project. 1 1200.1, 1 1000.2
Tantrum: 2 1200.1's, 1 600.4, 1 500.2
XS: XS6600
Re: Reactor illumination
Thanks for the replies will look into to see if there is a supplier here in uk