MS2125 or MAC500. I need rail caps voltage

wooferdog wrote:what are the specs on the original Pg plug?

5.25mm

Caps has nothing to do here. Loose connection on B+ and B- terminals

If you buy the Molex plug from Digi-Key then you need to buy and replace header too because pitch is 5.00mm.

You can replace diode with 1N5401 - 1N5404

This processor was design by Sunfire so look for one of Sunfire 2006 processors.

I have New remote control and Remote control programing manual.

Power supply blowup.

Ultra-Fast Plastic Rectifiers, Forward Current 8.0 A

Gain http://cgi.ebay.com/NEW-ALPS-50K-Pot-Dual-Phoenix-Gold-Amplifiers-OEM-/300545956362?pt=Car_Amplifiers&hash=item45f9ef5a0a Bass http://cgi.ebay.com/NEW-ALPS-Dual-Pot-10k-Ohm-Phoenix-Gold-Amps-OEM-/290478227552?pt=Car_Amplifiers&hash=item43a1da0060 just wondering if you might know if thi...

This is for FREQ pot for ZX450
http://www.ebay.com/itm/290504825576?ss ... 1558.l2649

Ship it to us and we will fix it for you.

ALTSER
Portland Oregon USA

R500 - 100 ohm 5%
R600 - 100 ohm 5%
R523 - 10.0k ohm 1%
R539 - 100 ohm 5%
R526 - 0 ohm
R521 - 10.0k ohm 1%

Gain
http://cgi.ebay.com/NEW-ALPS-50K-Pot-Du ... 45f9ef5a0a
Bass
http://cgi.ebay.com/NEW-ALPS-Dual-Pot-1 ... 43a1da0060

audiophyle_247 wrote:Offered them when I asked previously, so I assume so. Still may have him repair one of my 475s, but I enjoy working on this stuff so I plan to give it a go first. lol

Just cycling the pots up & down will help? Should I use any type of cleaner or just cycle them dry?

Do not use any cleaner

ttocs wrote:yes, with power off, turn them back and for 15-20 times and that will clean them.

If they are scratchy sounding while adjusting,then this will help

Most PG potentiometers are custom made by different manufactures like ALPS and other. You can still order them but the minimum order is 1000 sometimes 500 and the lead time is about 26 weeks. If you want to order the FREQ pots for TI it's will cost you around $ 4000.00.

NO!!!!! NO!!!!!!! NO!!!!!

If you want to use your XS2500 as a space heater, then go ahead and run it at 2 ohm bridged. A weak point in the XS2500 is the connection between the power connector and the PCB. If B+ or B- terminals get hot after you run your system for while at 2ohm bridge or 1ohm stereo it time to send the ampli...

1.Blue LED show you the amplifier status
2.Just push LED from inside.

It's Ryval A4.50 was build for BBG Distribution LTD in UK. It,s cheapest 4 ch amplifier PG ever build

I think the ribbon cable is fine because amplifier work in bypass its just something happen with crossover. Check RN500

THERMISTOR 2.2K @ 110deg C

Check fan it's installed backward. If you keep this way right channels will overheat.

Are you using the bridged front as one channel and the bridged rear as the second channel? I have Xenon X1200.1 available.