age has nothing to do with the failures, pg used shitty copper for the bus bars, and they made a severe design flaw, in order to make the package pretty, and in all one chassis- the way that alumapro does their own caps doesnt allow for the oxidation or the flex issue with the fragile tabs- once you...

I have an ugly zx450 laying around, it works, so if you cant find parts, and your willing to deal with shipping hassles, maybe we can work something out

Have had 6 or more dealings with derek and always a man of his word, more than fair in all his dealings- dont hesistate to buy or sell anything to him, it always turns out right!

way into double digits dealing with bryan- great guy and really flexible and fair on every one of our deals- dont hesitate to deal with him-

for a 200 amp alternator, yes you are correct, its pretty straight forward, and gotten cheap over the years, the trick comes when you need more than 200, then you need a kind machinist who takes pitty on you and have a love of audio, to figure out how to bracket 3 alternators on a little 2.2 liter, ...

yes you could do that if your running a small block v8,try doing it on a little 4cylinder, no one makes anything that allows you to double/triple your alternator, then you have to spend time reinventing the wheel,,,,, the original question isnt what is economically prudent, the question was do they ...

I have 3 in my system and they do work....if you have the rest of the system taken care of..... its kind of like buying 'the one' and stopping there with the system...in reality the amplifier is the easy and fairly affordable part of the install compared to all the other crap you need to do to suppo...

I have a really nice pair of musicomp mbquart 3way crossovers......

actually the first price was less than 7000.00, and when I tried to buy the thing, they decided to keep people from asking to own one, that they would raise the price and make it ridiculous- when it was listed for 7k, I was told then that the power supply needed to finished and that would probably b...

there is a pink noise generator on the rta, get a 1/4 to stereo rca connector, plug that into your signal processor, after the head unit- then begin to flat line the eq curve as much as possible- then connect your headunit back into the circuit, leave the controls flat, you are equalized at that poi...

are they pewter gray, or are they the titanium grey- I think there should be an interior code on the glove box door- if they are pewter they will probably be easier to find-....nothing on ebay?

just do a double 3/4 on the baffle, you will be fine, the rest of the box in 3/4 will be totally acceptable

2 opposite decisions there derrick, the dd are an awesome sub, the morels are an accurate sub... if you want a 2x4 to slap you upside your skull, then go for 4 of the dd's

I think they call it 'chop' at tap plastics

depending on the cap, if its a good 'real' 1 farad cap there is a very good use for it- check out the you tube video by ixos on capacitors- it will make a believer of the naysayers on the forum when it comes to caps- the kinetik hype is just that, hype, its not the same as a 100 farad cap, blah,blah...

that is what you give up for convenience, that why epicenter, and pieces of that ilk continue to sell, go to audiocontrols website, and they go into further detail of how badly mp3 sucksssssss! yeah you can carry 50000 songs in a device the size of a pack of cigarrettes, but at what cost----- mp4 wa...

the knu concepts aluminium crap,is just that- why bother- your not really gaining anything by going 0 gauge with that stuff- seriously I have more wire in my install than probably any single system on this board, and I strongly suggest you do not use this product- you can argue the math, and merits,...

if your keeping it forever, it isnt stupid, if you change directions like many do- then you have a fairly rare amplifier, that you have 'changed' forever- if it were a zx350, or even a zx500 wouldn't think twice about 'customizing' it

if your just running straight ipod, really doesnt make a difference what you do sound wise, as your source sucks--- convenience yes, sq no- so a little noise one way or the other will not outweigh how bad your original source is anyway

I have seen a lot of pg proto's and that definitely doesnt look pg to me

awesome deck, no frills, great sq- even way less frills than the drz-

dont ditch the tweeter protection of the crossover to go active on the tweeters.....other wise the nerd in you will be shopping for tweeters....as running active is likely to kill these without warning-

Another good deal with mike- even better than expected, thanks again

I had 3 of them and got rid of them for output reasons/ back in the day they may have been something but not so much anymore- limited frequency and the mechanical clack if over driven- just not worth it unless you want one to have one

Another effortless deal with Derrick- thanks again