As above, just had a ZX500 re-cap and service. Good price, quick turnaround and you can rest easy knowing your amp is in capable hands.

I do like the subs, but having read numerous times on different forums how subs have come on in leaps and bounds over the years I was expecting to be told "swap for 'x' much better, you'll never look back" etc. but if that isn't the case then a repair/refurb may be in order. I have looked ...

The time has come to replace my much loved, used and abused subs. Ive been rocking these for 14yrs on various amplifiers ranging between 600 and 1500 watts for the pair and they've lapped it up. I'm only replacing due to the foam surround begining to crack. http://www.audiorama.com.br/kicker/#Freeai...

Anyone own or have any experience of the new rubicon class d mono's specifically the rub1.2500? I'm considering buying one but I'm put off a little by the fact the rated outputs aren't given at a specific voltage, the other ranges on their website have ratings at 14.4v but the rubicons don't :? I kn...

Hi all, looking to buy rsd comps but can't find any in the U.K. I've found a few on U.S eBay but the cost of shipping is extortionate. Does any member have a good set to sell or a link to a vendor that doesn't charge through the nose for shipping? Also what sizes were these available in? I thought t...

Thanks for the input, this is in my gf's car the 600ti and the sapphire are in mine. The subs a dual 4 and I wanted to run it A/B. I had a look around and couldn't find anything suitable (2ohm stable bridged) the 600.4 came up on eBay so I bought it. I've fitted it now, set it up with DSO nano and i...

I've got a 600.4 that I want to drive a dual coil Alpine type R with (front and rear bridged to a coil each) and want to know which position the config switches should be. I've had a look at the manual and it seems like I can send one set of rca's from the sub pre out and the amp will use this one i...

Sorry to jump into this thread, I've just ordered one of these and am wondering what the max input voltage is? The bumf says 80v with x1 probe, would this be the same with the x10 probe? My mate wants his amps scoping and I'm sure they'll do a fair bit more than 80v before they clip. Anyone shed any...

marko wrote:careful with the seller, he already sold it once and it magically came back up for sale pulled the old "seller didn't pay" routine

i would say around the £250 mark in that condition without box or anything..

Thanks for the heads up, I think i'll let this one slide

Looking for a bit of info on this please as there's one on ebay uk starting at £100 and i'm very tempted to add it to my little collection. I can't find much info on google at all so anything you guys can tell me would be great. What are these worth? Its not boxed but looks to be in good condition. ...

Already done the big 3, I have 0awg to a fused distribution block in the rear and 4awg from that to the amp's. Could do with a stator re-wind to around 120 and an optima tbh.

Thanks for the replies guys, I shall now go ahead with the purchase

Hi guys, thinking of getting me one of these for sub duties and want to know if it'll be happy bridged at 2ohms and any general info on longevity, common prob's etc. Cheers me dears.

Thanks guys. I've got the chance to buy one for £55, is it worth the money and would it be a worthy replacement for my dead T500.2?

Any info and opinions on this would be great as I can't find much on google at all. Thanks in advance good people.

I have 2 Tantrum amps that require repairing, a 500.2 that blows the onboard fuses on power-up and a 1200.1 which is oscilating. Can anyone recommend someone in the U.K who will do a proper repair and wont try to rip me off. Thanks.

My mates system consists of 2x 18" Ground Zero Plutonium powered by 2x Hifonics XXV Collosus II, 6 pairs of Diamond Audio 6.5" components powered by 3x Kenwood KAC 7204. It recently hit 158db and is one of the loudest cars in the uk. A few people have tried telling him to replace the Kenwo...

Its my amp that needs repairing, not the kenwood.
Its a KAC 7204 he's lent me.

My mate has recently told me he thinks my Tantrum amps are shite, he reckons PG in general are unreliable crap and he only rates the MS range. This came about after my T1200.1 started playing up and he lent me a 2 Channel Kenwood amp to run in its place until its repaired which he reckons sounds far...

Thanks for the replies guys, I hope its a cheap repair. My T500.2 went pop on christmas day and is going to cost £150 to repair. Any idea how much it should cost to replace the output transistor?

Has anyone experienced anything like this? No signal to the amp and gain turned right down the same thing happens, subs draw right the way in then push right out at a rate of about 5 cycles per second.

The subs are moving in and out at a steady rate to what looked like the peak of their excursion. While this is happening it's drawing a lot of current the voltage on the power cap is quickly dropping. What are the symptoms of a failed tri path chip?

I have been using the T1200.1 for 2 months without any problems until today when i switched it on and it threw a fit :evil: When i powered it up the subs started throwing massively, the amp drawing lots more current than usual. I've tried disconnecting the RCA's but its no different :? can anyone ad...

Ok, just been to disconnect the speaker wires and its still blowing the fuses the amp appears to power up for a couple of seconds, draw a lot of current (the load on the alternator is significantly slowing the idle speed of the engine) then pop the fuses. Any idea what may need replacing?

Yesterday I had the system cranked both 30amp fuses in the side of the amp popped I replaced them and they blew again right away. The amp is running bridged at 2ohms and has been happily doing so for months, I didn't run it any harder than usual when this happened, the only difference was it was fre...