Ok, it actually does appear it's the Audison Bit Ten making the noise. I found some others having the exact same issue as me. Glad my Xenon is safe!!! (not so good for the Audison).

My setup is in a 2011 WRX. Stock HU sends high level into a Audison Bit Ten. That feeds both the Xenon X200.4 and a PDX M6. I am using the auto turn-on lead from the Audison that flips an internal relay when it sees voltage on the speaker line which sends remote power out to the amps. The problem I ...

Thanks for the response.

I'm sending in an X1200.1 to PG for repair. Their site says that the flat rate doesn't include cosmetic items, circuit boards or amps that had unauthorized repair. I had a shop look at the amp and they may have paritally disassembled it but no repairs were done. Is PG going to scoff at this? I was t...

stipud wrote:A fuckin' atoadaso!

(anyone get the reference... gridracer?)

You told me so?

Ricky from Trailer Park Boys?

Live and learn right guys? The monkey at the electronics place called today and said 4 of the outputs are blown and quoted me $275-$300 to fix it. He said it was $150 in parts alone. I laughed. :lol: :o Then he told me that he can't get it back together because it's in pieces until Thursday. I cried...

Cool Cool, I hope you don't need any outputs the IRF360LC can be a bit of fun to locate. Digi-Key has them at between 9 and 12 bucks each, just in case you need one or three... Good luck ! ...C :) If they sound sketchy at this place at all I've already gotten the green light to send it to PG from t...

Again realize that it does depend on the situation of the amp. And what kind of amp. The flat rate fee may be expensive if the work is cheap.... If the amp is blown all to heck, and is obviously not a $50 fix, paying PG to fix it is worth every penny. This is pretty much right along my line of thou...

Theres a old saying you get what you pay for, and with electronics its pretty much law... PG would have done you right, they always do. Best of luck getting your amp fixed :) This place came highly recommended to me and the guy was pretty old and seemed to know his stuff. We'll see when they come b...

They seem to go for about $225 plus shipping when I see them pop up on ebay. I bought it for $280 shipped. I'm taking it to a local place that was recommended by two car audio shops and I'll see what they say. It's only $15 to have it looked at so I'll see what they say. My budget for this is blown ...

Well, sending it in to Phoenix Gold is out of the question. I am not going to pay $135 + another $25 to ship it so $160 to get an amp replaced that is worth $200. I will have to try to find another one or get this one repaired locally. You say there doesn't look like there is anything wrong but don'...

I think this image might have still been uploading when you were looking at the images. This can't be good....? http://cube3design.com/rob/blown_x12001/CIMG0639.JPG I was running it at 4 ohm. My step brother had my car for 3 weeks and he is a bass head and used to ported subs and I think he might ha...

Pics coming right up. I think I found the problem area. You can really get a good look at this stuff with a nice high res camera. I think I will need someone to service it for me. I wouldn't even know where to source the parts and I dunno if I can solder on something that small. The pics are really ...

Hey guys, I took a road trip this weekend and had just put in my X1200.1. It sounded great all the way up and I set the gains with a DMM but I only set them to where the amps was putting out about 50v AC so I had it detuned a ways. On the way home, the amp went into protect when I was listening at b...

Great pics man!! I would have loved to do something like that, but alas this is the girlfriend's rig and this was all I could talk her into. I also will be putting the sub up on the fender like that, but on the opposite side. The amp will go on the passenger side because there are more panel covers...

Bfowler wrote:02bluesuperroo nice art series.

also, check out the "project maxima" in the install section to see the ti12 you sold me being put to good use

edit...duh...i just realized i bought it from ZAscooby. you both have Subaru's! easy mistake!

I has an 07 FJ now!

If this is really going to cause failure how come sooooo many people run this way without issue AND most manufacturers recommend this type of setup with their 4-channel amps? I can understand that this scenario is possible but I don't think it's all that likely or we'd be seeing many many more failu...

Dunno if you've seen this, nor if you care. At least you can see what to expect. Let me know if you have any questions about pulling stuffs apart or anything. http://www.diymobileaudio.com/forum/showthread.php?t=19513 Edit: And yes, the thing seems to rattle like a bitch. I deadened but I didn't do ...

Some of you may have seen by thread at DIYMA here: http://www.diymobileaudio.com/forum/showthread.php?t=19513 Here is my basic system setup: http://www.cube3design.com/rob/sys_design.jpg Last night I hooked up my sub amp and since this time it won't be running through the DCX-730, I'm back to my old...

The voltage at the deck has very little to do with the voltage at the amps. You would want to check the voltage at the amp.

With that being said, you shouldn't experience much voltage drop from the battery to the amps.

Although the sub sounds great in the recommended enclsure size, it sounds much much better in a 1.8 cu. ft. box.

I would snag this one if I were you. Seems like a VERY good deal. http://cgi.ebay.com/Velleman-Oscilloscope-H7105G-handheld-oscilliscope_W0QQitemZ230103884301QQcategoryZ104247QQssPageNameZWDVWQQrdZ1QQcmdZViewItem There is also this one which is very cool but more expensive: http://cgi.ebay.com/Velle...

This is a PM that I sent to the seller of this amp today. Explains the problem I had, as well as apologizes to the seller for my mistake. Thanks to those of you that helped clear up the problem. Turns out, I was just afraid to crank the gain as high as it needed to go. Rob I'm really sorry to keep y...

it may seem expensive, but the customer service has always been amazing. they have always called me to talk about the problem i was experiencing and walked me though parts of their process. TWICE on amps they have given me new cases when mine were beat up. and once the repairer saw my ship to addre...