Contact them at this number on their website?

Phoenix Gold
9300 North Decatur St.
Portland, OR 97203
Tel: 503.286.9300 • 800.950.1449
Fax: 503.978.3380

Do any of you know how I would go by getting a replacement knob? Not the lpl 44 but the bass cube knob with the frequency knob and volume knob.

Thanks

Im thinking of keeping my ti elite tweets and getting the passive and would like to find a set of the ti-elite mids, but if not, which 4 ohm morel woofer is it comparible to?

I couldnt use a port. I just dont have enough space so I'm going witha sealed 12. If anyone wants the TI 10, let me know.

Thanks for the informative reposnses. Unfortunatly, the box is already made and quite an odd shape. I have only 1 ft to work with. A slot port is not an option.

I also have a soundstream reference 10 that Im considering using. I will play around with winisd or possibly consider a sealed 12.

Well I have it in a .75 cubic foot sealed box and as of now, Im not happy with the output at all. In all fairness, I do have to let it break in but so far. I dont think the sub is a keeper. Why did I sell my Audiomobile MASS? Here it is in its temporary home while I consider keeping it for a ported ...

I went with a slightly larger box in order to fit 3" tubing to achieve the same tuning frequency. I highly recommend you do this as well, if you go ported. In my car I never did like them ported all that much. They got louder than all hell, but there was a lot of delay in the bass, and the woo...

Maybe you guys can hep me out as you seem to have some experience with this woofer. Designing the ported box: As shown here ftp://208.187.38.55/Phoenix_Gold/Man...ers_manual.pdf PG recommends 1.0 cubic foot 2”port 9.5” long which resuts in a tuning of 28.5 hz. Sounds good and all but when you put it...

So the tinsel are too short for the throw of the cones. First I ever heard about this I will have to inspect my three pairs I own. I have never had any issues with the two that have been in my truck for three years now, But thanks for the heads-up I will check all of mine tomorrow. On a side note m...

I have a pair of these in a blowthrough in my small truck. I also run a 3way upfront and have to greatly turn the subs down to blend smoothly in the 60-70hz range. As for SQ subs, not really. These subs dont have an extraordinary low end but they do wang around the 70 range. Haven't tried these por...

So is it a shotty solder connection or is the tinsel just too short?

Good to hear. Do you have any links to reviews or problem issues? Also would you consider these sq based subs? Considering the box is properly calcuated.

Hello forum. I just purchased this sub and will be building a 1 cuft ported box tuned to around 30hz. It will be getting about 375 watts. I dont know much about the sub except about how it modeled in winisd and specs. That 36 mm of xmax has to be overinflated. http://cgi.ebay.com/ws/eBayISAPI.dll?Vi...