dbjury wrote:I'll have it if sale falls through! Cheers.

Sorry sold it locally for $200. Thank you though.

kg1961 wrote:its a og second gen still has the master and slave
first ones had a diifernt speaker terminal
best of luck with the sale

Cool thanks!

Looks like an original one. Thanks Todd. I have a guy locally who is going to give me $200 for it. If that falls through I was going to ask $225 shipped. It hasn't been recapped and it has some nicks on one of the sides plus the bottom plate has normal scratches. It works perfectly. I have owned tw...

Is this the Tenth Anniversary edition or the original or what? Somebody school me!

Hooked the amp up in my car and it does the same thing with the red light. I ran it for probably an hour to my XMAX 12" and it worked like a champ (about a half hour with the red light on and about a half hour with the red light off). I noticed no difference in sound either way. Strange becaus...

Hooked the amp up in my car and it does the same thing with the red light. I ran it for probably an hour to my XMAX 12" and it worked like a champ (about a half hour with the red light on and about a half hour with the red light off). I noticed no difference in sound either way. Strange because...

I put the screw with the plastic washer in where the blue arrow is in the pic above and I could see a small gold trace that would be touched by the metal washer in this spot which tells me why there is a plastic washer on this screw and this is where it's supposed to be. Hooked it up, works like a c...

Very hard to guess but maybe in a hole where it needs to be above the trace so not to ground it. Exactly. Last I remember it was one of the screws in a heatsink section. That's also what I was thinking, so it don't get grounded. That's my obvious concern as to why one has a plastic washer below the...

IsakAlexander wrote:It were probably located at the spot where there is no mark in the gold trace.

Yeah I was thinking that as well but they all show signs of having screws put on them.

I took this ZPA 0.5 apart just to check out the heat sink compound because this amp has been sitting for a year and I was putting it back together and I noticed that one of the 9 screws I have pictured has a plastic washer below the metal washer, whereas the other exact 8 screws don't have that plas...

I also read the pdf file for the zpa 0.5 and it is in the grounded position when the red light comes on which tells me my rca jacks on my cd player aren't grounded I guess since I'm using a power supply. In the floating position is when the red light never comes on. I will hook it up in my car some...

I also read the pdf file for the zpa 0.5 and it is in the grounded position when the red light comes on which tells me my rca jacks on my cd player aren't grounded I guess since I'm using a power supply. In the floating position is when the red light never comes on. I will hook it up in my car somet...

In your top photo, the amp on the left is a V2 ZPA, and the amp on the right is a V1. PG removed the float switch, and changed the fans, plus some more items when they switched from V1 to V2. The grommet is not factory, as far as I can tell (I have never seen it on either V1 or V2 versions) Ok cool...

In your top photo, the amp on the left is a V2 ZPA, and the amp on the right is a V1. PG removed the float switch, and changed the fans, plus some more items when they switched from V1 to V2. The grommet is not factory, as far as I can tell (I have never seen it on either V1 or V2 versions) Ok cool...

looks like the old caps were leaking pretty badly prior to replacement. Actually they weren't bad at all but I had some local idiot replace them and he got solder all over so I then sent the amp to a guy on here named Alecs and he replaced them properly. What you're seeing is a bunch of solder over...

In your top photo, the amp on the left is a V2 ZPA, and the amp on the right is a V1. PG removed the float switch, and changed the fans, plus some more items when they switched from V1 to V2. The grommet is not factory, as far as I can tell (I have never seen it on either V1 or V2 versions) Ok cool...

Ok, I have 2 matching ZPA 0.5 amps (well sorta) and they both have the green toroids but one of them has a switch and the other does not. It says "Floating" above the switch and I was wondering exactly what this switch does. I can see where a switch could be on the one that doesn't have th...

A few pieces of PG gear I sold over the years that I should have kept

3 ZPA 0.5's and 1 ZPA 0.3, 2 have the high pass/low pass crossover cards and 2 have the bypass/full range cards

Here is my amp that needs repaired. The wires that go to the ground mechanism where you put the screw at that holds the plexi top on also needs put back on but obviously not a big deal. As you can see it looks like 2 resistors are bad and that is on the channel that has no output. That bag next to t...

I charge depending on the work required to repair the amp. If you issue is something simple, it could be as low as $25. If it were really complex and the amp needed a lot of parts, it could be $100. Does your amp blow fuses at all? ZPA 0.5 doesn't have any fuses in the actual amp unless you wanted ...

Matt’s ZPA amplifier is a big mess. He purchased them in non-working condition then tried to repair them locally and after the local “repair attempt” he sent it to us. First thing we did was try to undo the previous repairs and then fix it, it usually takes between 3-4hrs. Last time we charged him ...

todd217 wrote:When it comes to reputable I only know of 2 valeks1 and Eric.

Do you know Eric's id? Do you know how much his repair fee is?

Looking for a reputable and reasonable repair guy to fix the channel out on one of my ZPA 0.5 amps. One channel works perfect and the other channel has no output. I also have new caps for it I need installed. The 2 red LED lights on the board don't light up on the side that's out. I had valeks1 (Ale...

I have a black 5 terminal connector that looks like it would work on that amp. Might be interested in a + and - plug though :colors: $50 on ebay :shock: :idiot: LOL yeah I seen that. For that price I could buy a broken small series VIII sometime and get both plugs and get whatever broken amp I boug...