I have one myself, just needs to be built in. When I bought it, I asked the guy if I can supply 2 amps with only 1 Powerstation. His answer was YES. But now when I'm reading trough the manual, I can't see anything about that. Does someone know if that is possible and what is the best option to do th...

Just picked up this really nice amp set.

Does anyone has manuals for the :

Phase Linear Kw 4.8 power supply
Phase Linear Kw 1.2 s
Phase Linear Kw 0.6 s

Would be very helpfull and thanks alot!

huh so it can be done?

because ( 2 ) m100 are identical and both have an input and output rca.

It's a SVC. 4ohm.

It's the Digital Designs 1508

So I can't connect it to 2 M100 amps?

I have a 8 inch Digital Design 500 watt rms, now it is just connected to one M100. But to get a more controlled subwoofer it's better to have it overpowerred.

What do you mean with SVC and DVC??

Is it possible to connect 2 Phoenix gold M100 amp together for one subwoofer?

So one M100 delivers 455 watt rms at 4ohm.
Then connect 2 M100 together then you get 910 watt rms?? is that correct and is it possible.?

yes you can use the Fluke for it.

But I have the ESP2 between my Headunit and M100 right now and it isn't doing anything??
the Epicenter does work.

I haven't got the system changed yet, as to your last post.

So how should I connect it if I use the subwoofer lead from the headunit?

mmm ok should change that and uhm...should I use the Subwoofer lead from the headunit ?

and how should i use the O-scope then?
and will the Esp2 work? because it should drive the speakers and not the subwoofer.


And why is het better to connect the amps like this way?

At which frequenties are you testing? I got the audiocontrol test drive kit. It's one box with the Epicenter an ESP2 connected together. I just connected it to my amp and WOW, it's on my subamp. And the powefull bass is back and my amp isn't clipping. But the ESP2 should not be connected to the sub ...

And what about my Epicenter and ESP2, how can I use it in my system because one M50 is used for the left(rear) channel and the other for the right(front) channel.

One other thing, since I got my Sub amp oscoped....my sub is less powerfull. It's only playing a little when the volume level is at max. I oscoped it as follows: First see when the deck is clipping, set the subwoofer level on the deck at max. then my deck is clipping at 31 out of 35. But my speakers...

dwnrodeo wrote:I have a Kenwood X994 and with the O-Scope it starts clipping at 31 out of 35.

What frequentie do you use? and I how much db is it recorded?

ok will do.

If that is the case, which headunit will you advise ?
( I saw a pioneer p90rs and a real nice Mcintosh headunit.

And I'm also planning of buying a PG ms2250 team edition ( fan cooled ) for the subwoofer.
and then use the M100 for the speakers..

Good choice?

Eric D wrote:Something is wrong with your configuration. That head unit does not clip.

Check treble control, bass control, loudness, or any other possible feature you may have on. If you have the DSP enabled, it will clip exactly as you mention, so maybe that is still on.

DSP is off and internal Amp is off.

Got my Headunit oscoped and it's clipping at volume 25 out of 35, with signal 1000hz at 0db record. Then I got my amps oscoped and set all gains propperly. For the subwoofer I used a 40Hz signal at 0db For the speaker composet I used 1000Hz at 0db Specs of the composet: Subwoofer : ?? don't know exa...

Ok eric I will read trough the manual.

So set my headunit to DSP bypass and internal Amp on Bypass, right?

But then I can't use time alignment anymore...

Eric, I switched off my preamp of the headunit. Do I have to switch it back on? I do have an oscilloscope myself, But i some way it only works for midrange and tweeters. For the subwoofer I just can turn my gain up and see nothing clipping. (weird right?) So I think I do something wrong for my subwo...

Thanks alot Eric. The subwoofer sounds wayyy more powerfull then before ( the gain set on half ) Only the speakers are not so powerfull Speakers 140rms Got them bridged at M50 ( 1x 200 rms) Gain is set on half. The manual of the M100 says you sould set the gain just before clipping. Do i get a bette...

I almost there. Thanks Eric. The subwoofer now sounds wayyyy more powerfull then before. Only the speakers are not that powerfull. The speakers are 140rms M50 is 200 rms. So should be perfect. The gain on all amps are on half. Also the gain on the M100 is on half. I didn't set the gain of the M100 t...

Yes I do. I have the : Morel passive crossover Phoenix gold Xvr4 crossover Fanatic xr3 pro crossover. So your suggesting: 1 M50 bridged 1x200watt rms. then use passive crossover and connect 1 kick speaker and 1 tweeter to it. (left side) The otherone the same only for the right side. But then I don'...

so if I use the M50's for the kick speakers bridged. How do I connect my tweeters then?

Or if you mean it like this:

1 M50 4ohm, connect 2 morel speakers of 4 ohm bridged (got 2 ohm)

but when I bridge my M50 they are at 4ohm. But my speakers become 2ohm.. , right?

and how sould I set the crossover for the tweeters? ( on my headunit the front and rear have a max. of 250 Hz HPF )
and on my M100 it's max. 500Hz HPF?

Ok, so I have decided to get my rear speakers out. Speaker specs: Morel Hybrid. 140watt rms 300 watt peak power M50 got 2x85rms M100 got 2x160rms So the M44 can also go out of the system. Then I got some option left: 1 ) M44 out and M50 in 2 ) M44 and M50 out and Outlaw in option 1: Then I can use 1...