I will find out for give me 3 hours

stipud wrote:What model is your headunit?

my headunit is alpine.

no pictures?

will do

http://pcclub.com/product_details.cfm?itemno=A0100382# http://pcclub.com/product_details.cfm?itemno=A0096025. http://www.newegg.com/Product/Product.aspx?Item=N82E16835150007 Those are the ones i'm looking at so far. No computer stores really around where i'm at that would be cheap. Any of those you...

The print on the box says 10/10d, but there should be a sticker somewhere on the box that specifies which version it is. did you look for this sticker? did you ever determine whether the voices were coming from your rear speakers or the subs? you can try fading the cd player to the front to get a b...

Bfowler wrote:sorry, didnt see the part about the lp switch. i only saw the freqency dial.

ok so i think i did everything everyone said on the thred.
any more suggjestions?

regardless of your VC config, i think we need to figure out at this point why your ar still getting hoghpass signal through them there is a switch on the same side of your amp as the RCA's go into. that should be set in the middle. No other processors in line with amp? No crossover (xover) on the h...

The print on the box says both 10 & 10d, but there should be a sticker somewhere on the box that specifies which version it is. Regardless of which subs you have that amp is pretty small for a pair of them and is playing a big part in the limited output you're experiencing. It's irrelevant that...

i think its a duel voice code

i cant tell which one it is

the modeel of the sub is 10/10d thats what it says on the box? it also says 4ohms. and btw And from the diagram it shows that the 2 subs are bridge into 1 wire and into the amp is that what I need to do? Because my amp has 2+ ports and 2- ports for output or what ever and I wired 1 sub to each so th...

http://www.phoenixgold.com/2004/wiringtutorial.html is mine a 2ohm or 4ohm? I'm not sure. And from the diagram it shows that the 2 subs are bridge into 1 wire and into the amp is that what I need to do? Because my amp has 2+ ports and 2- ports for output or what ever and I wired 1 sub to each so tha...

No other processors in line with amp? No crossover (xover) on the head unit? If so then- Make sure the crossover configuration switch is set to LP look at this manual for the pic. Turn the xover frequency dial up or down to about 10 to 11 o'clock. See if this helps any. http://download.phoenixphoru...

Your LP or low pass crossover point. Is what filters or limits what signal reach the speakers. Let's start with this: what exact model # amp do you have? Once we establish this then we (phorum members) will help walk you through this process of setting points and gains. I have a OCTANE-R 2.0:1 amp ...

AVICJR wrote:What are your crossover points? Disconnect the back speakers to find the problem(s) by process of elimination.

What do you mean by my crossover points, sorry I am a complete newbie at this, first setup ever done everything is wired really tightly and clean, thats all I know really.

I just brought a pair of 10" octane r's 500 watts each, bassworks sub box, and a 200watt octane r amp. And they don't seem to sound like subwoofers. They give off more bass but it seems like some vocals too, or maybe its my back speakers but one of my buddys have MTX's and they out do mine but ...