Thats awesome man, so what subs/amp set up you running now? I just see that 600 and 500.4
Also, still in the Audi?

Here are the complete specs on the sub. I couldn't find a spec sheet for the rsdc's. Ya, the Fi is a beast. It really puts out some bass for a single 10 sealed but I would like something to compare to in terms of SQ. SSD10 DUAL 1 | DUAL 2 Fs: 28.3 Hz | 27.6 Hz Re: 0.75 Ohms/coil | 1.5 Ohms/coil Qms:...

RSDC10? I keep reading all this good stuff about them and there pretty cheap on Ebay. I'm running a Fi Audio SSD10 now and it impresses me but hey, why not right? It would be in the same box, right around .5 sealed with a ti600 on it. Facing up in a truck. http://i236.photobucket.com/albums/ff299/ER...

Ehhh it was my fault. Operator error. I put an intake on my truck and un hooked the battery and didn't turn up the stereo for a few days and just forgot about the sub level going to 0 once the battery is un hooked.
Soo... My Ti's are still alive

Everything i've always read said to use 1/0 gauge when runing more than one battery and always upgrade your grounds under the hood to 1/0 with anything over 1000 watts rms. Leave your stock grounds there and just add a 1/0 wire from your battery - to the chassis and from that point to the engine blo...

Didn't check that yet but i'm sure its low.

My 600.2 has very little output. I checked everything, unplugged the LPL, turned the gain/bass all the way up and down a few times. It still works but there is very little output from the sub. I'm running it at 4ohms bridged. Any idea's?

Wow, 5K is pretty hight for the tweeters. I have mine at 3.2K at 24db. You could most likely run yours lower if you cross them at 24db.

I have the 9887 running active also but my Pro60's don't sound any different just have more tuning ability for my truck than with the passive crossovers. What settings are you at?

Also I would like to set my mids and tweeters gains using a dmm. I believe a 1K test tone for the mids but what about the tweeters? Maybe an 8K test tone?

I posted in another thread but i'm just going to make a new one.. I set the gain on my ti600 using a dmm and unless I turn the bass level on the amp up to about 1/3 there is very little output with music. Now, I know everyone on here says leave the bass level on the amp down all the way. Is it reall...

fuzzysnuggleduck wrote:The Alpine iPod cable is digital.

Yep, I use the Ipod cable that plugs into the ipod not the head phone jack. THe output isn't bad with some music. Even with most CD's I need to have the gain up all the way if the bass is down all the way on the amp. I guess I need a line driver.

I'm using the Alpine Ipod cable and there isn't an adjustment for that. It's fine with some songs but with most songs and even some CD's I have to turn the LPL up the entire way or close to it and have the gain turned up all the way. So at the moment I have the gain up all the way, bass down all the...

Man that really sucks. I feel like shit because of this. Is there anyone on here that can fix the amp? Or you have to send it to PG? Let me know.

Thanks for the quick reply and the help guys. There is one knob i left out though, it says XOVER FREQ 30 - 300, i have no idea what it does or what it should be set at. You want that set between 60-80. See where it sounds best to you and blends with your front speakers. I also have a question. If I...

Nice, how do you like the 9887? I love mine and didn't even get the Imprint yet.

Ok, I turned down the bass level on the amp and had to increase the gain to around 75-80%. Is it safe to have the gain turned up that high? I see the LPL still works also even know the bass is down the entire way on the amp.

So if I turn the bass level down the entire way on the amp is the LPL even going to work?

Also, I used a 50Hz test tone from a CD to set the gains but I mostly use my Ipod for music and the overall volume seems lower than with a CD which is why I had to turn up the gain/bass alittle more.

I don't see how the amp could be clipping. I have the gain at 60% and the bass at 50% and i'm using the LPL to control that on the 600.2 running at 4ohms bridged. I also have the gain set at 50% on the 500.4 which is running my tweeters at 8ohms stereo and my mids at 3ohms stereo. I never listen to ...

I had the amp on bypass because I use the crossover's in my head unit to run active.

If you can get the part from Wakeup let me know how much it is.

I'm using a Ti600 to power my sub and trying to figure out my dimming problems so just for the hell of it I tried the Ti400 on the sub to see if the dimming would still be there. I set everthing the same as I had it on the 600 and I couldn't tell a difference between the output of the 2 at all. Sho...

I swear I did not scam you or would I ever scam anyone because I know how it feels. Everything worked perfect on the amp. Did everything seem ok when you got it from UPS? This is how I had it in my truck..

Thanks again.

FuzzyHoNuts, I still have yet to use that block Dont have any room..

I checked it out. Seems solid. But its 18.25'' wide and thats going to be really hard to fit under my seat. There is one on Ebay now. I can get 10% off by midnight tonight. http://cgi.ebay.com/PHOENIX-GOLD-X600-1-XENON-MONO-CAR-AMP-CLASS-D-NEW_W0QQitemZ130226371777QQihZ003QQcategoryZ64570QQssPageNam...