Hi, need help with wich speaker terminals i use when im bridging the zpa.
I have read through the user manual but i cant find it, is it + on the left channel and - on the right?.

That sucks hope you find it one day

Thank you Alfaholic, waiting for next car to come from Odda, it would be more to see...lol Thats a long way from you but there is not many good innstalers in the west side of Norway there is a shop in Stavanger but they got high prices and not everybody is happy with the work they do, thank you for...

Very nice work i love that amp rack

^^^^^looks awesome and clean man!!!! Thanks,i hope i can hide the wires and move the bass cube up so i can get the amplifier closer to the wall i need the space because im planning a road trip to Europe in the summer and i need all the space i can get back there. With the zpa and zx on the floor i ...

Here are some pictures of the trunk i got to connect the tba to the audio control and bass cube and hide the wires, i think im going to guide the wires behind the board and make holes where they need to go so i still got much work but i think it be good when im done.

I think the concept series was meant to be a cheater amp, so it's rated 25x4 at 12.5volts. When you are up to 14 volts likes like triple the power. I don't want to tell you that it's ok to run it at 2 ohms mono, but I don't think you'll have any issues as long as you bridge it right. So this model ...

Another vote for the 0.3 on the fronts and the 400 or 600 to the sub. I think the sub is rated overall. I've never seen a sub rated per coil. Thanks for your reply its my first dual coil subwoofer so i was not sure how they are rated, im sorry to say i could not fit the zpa and zx in my trunk becau...

I got two lpl so i will make sure i use one on the sub channel, when it comes to the tba it is from the HU to the DQX and i hope it will help me with my noize problem im also going to put in a capacitor.
Thanks for all the input i will go for the all PG setup

thedeal7235 wrote:Phoenix ALL THE WAY, but I'm bias;p

I think that im going all Phoenix i can exchange the zpa0.3 with a zx600ti or 600titanium but the zpa sounds great on subwoofers, hope i can fit it all in the trunk lol

Tommorow im finaly start putting amplifiers in my car but im having problems finding out wich im going to use, im using a 6.5" component speaker in the front and 10" 4ohm dual coil subwoofer. I was thinking of using my Orion 97.1 concept (XTR475) because it got 4channel and then i can use ...

I will try and do that trickyricky, hope it does not require much repair and many parts like the harman kardon.

DC? anything above 0.5vdc should trigger the dc protection circuit. Yup, it tries starting up but the volt goes up on the sub channel and it goes in protect mode, i checked caps they have contact and the caps are mounted the right way. I changed all the fets and im waiting on the small smd resistor...

Well i tried to power it up and its still got problems, before it stayed in protect but now the power light goes on but then goes of and the amplifier goes in to protect it keeps on going from power to protect and i got 4-12v on the subwoofer channel. I think the problem is to much volt to the subwo...

The guy i bought the Orion concept amp and dsp got one of these Adcom amps he also got the pre amp/line driver but there is a problem with the amplifier. I got it for the cost of shipping and i onder if anyone got any knowledge about them, when where they made how they sound and how many were made e...

Hello, im just finished with changing all the fets and transistors and im putting the amp back together. There is a long slice of sillypad and some of the fets had cooling paste on them, my question is if i can use cooling paste on all the fets?. I always use some small spots of cooling paste unde t...

Yeah perhaps just the crossover boards are different but the boards are exactly the same. Am still trying to figure out how much the XTR475 goes for, I priced it at 300.00 @DIYMA and got a few interested buyers but yet to sale it. I think it funny that no one have seen this before i even see people...

I see that the x-over modules are different in the manual of the xtr475 the x-over dont match the 97.1 got the DVX2 boards i dont know what the xtr475 has but after what i see in the manual they are different.

I thought all the concept stuff was marked special edition. The DEQ I had years ago was IIRC none of the concept stuff i have ever seen said special edition on it. at least the ones that came into the shop didnt. The ones i find online all say special edition and edition but maybe there were two ty...

Got any gut pics? I can verify if its the same amp just different chassis...perhaps that's why its special edition, it has a brushed chrome finish. I did not take any gut pictures but i will open it up tommorow and post a picture of the writing on the board and the whole board, in what i have found...

I have a Orion xtr 475 for sale if interested let me know. That concept is in beautiful condition. The 97.1 has some marks here and there but not much im finished cleaning it and i tryed with paper under the caps and i cant find any leaks but maybe i will change the caps on it i not 100% sure yet, ...

If not at least you will have some nice wall art. Nice and expensive wall art lol, i know im going to get it to work its just a matter on what its going to cost but if i learn something new i dont care i have tested everything multiple times and everything seems to be ok.¨ On the sdt-ti r-link box ...

http://www.manualslib.com/manual/116289/Orion-150-Hcca.html#manual[/quote] I found that one but its not easy to see the pin layout on it, i see there is an original copy of the HCCA150 for sale on ebay maybe i will ask him about shipping to Norway :-) I tested the 97.1 yesterday it sound really good...

Looks nice and clean i like the caps they look good, why did you change the caps on the power supply boards were the old ones broken?.
What did the audio grade caps cost a piece?

I believe the din ports are for balanced cables like older pg tba set. Im pretty sure the cpu port is for exactly a cpu hook for tuning or software updates just the the pg tideq Thank you i will try and get the cables for it then, does anyone know of a good copy of the hcca150 manual im trying to f...