Hey Guy's looking for feedback from current Elite.5 owner/dealer/installers on the sub section gain settings. What position on the gain you are set at to get the woofer excited? I'm not a bass head but I have to set my gain dial @ 12 O'clock to excite my JL 12W3-2 woofer. The signal is coming from a...

Kirghiz wrote:
Someone said this amp has a very "in your face" sound to it. That's pretty accurate.

That would be me!




.

I don't think this elite.5 amp will ever need a fan. I dont know if I will ever get my elite.4 fan to come on. Only one side of both amps has the little heat I mention above. The other side of the amps were at ambient temperature. The heatsink fins are below the circuit board. Take a look >>> http:/...

As for that 5 channels of FUNK........................... Last 6 seconds




Or







Is it live Or is it PG Elites




.

ttocs wrote:you can always swap out for a DVC sub to get more power out of it later if its not giving enough power, or try a bass cube.

On the remote, does that have a disconnect on the back of it or is it hard-wired out of it?

YES! RJ22 connector amp & remote.

Just keep in mind, its a 5 channel amp. And a very good sq amp at that. Take advantage of the power available. A good dv4 or dv2 sub is not that expensive. As far as running a single 4 ohm sub, i don't think many people would run a setup like that anyway. It was built to run optimally at 2 or 1 ohm...

Not what I wanted to hear... :? Cheer up. It is better with a 2ohms sub connected! The amp is without a doubt an ES CUE /SQ amplifier. It is as good, if not better than my Audison Voce AV5.1K. Unlike the Audison, the PG elites goes about is business with a whole lot less heat ! Morgan or Eric D can...

J.Wright wrote:I was hoping for more than that.... I'll be using a single 4ohm sub....

I can tell you right now its on the weak side with a 4ohms sub! I currently have a JL12w3v3-4 connected. I will update later today if I can get a 12w3v3-2 locally.

For all intents and purposes, it's really 2 amps. A 400 watt 4 channel Class A/B, and an 1100 watt mono class D. Couple that with the ridiculous SQ specs this thing has, it is hands down the best 5 channel on the planet, on paper at least. I was never a fan of five channel amps because usually they...

Elite.5 & Elite.4 installed over the weekend!!! They sound kinda Tru Technologish.











.

Morgan any reasons why Nichicon, Panasonic or Elna caps were not implemented in the elite amps?
The only brand part in the elite amps I would question is the CapXcon condensers. This from my PC building days http://www.badcaps.net/forum/showthread.php?p=39119.

I am here, just VERY busy at the moment working on new products for 2013. We have 12 new amplifiers and 9 new speakers/subs! Sit tight more news to come. I understand! I was surprised that you did not give any teaser on this amp. Anyway, I am happy to see an elite 5 channel amp. I plan on getting o...

justrob, is Morgan still with aamp? I have not seen any post from him latley.










.

Actual pictures here > http://www.diymobileaudio.com/forum/tec ... -week.html

So is this 5 channel amp available? Other than this thread I can't find any info on them. It is available! Look on the flyer, says shipping 1st week of December. More info here > http://www.diymobileaudio.com/forum/technical-advanced-car-audio-discussion/140899-phoenix-gold-elite-5-5-channel-shippi...

justrob wrote:Yes, it is the same size as the other amps in the Elite line.

When will it be up on the PG site?

ttocs wrote:nothin new...

YES!! The Elite.5 that most here did not want to happened. And I am getting me one.

Finally!

No offense to the new PG, but what I don't understand is the pricing.. Why have $1200+ amps powering $450 splits and $450 sub? To me, those won't scream "Elite" and available only to those who want a higher range than the current Ti's which down here (Australia) have the $450 pricetag (bo...

Eric, I understand this about the Elite series. But keep in mind what I said about newer vehicles & people not willing to give up space. They may be willing to pay the price for an Elite but want a one amp solution. There is also those of us who runs a full 3 way front active + rear fill & s...

I will disagree. I would have to say that my Audison LRx5.1k is the perfect all in one SQ machine. So a 5ch SQ amp can be made, the 5.1k is proof. I just want the PG name back in my ride/s. And for me, space is a factor, but SQ in the goal. If space is a factor, but SQ is the goal, you have to comp...

I would like to see another 7 ch amp. Like the ti900.7 So you would rather have have; Titanium 900.7 CENTER, FRONT and REAR CHANNELS Into 4 ohms @ 12.5 Vdc (IASCA/USAC) . . . . . . . . . .18 x 5 Into 4 ohms @ 14.4 Vdc . . . . . . . . . . . . . . . . . . . . . .50 x 5 Into 2 ohms @ 14.4 Vdc . . . . ...

Press release http://phoenixgold.com/images/pdfs/pressReleases/20120110_Phoenix%20Gold%20Elite-Series%20Release%20-%20CES.pdf Initially, Phoenix Gold is rolling out three Elite-Series amplifiers – the Elite.1, Elite.2 and Elite.4. These are some of the most powerful amplifiers Phoenix Gold has ever ...

Morgan, it looks very potent on the inside. But where is the 5 channel version?
An elite.4 & Elite.5 sure would be sweet! You have me running to uncle Larry for the Voce instead.


.

MW3 wrote:Elite.4 Gut Shot...

That is the same as the DEX-P1R, USA model

Haakon wrote:If you can stretch your timeline to 97-98, I have this sweet P99R laying around.. Upgrading to a P99RS for my new system