Ok, thanks for quick reply. So I guess I'll go for the Yellow Top first.
If the ICE affects my overall car after the Yellow Top, then I'll have to upgrade the Alternator.

I have the same 2 amps in my car, also in an SQ setup. I have done the big 3 upgrade, as well as upgrading my factory alternator to about double it's capacity (now 110A). I've also run 2G cabling from the battery to the trunk, and then used a fused Audison distro block to split the power cable betw...

Yup, that's wat I intend to do on the first place. But when the ICE installer told me that there's a possibility I would need to get a larger alternator due to the fact the Xenons are power hungry, made me worry shit. Anyway, thanks for the feedback, will stick the original idea, but will upgrade th...

So in other words, for purely SQ setup, I would need 4 ohm, right? Since I have 2 farad Cap, I would just add it to second set of terminal of the X200.4 even though it might be not be used too often unlike in a SPL setup. Well, my kind of setup mentioned earlier, would be ok, if the car is on the mo...

I'm going to have 1/0 gauge wire connected to the battery at the front, and pull it all the way to the back into a fused distributor block. From here 3sets of 4 gauge will be used to power up these 2 amps. 2sets to the X200.4, while the 1 set to the X600.1 Both amps groundings will be grounded to a ...

But i thought the manual stated that it should be used to connect to another amplifier?
It's used for extra power needed to feed into the amp.

Ic. Does the 1200.1 have 2 power input? Do you use both of them?

I use an x1200.1 and an x200.2 with the stock 70 amp alternator in my car with no problems. Of course I'm not trying to win SPL competitions with it, but it sounds good... On idle, does the sound seems ok?, I mean do you need to drive the alternator harder in order to get the proper sound quality? ...

icic...

So I better get a yellow top then as I know it's more for ICE setup.
Thanks.

I have this 2 amp now, and I want to get into active setup. I have done the BIG 3 wiring. The problem I'm facing is that my alternator is rated at 90amp. My ICE installer told me that I would need to upgrade my Alternator to a bigger Amp output to support this 2 amps. Is this true? Furthermore, I ca...

I have this amp.
Is it possible to run 200 watts X 2 Channels at 4 ohm, 400 watts X 1 (bridged) at 1 ohm?
I have one 6.5" Components and 10" dual coil subwoofer?

Thanks.

Wat abt using 100amp then? Will tat be ok?

Hi,

I know the recommended Fuse for this amp is 120AMP.

I have a spare 125AMP fuse, can it be used for the amp?
What's the PROs and CONs on this difference in 5amp?

Thanks.

Hi, I was thinking to get this PG X200.4 from ebay http://cgi.ebay.com/PHOENIX-GOLD-XENON-X200-4-4-CHANNEL-800W-AMPLIFIER-AMP_W0QQitemZ300274825339QQcmdZViewItemQQptZCar_Amplifiers?hash=item300274825339&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318 or http://cgi.e...

Hi,

I'm new here.