Okay Thank you all for your help..

But the manual states not to go higher than an 80. Wouldnt I damage the amp?. Should I first change my power wire to 0/1. first? To see if it fixes my problem.? The change to higher fuse.

Im just wondering if my tripath chip is faulty? Does anyone know if my tripath chip is done?. Will the amp still work if the chip is damaged? I think im going to upgrade my power wire to 0/1 .

Anyone can tell me what amp is much better in RMS. It looks as if maybe the tantrum is not pushing enuff watts. I am currently running a single JL 13.5/W-7 off of the tantrum 1200 amp. BUt it seems like its maybe not stable at 3 ohms. As when i slam it hard my fuse (80) thats connected to my battery...

Ya no line driver.. I see what you mean get a 0/2 gauge wire 120 -150 amp fuse off the battery to the distrubution block with 4 gauge to the amps w/80 fuse to the amps. So turn the bass to zero..kay I'll try that, that sounds good, after all that i dont need a power cap? Any other suggestions out th...

the run from my battery to my backseat of my toyota tundra extracab is about 7 feet. That wire is a 4 gauge. I have not measured my amp output with a dmm? I really dont know too much about this stuff, but just a little. I have the gain set to 75% of the way, should i back it down to at least 50%? Th...

I forgot to mention I have a clarion eq hooked up as well. I dont know where the grounds are connected because it was hooked up from a proffesional shop. But obviously not professional enuff. THey also mentioned that i should just get a second battery put it close to the amp and zero gauge. What are...

I have two separate wires. The 1200 has a 4 gauge with 80 fuse and the 600 has 6 gauge with 60 fuse, BOTH going straight to the battery. So each amp had its own wire and fuse. Thge only amp fuse blowing is the 1200. I thought I should change power wires to a 0?. Grounds are cherry as i have no noise.

Can anyone tell me if the Tantrum 1200.1 can go down to two ohms. Im currently running the tantrum 1200.1 and a single 12" RF power hx2 in a ported box. I dont think the tantrum has enough power to push it?. When I turn it up I hear this spurt coming from the speaker. Any suggestions or comment...