Cool!!, is this Rob?

Like the title says, one of my RSDC 10" subs has the cone separating from the rubber surround- any suggestions for glue? I've used rubber cement before on 6.5s where rubber surround has separated, but wondering if there is a " thinner" glue suggestion, since people see your subs when ...

Ive run my fronts(6.5 w/tweet w/ my rears on front chan., while keeping rear bridged to my subs, sounds good, just curious keep the rear 6'a( rear fill) in stereo on same rear chan bridged

Thanx Dereck, tried to message u on ytube( phoenixgold1234), can u please dyno a ti500.4, or zx 450 bridged at 2ohms? I swear my ti 500.4 bridged rear on my 2ohm subs has MORE output than 300rms- thanx in advance- Christian

Hey guys, sorry to ask, i know have before- but here goes, i know the tri-mode usually means front 2 chan. In stereo, rear bridged, but with the power supplies able to do 1ohm stereo, what if I ran my rear 6s in stereo on rear channel and simulataneously run my subs bridged off that channel? Wouldnt...

Those will work:) please pm me

Will do & thank u!!!!!

its pretty micro-the via pads/holes on the ti led-and yes of course i will try it if no one has any spare boards around-i had about 3 i bought from PG when they were still in Portland; sadly i used those boards to put tri leds in ti amps i bought, had no leds, and have since sold, so i know they exi...

hoping someone has a extra ti led board; i may of desoldered one of my via pads, while sucking out the old solder to replace my tri leds -leds will be here Friday -thanx in advance-

I bought a Ti 400.2 from Jeff, and received it today (friday in central Florida from Jeff in Wis. who mailed on Wednesday) and I couldnt be more pleased!!! The amp looks like NEW!!!!! I wish I couldve gotten one of his ti 4 channels before they sold- I cant hook amp up right now because the leather ...

thanx man, i have 8 volts from sld44(2nd set of rca output to the rear of the amp)set at 8volts going into the amp(measured in ac volts with a dmm), and the gain, and i never use bass boost, set to zero. Thats why im sitting here scratchin my head :doh: , as to how in the world is it actually readin...

dwnrodeo, can u please post some pics of this amp in ur car???? id luv to c it, thanx, C

Hey guys, I hate to ask, "what seems like a dumb question", but i must- Ive gotten rid of all of my "d" mono sub amps- I really enjoy the sound i get from bridging my rear ti 500.4 to my 2 rsdc10" 2 ohm subs- when i put a 60 hz sine wave test tone at 0 db in, and measure bef...

i LOVE that it is 1 ohm stereo!!!!!!!!!!!!! i cant wait to get one of these 4 channel once released, i will bridge the rear half to my subs( ive dont that soo many times on my ti500.4, and am ALWAYS impressed of the output at 2 ohm bridged since my subs are 2ohm dvcs wired series parr.) All 4 channe...

Morgan, I am considering the 4 channel, they will be out in 2 months, correct? And, the retail is $1200, correct? Since I live in Orlando area, I would like to pick up directly from you guys, let me know, and great job, Christian

I like the small"needle nose" you use with one hand, while using other hand with iron. I think, from experience, theres NEVER too many tutorials on cap replacement- thanx for sharing!!!:)

forgot-ti500.4 input caps are at 16volts

A month ago I got this ti500.4 from a local guy, and the tri leds were out, well, while in there I noticed the rail volt caps ready to bursts-(btw, Thanks valeks, you gave me the correct size 25mm by 22mm @ 50 volts 2200uf)-anyways Eric was right, only 1 was about to bursts, the other 3 were okay af...

http://www.newark.com/illinois-capacito ... dp/69K8230

these seem correct? 35.5mm by 18mm diameter, 2200uf 50v, rohs complient? sorry guys, its been a while, and if i recal there is something about the minus side?(that is the negative lead?) thanks again guys

excellent ideas; ive lost more "pads" on zx450s then any other models, but to be fair, since i spent the 20bux on the cheap radio shack "desoldering" iron(has a bulb u suck old solder up with) ive had no issues- i even replaced tri leds earlier today on a ti500.4, used that desol...

hey guys, been a while, anyways i bought a used ti 500.4, and looked at the rail volt caps upon replacing the burnt out tri-leds- and they are about to burst(probably worst ive ever seen) well, i forgot to measure them and look at the volts/farad/height-any help would b appreciated so i can order fo...

forgot to mention, the mesh installed behind the sd amps, even in the pics, looked very HOT! they really did a great job on the installs, etc.-(wanted to hear the sd amps, but they mentioned ,since the porsche was right next to the scion w/ti 2 subs+"THE ONE", it wouldve been difficult-to ...

sorry i didnt take video, dont think the sound wouldve translated properly thru my htc incredible, but it was ALOT of pressure, and they sounded P-R-E-C-I-S-E!!!!!!!!!!!!!!!!!!! Nick, commented, if u luv the rsdcs, these are even better improvement upon them, and i beleive thats the case!!!!!!!!!!!!...

Thanx joerg! Christian

15bux