Search found 1174 matches
- Sat May 10, 2008 9:53 am
- Forum: Car Audio
- Topic: Bass Cube Remotes
- Replies: 219
- Views: 145376
Okay, here is the list as of right now. If I missed you somehow, let me know and I will add you on. pnyryd May 02, 2008 5:36 am – 3 Remotes marko May 02, 2008 9:30 am – 1 Remote Irongoats May 02, 2008 4:37 pm – 1 Remote denim May 02, 2008 5:06 pm – 1 Remote Wakeup May 09, 2008 8:48 am – 1 Remote Che...
- Sat May 10, 2008 9:41 am
- Forum: Car Audio
- Topic: Bass Cube Remotes
- Replies: 219
- Views: 145376
As long as you are willing to pay shipping, I am willing to ship. I am still waiting on the broken Ta1200.1, but it should be here early this next week. I already have the numerical code generated for the PCB's. If life treats me well on my two days off, I will try to route one with the mill to get ...
- Sat May 10, 2008 9:36 am
- Forum: Car Audio
- Topic: Custom M100/M44 Idea tank
- Replies: 3
- Views: 1724
Hmmmm... The idea sucks that bad then? Seriously, I won't get all butt hurt if you guys tell me it sucks. I want to hear honest advise before I go further. On a side note, I got my sheet of aluminum yesterday. Holy shit, the price went out the roof and took the damn ceiling with it. About 2 years ag...
- Fri May 09, 2008 5:17 am
- Forum: Car Audio
- Topic: Custom M100/M44 Idea tank
- Replies: 3
- Views: 1724
Custom M100/M44 Idea tank
I am starting this thread mainly to post my Acad drawings of my proposed Super Amp. I know others have done similar things. I know Fuzzyhonutz has a interesting plan in mind for some as well. I want you all to share your opinions on my design as I go, to make sure I don't make any mistakes I will re...
- Thu May 08, 2008 3:29 am
- Forum: Car Audio
- Topic: Thought you guys might like this.
- Replies: 53
- Views: 15475
- Wed May 07, 2008 5:22 pm
- Forum: Car Audio
- Topic: Thought you guys might like this.
- Replies: 53
- Views: 15475
Sorry for the long delay in reply. I have been pretty busy with work. I would love to have some good scans or pictures of the M100 and M44 silk screening. Post up any logos and I will try to vectorize them as I have time. If any one wants the .dfx's for their own use for vinyl, silkscreen, or machin...
- Wed May 07, 2008 7:54 am
- Forum: Car Audio
- Topic: How much were they retailed for ?
- Replies: 23
- Views: 10957
I paid somewhere around $750 for a ZX500 brand new in '96(ish)I bought several through their production years, and I think the lest I ever got one for was $599. I had four or five ZX500's at one point, and a couple of ZX450's. Both were in the same price range. I remember in '96 or so one shop had a...
- Mon May 05, 2008 2:41 pm
- Forum: Car Audio
- Topic: Thought you guys might like this.
- Replies: 53
- Views: 15475
Thanks guys! Like I said, the M100 Case I have is plain white now that I scrapped the blasphemous kicker sticker off of it. I may strip it, and engrave and repaint it. I may have to hit someone up for high resolution images of the M series covers. It takes a lot of time to vectorize the image, even ...
- Mon May 05, 2008 11:20 am
- Forum: Car Audio
- Topic: Thought you guys might like this.
- Replies: 53
- Views: 15475
Got your PM, I will try to reply later, I am at work right now w/ limited time to be online. Long story short, Let me do my own M100/M44 case and see if you like the results. In my case, the case will be all new and custom made by myself, so if it sucks, it is no big deal. I wouldn't even think abou...
- Mon May 05, 2008 7:50 am
- Forum: Car Audio
- Topic: Thought you guys might like this.
- Replies: 53
- Views: 15475
That metal piece looks curved. Was that done before or after the engraving? In other words, can you engrave on non-flat surfaces? It is just 16g aluminum sheet I had kicking around the shop. It is slightly curved because of the way it was stored. I tried very hard to get it held down for the engrav...
- Sun May 04, 2008 5:00 pm
- Forum: Car Audio
- Topic: Thought you guys might like this.
- Replies: 53
- Views: 15475
- Sun May 04, 2008 4:36 pm
- Forum: Car Audio
- Topic: Thought you guys might like this.
- Replies: 53
- Views: 15475
Thought you guys might like this.
I spent some time screwing with my CNC mill today. Engraved an O/S PG logo in aluminum, and in plexi. I didn't have any proper engraving cutters, so I just gave it a shot with an old drill. Came out pretty good, the plexi was just a piece of scrap, but I think I am going ot engrave some in thicker p...
- Sat May 03, 2008 8:38 am
- Forum: Car Audio
- Topic: Bass Cube Remotes
- Replies: 219
- Views: 145376
Nico, Thank you. I don't have any issue with testing my board once complete, though. A few extra bucks if the pot is wrong won't be a big deal to me. So, if you don't feel comfortable de-soldering the potentiometer, then don't worry about it. Thanks again guys. BTW, I have plenty of responses via PM...
- Sat May 03, 2008 1:15 am
- Forum: Car Audio
- Topic: Bass Cube Remotes
- Replies: 219
- Views: 145376
Thanks, but upon looking further, it isn't going to work with it connected to the board. VR1, R1 and R2 are series in parallel with those terminals as well. Do you happen to know where the volume pot was set? If it were set at is maximum resistance, I should be able to calculate the resistance of th...
- Fri May 02, 2008 4:48 pm
- Forum: Car Audio
- Topic: Bass Cube Remotes
- Replies: 219
- Views: 145376
Thanks guys! You guys fill a huge gap with the phorum as well. I am glad I found this place. I will do whatever I can to help out. Lets try to keep this thread toward the top for a week or so to get a head count. After my broken Tantrum 1200.1 I bought from Wakeup comes, I will order what parts I ne...
- Fri May 02, 2008 1:03 am
- Forum: Car Audio
- Topic: Bass Cube Remotes
- Replies: 219
- Views: 145376
Okay, I got all of the components figured out. Things will be a tiny bit different than the original remotes, namely in that the freq. adjust pot shaft will not be removable. I doubt any of you actually want to remove it, and although I can get those pots, they are about 6x the cost of a normal one....
- Fri May 02, 2008 12:29 am
- Forum: Car Audio
- Topic: Bass Cube Remote Pics for my peeps.
- Replies: 25
- Views: 9105
- Thu May 01, 2008 5:14 pm
- Forum: Car Audio
- Topic: Bass Cube Remote Pics for my peeps.
- Replies: 25
- Views: 9105
BF, the volume pot, if you haven't shipped it yet, can you tell me what the name or numbers are that are stamped on the top of the switch section? You can just see they are there in picture DSCN0187.jpg, but can't make them out, all of the other pictures of the top have too much reflection to read. ...
- Thu May 01, 2008 1:21 pm
- Forum: Car Audio
- Topic: Bass Cube Remote Pics for my peeps.
- Replies: 25
- Views: 9105
No, not unless they are labeled as such. You can check with a meter though if you get ambitious. Linear taper will measure from 0-10k ohms evenly over the whole range of the pot. Audio taper is a logarithmic curve that increases from 0-10k. A linear pot would be about half of it's rated value at hal...
- Thu May 01, 2008 12:13 pm
- Forum: Car Audio
- Topic: Bass Cube Remote Pics for my peeps.
- Replies: 25
- Views: 9105
- Wed Apr 30, 2008 5:47 pm
- Forum: Lounge
- Topic: I finally got the CNC mill running!!!!
- Replies: 5
- Views: 2337
Do you have the software to upload cad drawings? Yes and no. The software I am using for a machine controller is called Mach3. It supports importing of .dfx files and will allow you to enter your cutter diameter and feedrates and stuff and will cut one dfx layer at a time, at varying depths if you ...
- Tue Apr 29, 2008 11:24 pm
- Forum: Lounge
- Topic: I finally got the CNC mill running!!!!
- Replies: 5
- Views: 2337
I finally got the CNC mill running!!!!
Whooooohoooo! It has been a long drawn out process. I have about a month and a half of all of my free time wrapped up in it. Dragged it home for $500, sunk about another $1500 into it retrofitting it to PC based controls. It made it's first cuts in my shop on Monday. I still have some tuning and wor...
- Sun Apr 27, 2008 7:40 am
- Forum: Car Audio
- Topic: This ought to be loud...
- Replies: 9
- Views: 4165
Yeah, I miss getting loud too. I find in my old age (Turned 30 last august) that I will hear some snotty kid go boomin' down the road, and think, I wish he'd turn that crap down, he's gonna wake my kids... I don't typically have the bass cranked non stop like I did when I was a kid. My current syste...