Thanks for the advice guys, i love that amp rack Renovatio i will try to put the cabels through the back seat plate and in to the amp rack i want to have the front like a door so i can open it easy if i need to ajust the amps. I will train with the router before i cut the things im using in the car,...

I have to take the panels of because i will use a tripple shielded rca i will also need juice to the processor but i think i will take from rear light and use a relay and use that for all my remote cabels. I think i will mount the amplifieres and proccessor in a box with two fans, i want to mount th...

I have started making wires for everything i need like remote wires and rca, i have bought wire stocking and holders for the wires

THUMP-LUMP wrote:Yea. Stick with the sealed 25liter box and the Focal.

Just orderd it now and i got it at the same price as the Redline 210 on it so i saved 50$

Between the Digital Designs and the Focal, both in a 25 liter sealed box, they are almost identical. I doubt you would hear a difference. The Focal with dual voice coils will give some options but, no change in box design. I found out that if i use focal 27V1 i can use a open box and tune it to 33H...

OK......Just for reference, I compared your sub and 25liter enclosure size (YELLOW trace) to what I run (BLUE trace). I think you'll be OK. My old school Orion XTR10 are better off in a ported enclosure but, I prefer them sealed (less boom). You choice in fill will be OK as well. I prefer Polyester...

What do i use inside the enclosure i bought some soft foam with bumps today is that good enough?.

I see you're starting to figure out WINisd. Also note that you can change the box size and port tuning freq. and see what it does to the output on the graph. If it were me, I would probably go with a sealed enclosure. Other wise, you will also have to give up room in the box for the port. You can a...

Try contacting Jason at mobileenclosures.com $40 for a set of plans to what you need. I done several designs of his now. You wont be disapointed. I think its better for me to find a subwoofer that fits the box im using i have already bought the box and i want to have it in my spare wheel compartmen...

What size box do you have now? I can tell you how it will do in there. Also.......what kind of sound do you want? Tight and accurate? Boomy? Or just a good compromise. The box is 25Liters or 6,6us gallons, i want sound quality im not after big and loud just nice and clean sound. Thanks again :-)

Fs 37.01 hz Qts .692 Vas 1.116 ft^3 These are the only specs you need to calc a ported or sealed enclosure. I'll enter them in my version of WINisd and let you know what I get later today. Okay thank you vey much, can you chech what box it should have vented and sealed, and what i "lose" ...

I dont understand the graphs on win isd and i do not got all the specs of the woofer filled in as they are not listed in dd audio site, i tryed to post but they are in bmp files. I need something that tells me if i can mount them vented in a small box like im using im hopeless with these things and ...

dd has very good box designs right on their website. i have yet to go wrong with one of them. by the way, none of the dd subs are recommended in a sealed enclosure. if that's your only choice maybe research another brand. not saying it wont work sealed but its not recommended. That sucks they state...

I just orderd a Digital design audio redline 210 subwoofer its one 10", i got the specs but i cant calculate what size box i would need for it and i need help :oops: I wanted to do ported box but i using a precut round box to the spare wheel and its from 11-30 Liter or 2,9-7,9 gallons so i thin...

I recieved PLD1 and Kenwood KAC-X401M today all items looks good and he wrapped them in very good

I also found this one from soundstream

i have uninstaled that kinda sub from bmw cabrio, when i was redo all the install of that car :D ant its really not so good playing...lol its plastic! dont waste your money on that kaka :) if you want to have a perfect box in all ways, you have to have a round box without any corners :D death star ...

I will put the distro block on the back and cut out foam on the seat where it will go, i will run the soft new wire through the back plate that will be better but first i need to figure out if i will buy a sub enclosure pre cut to the spare wheel hole or if im going to buy a thin box and but it on t...

I did not think of that i will do that if i dont move them, thank you for the advice

I was thinking on it but im not gonna have it there its just so its out of the way when im doing the subwoofer box, There is also a problem with rear seats they are so close to the back plate so its nearly imposible to get on when i put them back there. Its my daily driving car so its taking forever...

I got it a litle better i dont know what im going to do with subwoofer box yet so its just so i can play music.

Well i have tested the rca and they are all giving the same ohm as a new one i got, i also tested with my ground zero and its not making any noise so i think it got to have something to do with the sensetivity of the amplifier. I have a clip on my cellphone with the sound but i do not know how i upl...

Well i riped everything out and started to think about what im going to do with it for now, a ready trunk box will set me back 200$ with the shipping. Think i will buy one and fit the amplifiers for good and use the back plate for now, think i will fit the amplifier after i get it innstaled cause i ...

Love the look of the Mosconi amps they have good sound in them to, im ok with the wires showing as long as it looks good dont get me wrong i love to hide them but i do not have a router or the skill to do it. Do you use mdf on the false floor?, im thinking of buying a round box that goes in the spar...

a few examples of one of my installs. That looks great does your wire show when you are finished?, and does your ground go from the battery to chassis and then to the trunk? My wires are going going on top so they are in the open, i was thinking of buying a sub box to put in the spare wheel and mon...