What are your crossover points set at ?

Glad I could help out.

This glue works great on rubber or foam. I've used it on 4 subs so far and it does the job.Local company too!

http://www.simplyspeakers.com/speaker-r ... -3035.html

I made a purchase from Keith and it arrived very quick and it was packed really nice and secure,great communication all the way!!

trickyricky wrote:Swan.

What model would be a good setup to check into ?

if the vehicle has 2 12 volt batteries and it is a negative ground all you have to do is connect the stereo system to 1 of the batteries like on a semi.take the volt meter and confirm the 12 volts where the batteries are connected in series and your good to go,but this is only if you have 2 batterie...

you need to get rid of all the cars you have and get a good one,you have a lot of auto issues.

cover the radiator with dry ice and drive fast but do not speed and keep extra ice in the back seat area.

Sounds like a lot of hot air to me

This is for the 232 but the size is the same as the 230.
http://download.phoenixphorum.com/Manua ... Manual.pdf

Look on the back,it should have a sticker that shows the installed options.

You will have to send the rta to audio control to get the high spl option installed to use the 150db mic with it.

The basscube is a really good piece for dialing in the bass,some links below so you know what it does and it does it so good.I have one in both my Chevy's and also one on my garage sub just for the added punch when working on stuff outside. http://download.phoenixphorum.com/Manuals/Processors/Basscu...

Very nice work! All you need now is a ti bass cube to go with it.

Great guy to deal with,very smooth sale,paid quick and hope to deal again.

http://www.phoenixphorum.com/download/file.php?id=17912

It's just a 4 wire phone cable but the colors need to match up like in the picture.

Thank you, that would be great!

Is there any place to get the isolators for the mounting screws on the bass cube and eq's ?

Awesome guy to deal with,payment was sent right away,smooth sale. Hope to deal again!

here is the mod sheet
http://download.phoenixphorum.com/Manua ... 66_Sub.pdf

I think it has that in the manual on how to move or make some jumpers to do the mod.

Are these rare in the USA? I can't find a dealer in the state.

These look good in the reviews,great tweets.They are made by the same factory and people that were MB Quart back in the day.
http://www.german-maestro.de/downloads/ ... 509_en.pdf

http://www.german-maestro.de/EN/st40ws.htm

You can take the cable off that goes to the speedo and connect it to a drill motor. Start it on a slow speed,drill will have to run in reverse and have someone watch it as you speed the drill up and see what it does. If the speedo is still jumping that will tell you the speedo is bad and rule out th...

Does it have cruise control ? If it does it will have a servo on the driver side fender that the cable goes to from the transmission then another cable to the speedo that might have a bad gear in it. But check the cables first. It sounds to me like it's the speedo itself as that was a problem with t...